From 464b43392adffc675bdd2e522324fada63e7e049 Mon Sep 17 00:00:00 2001 From: Rosiak Date: Tue, 28 Jul 2015 23:51:40 +0200 Subject: [PATCH] Convert SMI-MIB With dos2unix as suggested by @job --- mibs/SML-MIB | 1836 +++++++++++++++++++++++++------------------------- 1 file changed, 918 insertions(+), 918 deletions(-) diff --git a/mibs/SML-MIB b/mibs/SML-MIB index 949bb228e..13397fc4f 100644 --- a/mibs/SML-MIB +++ b/mibs/SML-MIB @@ -1,918 +1,918 @@ - --- SML MIB Rev 1.12 --- ASN.1 code created using dot2asn --- by Jeff Bain --- Hewlett Packard, Storage Systems Division --- Greeley, CO --- jeff_bain@hp.com - -SML-MIB - DEFINITIONS ::= BEGIN - - IMPORTS - - OBJECT-TYPE - FROM RFC-1212 - enterprises - FROM RFC1155-SMI - DisplayString - FROM RFC1213-MIB - ; - --- Textual Conventions - -UShortReal ::= INTEGER (0..'ffff'h) --- This textual convention can be used to represent short --- unsigned 'real' numbers. Using this variable type, --- a 3 digit number with 2 decimal places (xxx.xx) --- can be represented. For example, 321.45 would be --- represented as 32145" - -CimDateTime ::= OCTET STRING (SIZE (24)) --- This textual convention can be used to represent a date --- and time using the CIM DateTime convention. The bytes are --- as follows: - --- octets contents range --- ====== ======== ===== --- 1-4 year 0000-9999 --- 5-6 month 01-12 --- 7-8 day 01-31 --- 9-10 hour 00-23 --- 11-12 minute 00-59 --- 13-14 second 00-59 --- 15-20 microseconds 000000-999999 --- 21 sign '+' or '-' --- 22-24 UTC offset in minutes 000-839 - --- For example, Monday, May 25, 1998, at 1:30:15 PM EST would be --- represented as 19980525133015000000-300 - --- Note that values must be zero-padded so that the entire --- string is always the same 25-character length. Fields that --- are not significant can be replaced with asterisk characters" - -UINT64 ::= OCTET STRING (SIZE (8)) --- This textual convention can be used to represent 64-bit --- numbers using the OCTET STRING type. SNMPv2 supports a --- Counter64 type, but there is no C-language mapping for a --- 64-bit variable that's much better than an array of 8 bytes - -UINT32 ::= INTEGER (0..'7fffffff'h) -UINT16 ::= INTEGER (0..'ffff'h) --- MIB Fields - - -ibm OBJECT IDENTIFIER ::= { enterprises 2 } - -ibmProd OBJECT IDENTIFIER ::= { ibm 6 } - -ibm3584 OBJECT IDENTIFIER ::= { ibmProd 182 } - - -smlRoot OBJECT IDENTIFIER ::= { ibm3584 3 } - - - -smlMibVersion OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..4)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This string contains version information for the MIB file" - ::= { smlRoot 1 } - -smlCimVersion OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..4)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This string contains information about the CIM version that corresponds to - the MIB. The decriptions in this MIB file are based on CIM version 2.7, as - documented by Steve Jerman for HP." - ::= { smlRoot 2 } - -productGroup - OBJECT IDENTIFIER - ::= { smlRoot 3 } - -product-Name OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Commonly used Product name." - ::= { productGroup 1 } - -product-IdentifyingNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Product identification such as a serial number on software, a die - number on a hardware chip, or (for non-commercial Products) a project number." - ::= { productGroup 2 } - -product-Vendor OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The name of the Product's supplier, or entity selling the Product - (the manufacturer, reseller, OEM, etc.). Corresponds to the Vendor - property in the Product object in the DMTF Solution Exchange Standard." - ::= { productGroup 3 } - -product-Version OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Product version information. Corresponds to the Version property in the - Product object in the DMTF Solution Exchange Standard." - ::= { productGroup 4 } - -chassisGroup - OBJECT IDENTIFIER - - ::= { smlRoot 4 } - -chassis-Manufacturer OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The name of the organization responsible for producing the PhysicalElement. - This may be the entity from whom the Element is purchased, but this is not - necessarily true. The latter information is contained in the Vendor property - of CIM_Product." - ::= { chassisGroup 1 } - -chassis-Model OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The name by which the PhysicalElement is generally known." - ::= { chassisGroup 2 } - -chassis-SerialNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A manufacturer-allocated number used to identify the Physical Element." - ::= { chassisGroup 3 } - -chassis-LockPresent OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Boolean indicating whether the Frame is protected with a lock." - ::= { chassisGroup 4 } - -chassis-SecurityBreach OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - other (1), - noBreach (2), - breachAttempted (3) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "SecurityBreach is an enumerated, integer-valued property indicating whether - a physical breach of the Frame was attempted but unsuccessful (value=4) or - attempted and successful (5). Also, the values, 'Unknown', 'Other' or 'No Breach', - can be specified." - ::= { chassisGroup 5 } - -chassis-IsLocked OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Boolean indicating that the Frame is currently locked." - ::= { chassisGroup 6 } - -storageLibraryGroup - OBJECT IDENTIFIER - ::= { smlRoot 5 } - -storageLibrary-Name OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The inherited Name serves as key of a System instance in an enterprise environment." - ::= { storageLibraryGroup 1 } - -storageLibrary-Description OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Description property provides a textual description of the object." - ::= { storageLibraryGroup 2 } - -storageLibrary-Caption OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Caption property is a short textual description (one- line string) of the object." - ::= { storageLibraryGroup 3 } - -storageLibrary-Status OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..10)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A string indicating the current status of the object. - Various operational and non-operational statuses are defined. - This property is deprecated in lieu of OperationalStatus, which includes - the same semantics in its enumeration. This change is made for three reasons: - 1) Status is more correctly defined as an array property. This overcomes the - limitation of describing status via a single value, when it is really a - multi-valued property (for example, an element may be OK AND Stopped. - 2) A MaxLen of 10 is too restrictive and leads to unclear enumerated values. And, - 3) The change to a uint16 data type was discussed when CIM V2.0 was defined. - However, existing V1.0 implementations used the string property and did not want - to modify their code. Therefore, Status was grandfathered into the Schema. Use - of the Deprecated qualifier allows the maintenance of the existing property, but - also permits an improved definition using OperationalStatus." - ::= { storageLibraryGroup 4 } - -storageLibrary-InstallDate OBJECT-TYPE - SYNTAX CimDateTime - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A datetime value indicating when the object was installed. A lack of a value - does not indicate that the object is not installed." - ::= { storageLibraryGroup 5 } - -mediaAccessDeviceGroup - OBJECT IDENTIFIER - ::= { smlRoot 6 } - -numberOfMediaAccessDevices OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This value specifies the number of MediaAccessDevices that are present." - ::= { mediaAccessDeviceGroup 1 } - -mediaAccessDeviceTable OBJECT-TYPE - SYNTAX SEQUENCE OF TableInfo-1 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "A MediaAccessDevice represents the ability to access one or more media - and use this media to store and retrieve data." - ::= { mediaAccessDeviceGroup 2 } - -mediaAccessDeviceEntry OBJECT-TYPE - SYNTAX TableInfo-1 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Each entry in the table contains information about a MediaAccessDevice - that is present in the library." - INDEX { mediaAccessDeviceIndex } - ::= { mediaAccessDeviceTable 1 } - -TableInfo-1 ::= SEQUENCE -{ - mediaAccessDeviceIndex UINT32, - mediaAccessDeviceObjectType INTEGER, - mediaAccessDevice-Name DisplayString, - mediaAccessDevice-Status DisplayString, - mediaAccessDevice-Availability INTEGER, - mediaAccessDevice-NeedsCleaning INTEGER -} - -mediaAccessDeviceIndex OBJECT-TYPE - SYNTAX UINT32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current index value for the MediaAccessDevice." - ::= { mediaAccessDeviceEntry 1 } - -mediaAccessDeviceObjectType OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - wormDrive (1), - magnetoOpticalDrive (2), - tapeDrive (3), - dvdDrive (4), - cdromDrive (5) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "In the 2.7 CIM Schema a Type property is no longer associated with - MediaAccessDevice. However, it can be used here to specify the type of drive - that is present." - ::= { mediaAccessDeviceEntry 2 } - -mediaAccessDevice-Name OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The Name property defines the label by which the object is - known. When subclassed, the Name property can be overridden - to be a Key property." - ::= { mediaAccessDeviceEntry 3 } - -mediaAccessDevice-Status OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..10)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A string indicating the current status of the object. Various - operational and non-operational statuses are defined. This - property is deprecated in lieu of OperationalStatus, which - includes the same semantics in its enumeration. This change - is made for three reasons: - 1) Status is more correctly defined - as an array property. This overcomes the limitation of describing - status via a single value, when it is really a multi-valued property - (for example, an element may be OK AND Stopped. - 2) A MaxLen of 10 is too restrictive and leads to unclear enumerated - values. And, - 3) The change to a uint16 data type was discussed when CIM V2.0 was - defined. However, existing V1.0 implementations used the string property - and did not want to modify their code. Therefore, Status was grandfathered - into the Schema. Use of the Deprecated qualifier allows the maintenance - of the existing property, but also permits an improved definition using - OperationalStatus." - ::= { mediaAccessDeviceEntry 4 } - -mediaAccessDevice-Availability OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - other (1), - runningFullPower (2), - warning (3), - inTest (4), - notApplicable (5), - powerOff (6), - offLine (7), - offDuty (8), - degraded (9), - notInstalled (10), - installError (11), - powerSaveUnknown (12), - powerSaveLowPowerMode (13), - powerSaveStandby (14), - powerCycle (15), - powerSaveWarning (16), - paused (17), - notReady (18) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The primary availability and status of the Device. (Additional status - information can be specified using the AdditionalAvailability array property.) - For example, the Availability property indicates that the Device is running and - has full power (value=3), or is in a warning (4), test (5), degraded (10) or - power save state (values 13-15 and 17). Regarding the Power Save states, these - are defined as follows: Value 13 ('Power Save - Unknown') indicates that the - Device is known to be in a power save mode, but its exact status in this mode - is unknown; 14 ('Power Save - Low Power Mode') indicates that the Device is in - a power save state but still functioning, and may exhibit degraded performance; - 15 ('Power Save - Standby') describes that the Device is not functioning but - could be brought to full power 'quickly'; and value 17 ('Power Save - Warning') - indicates that the Device is in a warning state, though also in a power save mode." - ::= { mediaAccessDeviceEntry 5 } - -mediaAccessDevice-NeedsCleaning OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Boolean indicating that the MediaAccessDevice needs cleaning. Whether manual - or automatic cleaning is possible is indicated in the Capabilities array property. " - ::= { mediaAccessDeviceEntry 6 } - -physicalMediaGroup - OBJECT IDENTIFIER - ::= { smlRoot 7 } - -numberOfPhysicalMedias OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This value specifies the number of PhysicalMedia that are present." - ::= { physicalMediaGroup 1 } - -physicalMediaTable OBJECT-TYPE - SYNTAX SEQUENCE OF TableInfo-2 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The PhysicalMedia class represents any type of documentation or storage - medium, such as tapes, CDROMs, etc. This class is typically used to locate - and manage Removable Media (versus Media sealed with the MediaAccessDevice, - as a single Package, as is the case with hard disks). However, 'sealed' Media - can also be modeled using this class, where the Media would then be associated - with the PhysicalPackage using the PackagedComponent relationship." - ::= { physicalMediaGroup 2 } - -physicalMediaEntry OBJECT-TYPE - SYNTAX TableInfo-2 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Each entry in the table contains information about a PhysicalMedia - that is present in the library." - INDEX { physicalMediaIndex } - ::= { physicalMediaTable 1 } - -TableInfo-2 ::= SEQUENCE -{ - physicalMediaIndex UINT32, - physicalMediaObjectType INTEGER, - physicalMedia-Removable INTEGER, - physicalMedia-Replaceable INTEGER, - physicalMedia-HotSwappable INTEGER, - physicalMedia-Capacity UINT64, - physicalMedia-MediaType INTEGER, - physicalMedia-MediaDescription DisplayString, - physicalMedia-CleanerMedia INTEGER, - physicalMedia-DualSided INTEGER, - physicalMedia-PhysicalLabel DisplayString -} - -physicalMediaIndex OBJECT-TYPE - SYNTAX UINT32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current index value for the PhysicalMedia." - ::= { physicalMediaEntry 1 } - -physicalMediaObjectType OBJECT-TYPE - SYNTAX INTEGER { - tape (0), - other (1) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "In the 2.7 CIM Schema a Type property is no longer associated with - physicalMedia. The MediaType property provides more detailed information." - ::= { physicalMediaEntry 2 } - -physicalMedia-Removable OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A PhysicalComponent is Removable if it is designed to be taken in and out - of the physical container in which it is normally found, without impairing - the function of the overall packaging. A Component can still be Removable - if power must be 'off' in order to perform the removal. If power can be - 'on' and the Component removed, then the Element is both Removable and - HotSwappable. For example, an upgradeable Processor chip is Removable." - ::= { physicalMediaEntry 3 } - -physicalMedia-Replaceable OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A PhysicalComponent is Replaceable if it is possible to replace (FRU or - upgrade) the Element with a physically different one. For example, some - ComputerSystems allow the main Processor chip to be upgraded to one of - a higher clock rating. In this case, the Processor is said to be Replaceable. - All Removable Components are inherently Replaceable." - ::= { physicalMediaEntry 4 } - -physicalMedia-HotSwappable OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A PhysicalComponent is HotSwappable if it is possible to replace the Element - with a physically different but equivalent one while the containing Package - has power applied to it (ie, is 'on'). For example, a fan Component may be - designed to be HotSwappable. All HotSwappable Components are inherently Removable - and Replaceable." - ::= { physicalMediaEntry 5 } - -physicalMedia-Capacity OBJECT-TYPE - SYNTAX UINT64 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The number of bytes that can be read from or written to a Media. This - property is not applicable to 'Hard Copy' (documentation) or cleaner Media. - Data compression should not be assumed, as it would increase the value in - this property. For tapes, it should be assumed that no filemarks or blank - space areas are recorded on the Media." - ::= { physicalMediaEntry 6 } - -physicalMedia-MediaType OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - other (1), - tape (2), - qic (3), - ait (4), - dtf (5), - dat (6), - eightmmTape (7), - nineteenmmTape (8), - dlt (9), - halfInchMO (10), - catridgeDisk (11), - jazDisk (12), - zipDisk (13), - syQuestDisk (14), - winchesterDisk (15), - cdRom (16), - cdRomXA (17), - cdI (18), - cdRecordable (19), - dvd (20), - dvdRWPlus (21), - dvdRAM (22), - dvdROM (23), - dvdVideo (24), - divx (25), - cdRW (26), - cdDA (27), - cdPlus (28), - dvdRecordable (29), - dvdRW (30), - dvdAudio (31), - dvd5 (32), - dvd9 (33), - dvd10 (34), - dvd18 (35), - moRewriteable (36), - moWriteOnce (37), - moLIMDOW (38), - phaseChangeWO (39), - phaseChangeRewriteable (40), - phaseChangeDualRewriteable (41), - ablativeWriteOnce (42), - nearField (43), - miniQic (44), - travan (45), - eightmmMetal (46), - eightmmAdvanced (47), - nctp (48), - ltoUltrium (49), - ltoAccelis (50), - tape9Track (51), - tape18Track (52), - tape36Track (53), - magstar3590 (54), - magstarMP (55), - d2Tape (56), - dstSmall (57), - dstMedium (58), - dstLarge (59) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Specifies the type of the PhysicalMedia, as an enumerated integer. The - MediaDescription property is used to provide more explicit definition of - the Media type, whether it is pre-formatted, compatability features, etc." - ::= { physicalMediaEntry 7 } - -physicalMedia-MediaDescription OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Additional detail related to the MediaType enumeration. For example, if - value 3 ('QIC Cartridge') is specified, this property could indicate whether - the tape is wide or 1/4 inch, whether it is pre-formatted, whether it is Travan - compatible, etc." - ::= { physicalMediaEntry 8 } - -physicalMedia-CleanerMedia OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Boolean indicating that the PhysicalMedia is used for cleaning purposes and - not data storage." - ::= { physicalMediaEntry 9 } - -physicalMedia-DualSided OBJECT-TYPE - SYNTAX INTEGER { - unknown (0), - true (1), - false (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Boolean indicating that the Media has two recording sides (TRUE) or only a - single side (FALSE). Examples of dual sided Media include DVD-ROM and some - optical disks. Examples of single sided Media are tapes and CD-ROM." - ::= { physicalMediaEntry 10 } - -physicalMedia-PhysicalLabel OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "One or more strings on 'labels' on the PhysicalMedia. The format of the - labels and their state (readable, unreadable, upside-down) are indicated in - the LabelFormats and LabelStates array properties." - ::= { physicalMediaEntry 11 } - -physicalPackageGroup - OBJECT IDENTIFIER - ::= { smlRoot 8 } - -numberOfPhysicalPackages OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This value specifies the number of PhysicalPackages that are present." - ::= { physicalPackageGroup 1 } - -physicalPackageTable OBJECT-TYPE - SYNTAX SEQUENCE OF TableInfo-3 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The PhysicalPackage class represents PhysicalElements that contain or host - other components. Examples are a Rack enclosure or an adapter Card. (also a - tape magazine inside an auto-loader)" - ::= { physicalPackageGroup 2 } - -physicalPackageEntry OBJECT-TYPE - SYNTAX TableInfo-3 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Each entry in the table contains information about a PhysicalPackage - that is present in the library." - INDEX { physicalPackageIndex } - ::= { physicalPackageTable 1 } - -TableInfo-3 ::= SEQUENCE -{ - physicalPackageIndex UINT32, - physicalPackage-Manufacturer DisplayString, - physicalPackage-Model DisplayString, - physicalPackage-SerialNumber DisplayString, - physicalPackage-Realizes-MediaAccessDeviceIndex INTEGER -} - -physicalPackageIndex OBJECT-TYPE - SYNTAX UINT32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current index value for the PhysicalPackage." - ::= { physicalPackageEntry 1 } - -physicalPackage-Manufacturer OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The name of the organization responsible for producing the PhysicalElement. - This may be the entity from whom the Element is purchased, but this is not - necessarily true. The latter information is contained in the Vendor property - of CIM_Product." - ::= { physicalPackageEntry 2 } - -physicalPackage-Model OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The name by which the PhysicalElement is generally known." - ::= { physicalPackageEntry 3 } - -physicalPackage-SerialNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "A manufacturer-allocated number used to identify the Physical Element." - ::= { physicalPackageEntry 4 } - -physicalPackage-Realizes-MediaAccessDeviceIndex OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The index value of the the MediaAccess device that is associated with - this physical package.'" - ::= { physicalPackageEntry 5 } - -softwareElementGroup - OBJECT IDENTIFIER - ::= { smlRoot 9 } - -numberOfSoftwareElements OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This value specifies the number of SoftwareElements that are present." - ::= { softwareElementGroup 1 } - -softwareElementTable OBJECT-TYPE - SYNTAX SEQUENCE OF TableInfo-4 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "The CIM_SoftwareElement class is used to decompose a CIM_SoftwareFeature - object into a set of individually manageable or deployable parts for a - particular platform. A software element's platform is uniquely identified - by its underlying hardware architecture and operating system (for example - Sun Solaris on Sun Sparc or Windows NT on Intel). As such, to understand - the details of how the functionality of a particular software feature is - provided on a particular platform, the CIM_SoftwareElement objects referenced - by CIM_SoftwareFeatureSoftwareElement associations are organized in disjoint - sets based on the TargetOperatingSystem property. A CIM_SoftwareElement - object captures the management details of a part or component in one of four - states characterized by the SoftwareElementState property. " - ::= { softwareElementGroup 2 } - -softwareElementEntry OBJECT-TYPE - SYNTAX TableInfo-4 - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Each entry in the table contains information about a SoftwareElement - that is present in the library." - INDEX { softwareElementIndex } - ::= { softwareElementTable 1 } - -TableInfo-4 ::= SEQUENCE -{ - softwareElementIndex UINT32, - softwareElement-Name DisplayString, - softwareElement-Version DisplayString, - softwareElement-SoftwareElementID DisplayString, - softwareElement-Manufacturer DisplayString, - softwareElement-BuildNumber DisplayString, - softwareElement-SerialNumber DisplayString, - softwareElement-CodeSet DisplayString, - softwareElement-IdentificationCode DisplayString, - softwareElement-LanguageEdition DisplayString, - softwareElement-Associations OBJECT IDENTIFIER, - softwareElement-DeviceSoftware-LogicalDeviceAssociation-ObjectT INTEGER, - softwareElement-DeviceSoftware-LogicalDeviceAssociationId INTEGER -} - -softwareElementIndex OBJECT-TYPE - SYNTAX UINT32 - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The current index value for the SoftwareElement." - ::= { softwareElementEntry 1 } - -softwareElement-Name OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The name used to identify this software element" - ::= { softwareElementEntry 2 } - -softwareElement-Version OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Version should be in the form .. or . " - ::= { softwareElementEntry 3 } - -softwareElement-SoftwareElementID OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..255)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "This is an identifier for this software element and is designed to be used - in conjunction with other keys to create a unique representation of this - SoftwareElement" - ::= { softwareElementEntry 4 } - -softwareElement-Manufacturer OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Manufacturer of this software element" - ::= { softwareElementEntry 5 } - -softwareElement-BuildNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The internal identifier for this compilation of this software element." - ::= { softwareElementEntry 6 } - -softwareElement-SerialNumber OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The assigned serial number of this software element." - ::= { softwareElementEntry 7 } - -softwareElement-CodeSet OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The code set used by this software element. " - ::= { softwareElementEntry 8 } - -softwareElement-IdentificationCode OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..64)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The value of this property is the manufacturer's identifier for this - software element. Often this will be a stock keeping unit (SKU) or a - part number." - ::= { softwareElementEntry 9 } - -softwareElement-LanguageEdition OBJECT-TYPE - SYNTAX DisplayString (SIZE (0..32)) - ACCESS read-only - STATUS mandatory - DESCRIPTION - "The value of this property identifies the language edition of this software - element. The language codes defined in ISO 639 should be used. Where the - software element represents multi-lingual or international version of a - product, the string multilingual should be used." - ::= { softwareElementEntry 10 } - -softwareElement-Associations OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Use this value to associate a SoftwareElement with another object in the MIB" - ::= { softwareElementEntry 11 } - -softwareElement-DeviceSoftware-LogicalDeviceAssociation-ObjectT OBJECT-TYPE - SYNTAX INTEGER { - mediaAccessDevice (0), - storageLibrary (1), - other (2) } - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Use this value to associate a SoftwareElement with a specific media access - device or the library itself." - ::= { softwareElementEntry 12 } - -softwareElement-DeviceSoftware-LogicalDeviceAssociationId OBJECT-TYPE - SYNTAX INTEGER - ACCESS read-only - STATUS mandatory - DESCRIPTION - "Further clarification required." - ::= { softwareElementEntry 13 } - -endOfSmlMib OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - ACCESS not-accessible - STATUS mandatory - DESCRIPTION - "Description here" - ::= { smlRoot 10 } - -END + +-- SML MIB Rev 1.12 +-- ASN.1 code created using dot2asn +-- by Jeff Bain +-- Hewlett Packard, Storage Systems Division +-- Greeley, CO +-- jeff_bain@hp.com + +SML-MIB + DEFINITIONS ::= BEGIN + + IMPORTS + + OBJECT-TYPE + FROM RFC-1212 + enterprises + FROM RFC1155-SMI + DisplayString + FROM RFC1213-MIB + ; + +-- Textual Conventions + +UShortReal ::= INTEGER (0..'ffff'h) +-- This textual convention can be used to represent short +-- unsigned 'real' numbers. Using this variable type, +-- a 3 digit number with 2 decimal places (xxx.xx) +-- can be represented. For example, 321.45 would be +-- represented as 32145" + +CimDateTime ::= OCTET STRING (SIZE (24)) +-- This textual convention can be used to represent a date +-- and time using the CIM DateTime convention. The bytes are +-- as follows: + +-- octets contents range +-- ====== ======== ===== +-- 1-4 year 0000-9999 +-- 5-6 month 01-12 +-- 7-8 day 01-31 +-- 9-10 hour 00-23 +-- 11-12 minute 00-59 +-- 13-14 second 00-59 +-- 15-20 microseconds 000000-999999 +-- 21 sign '+' or '-' +-- 22-24 UTC offset in minutes 000-839 + +-- For example, Monday, May 25, 1998, at 1:30:15 PM EST would be +-- represented as 19980525133015000000-300 + +-- Note that values must be zero-padded so that the entire +-- string is always the same 25-character length. Fields that +-- are not significant can be replaced with asterisk characters" + +UINT64 ::= OCTET STRING (SIZE (8)) +-- This textual convention can be used to represent 64-bit +-- numbers using the OCTET STRING type. SNMPv2 supports a +-- Counter64 type, but there is no C-language mapping for a +-- 64-bit variable that's much better than an array of 8 bytes + +UINT32 ::= INTEGER (0..'7fffffff'h) +UINT16 ::= INTEGER (0..'ffff'h) +-- MIB Fields + + +ibm OBJECT IDENTIFIER ::= { enterprises 2 } + +ibmProd OBJECT IDENTIFIER ::= { ibm 6 } + +ibm3584 OBJECT IDENTIFIER ::= { ibmProd 182 } + + +smlRoot OBJECT IDENTIFIER ::= { ibm3584 3 } + + + +smlMibVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..4)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This string contains version information for the MIB file" + ::= { smlRoot 1 } + +smlCimVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..4)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This string contains information about the CIM version that corresponds to + the MIB. The decriptions in this MIB file are based on CIM version 2.7, as + documented by Steve Jerman for HP." + ::= { smlRoot 2 } + +productGroup + OBJECT IDENTIFIER + ::= { smlRoot 3 } + +product-Name OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Commonly used Product name." + ::= { productGroup 1 } + +product-IdentifyingNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Product identification such as a serial number on software, a die + number on a hardware chip, or (for non-commercial Products) a project number." + ::= { productGroup 2 } + +product-Vendor OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the Product's supplier, or entity selling the Product + (the manufacturer, reseller, OEM, etc.). Corresponds to the Vendor + property in the Product object in the DMTF Solution Exchange Standard." + ::= { productGroup 3 } + +product-Version OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Product version information. Corresponds to the Version property in the + Product object in the DMTF Solution Exchange Standard." + ::= { productGroup 4 } + +chassisGroup + OBJECT IDENTIFIER + + ::= { smlRoot 4 } + +chassis-Manufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the organization responsible for producing the PhysicalElement. + This may be the entity from whom the Element is purchased, but this is not + necessarily true. The latter information is contained in the Vendor property + of CIM_Product." + ::= { chassisGroup 1 } + +chassis-Model OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name by which the PhysicalElement is generally known." + ::= { chassisGroup 2 } + +chassis-SerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A manufacturer-allocated number used to identify the Physical Element." + ::= { chassisGroup 3 } + +chassis-LockPresent OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Boolean indicating whether the Frame is protected with a lock." + ::= { chassisGroup 4 } + +chassis-SecurityBreach OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + other (1), + noBreach (2), + breachAttempted (3) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "SecurityBreach is an enumerated, integer-valued property indicating whether + a physical breach of the Frame was attempted but unsuccessful (value=4) or + attempted and successful (5). Also, the values, 'Unknown', 'Other' or 'No Breach', + can be specified." + ::= { chassisGroup 5 } + +chassis-IsLocked OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Boolean indicating that the Frame is currently locked." + ::= { chassisGroup 6 } + +storageLibraryGroup + OBJECT IDENTIFIER + ::= { smlRoot 5 } + +storageLibrary-Name OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The inherited Name serves as key of a System instance in an enterprise environment." + ::= { storageLibraryGroup 1 } + +storageLibrary-Description OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Description property provides a textual description of the object." + ::= { storageLibraryGroup 2 } + +storageLibrary-Caption OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Caption property is a short textual description (one- line string) of the object." + ::= { storageLibraryGroup 3 } + +storageLibrary-Status OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..10)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A string indicating the current status of the object. + Various operational and non-operational statuses are defined. + This property is deprecated in lieu of OperationalStatus, which includes + the same semantics in its enumeration. This change is made for three reasons: + 1) Status is more correctly defined as an array property. This overcomes the + limitation of describing status via a single value, when it is really a + multi-valued property (for example, an element may be OK AND Stopped. + 2) A MaxLen of 10 is too restrictive and leads to unclear enumerated values. And, + 3) The change to a uint16 data type was discussed when CIM V2.0 was defined. + However, existing V1.0 implementations used the string property and did not want + to modify their code. Therefore, Status was grandfathered into the Schema. Use + of the Deprecated qualifier allows the maintenance of the existing property, but + also permits an improved definition using OperationalStatus." + ::= { storageLibraryGroup 4 } + +storageLibrary-InstallDate OBJECT-TYPE + SYNTAX CimDateTime + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A datetime value indicating when the object was installed. A lack of a value + does not indicate that the object is not installed." + ::= { storageLibraryGroup 5 } + +mediaAccessDeviceGroup + OBJECT IDENTIFIER + ::= { smlRoot 6 } + +numberOfMediaAccessDevices OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This value specifies the number of MediaAccessDevices that are present." + ::= { mediaAccessDeviceGroup 1 } + +mediaAccessDeviceTable OBJECT-TYPE + SYNTAX SEQUENCE OF TableInfo-1 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A MediaAccessDevice represents the ability to access one or more media + and use this media to store and retrieve data." + ::= { mediaAccessDeviceGroup 2 } + +mediaAccessDeviceEntry OBJECT-TYPE + SYNTAX TableInfo-1 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in the table contains information about a MediaAccessDevice + that is present in the library." + INDEX { mediaAccessDeviceIndex } + ::= { mediaAccessDeviceTable 1 } + +TableInfo-1 ::= SEQUENCE +{ + mediaAccessDeviceIndex UINT32, + mediaAccessDeviceObjectType INTEGER, + mediaAccessDevice-Name DisplayString, + mediaAccessDevice-Status DisplayString, + mediaAccessDevice-Availability INTEGER, + mediaAccessDevice-NeedsCleaning INTEGER +} + +mediaAccessDeviceIndex OBJECT-TYPE + SYNTAX UINT32 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current index value for the MediaAccessDevice." + ::= { mediaAccessDeviceEntry 1 } + +mediaAccessDeviceObjectType OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + wormDrive (1), + magnetoOpticalDrive (2), + tapeDrive (3), + dvdDrive (4), + cdromDrive (5) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "In the 2.7 CIM Schema a Type property is no longer associated with + MediaAccessDevice. However, it can be used here to specify the type of drive + that is present." + ::= { mediaAccessDeviceEntry 2 } + +mediaAccessDevice-Name OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The Name property defines the label by which the object is + known. When subclassed, the Name property can be overridden + to be a Key property." + ::= { mediaAccessDeviceEntry 3 } + +mediaAccessDevice-Status OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..10)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A string indicating the current status of the object. Various + operational and non-operational statuses are defined. This + property is deprecated in lieu of OperationalStatus, which + includes the same semantics in its enumeration. This change + is made for three reasons: + 1) Status is more correctly defined + as an array property. This overcomes the limitation of describing + status via a single value, when it is really a multi-valued property + (for example, an element may be OK AND Stopped. + 2) A MaxLen of 10 is too restrictive and leads to unclear enumerated + values. And, + 3) The change to a uint16 data type was discussed when CIM V2.0 was + defined. However, existing V1.0 implementations used the string property + and did not want to modify their code. Therefore, Status was grandfathered + into the Schema. Use of the Deprecated qualifier allows the maintenance + of the existing property, but also permits an improved definition using + OperationalStatus." + ::= { mediaAccessDeviceEntry 4 } + +mediaAccessDevice-Availability OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + other (1), + runningFullPower (2), + warning (3), + inTest (4), + notApplicable (5), + powerOff (6), + offLine (7), + offDuty (8), + degraded (9), + notInstalled (10), + installError (11), + powerSaveUnknown (12), + powerSaveLowPowerMode (13), + powerSaveStandby (14), + powerCycle (15), + powerSaveWarning (16), + paused (17), + notReady (18) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The primary availability and status of the Device. (Additional status + information can be specified using the AdditionalAvailability array property.) + For example, the Availability property indicates that the Device is running and + has full power (value=3), or is in a warning (4), test (5), degraded (10) or + power save state (values 13-15 and 17). Regarding the Power Save states, these + are defined as follows: Value 13 ('Power Save - Unknown') indicates that the + Device is known to be in a power save mode, but its exact status in this mode + is unknown; 14 ('Power Save - Low Power Mode') indicates that the Device is in + a power save state but still functioning, and may exhibit degraded performance; + 15 ('Power Save - Standby') describes that the Device is not functioning but + could be brought to full power 'quickly'; and value 17 ('Power Save - Warning') + indicates that the Device is in a warning state, though also in a power save mode." + ::= { mediaAccessDeviceEntry 5 } + +mediaAccessDevice-NeedsCleaning OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Boolean indicating that the MediaAccessDevice needs cleaning. Whether manual + or automatic cleaning is possible is indicated in the Capabilities array property. " + ::= { mediaAccessDeviceEntry 6 } + +physicalMediaGroup + OBJECT IDENTIFIER + ::= { smlRoot 7 } + +numberOfPhysicalMedias OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This value specifies the number of PhysicalMedia that are present." + ::= { physicalMediaGroup 1 } + +physicalMediaTable OBJECT-TYPE + SYNTAX SEQUENCE OF TableInfo-2 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The PhysicalMedia class represents any type of documentation or storage + medium, such as tapes, CDROMs, etc. This class is typically used to locate + and manage Removable Media (versus Media sealed with the MediaAccessDevice, + as a single Package, as is the case with hard disks). However, 'sealed' Media + can also be modeled using this class, where the Media would then be associated + with the PhysicalPackage using the PackagedComponent relationship." + ::= { physicalMediaGroup 2 } + +physicalMediaEntry OBJECT-TYPE + SYNTAX TableInfo-2 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in the table contains information about a PhysicalMedia + that is present in the library." + INDEX { physicalMediaIndex } + ::= { physicalMediaTable 1 } + +TableInfo-2 ::= SEQUENCE +{ + physicalMediaIndex UINT32, + physicalMediaObjectType INTEGER, + physicalMedia-Removable INTEGER, + physicalMedia-Replaceable INTEGER, + physicalMedia-HotSwappable INTEGER, + physicalMedia-Capacity UINT64, + physicalMedia-MediaType INTEGER, + physicalMedia-MediaDescription DisplayString, + physicalMedia-CleanerMedia INTEGER, + physicalMedia-DualSided INTEGER, + physicalMedia-PhysicalLabel DisplayString +} + +physicalMediaIndex OBJECT-TYPE + SYNTAX UINT32 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current index value for the PhysicalMedia." + ::= { physicalMediaEntry 1 } + +physicalMediaObjectType OBJECT-TYPE + SYNTAX INTEGER { + tape (0), + other (1) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "In the 2.7 CIM Schema a Type property is no longer associated with + physicalMedia. The MediaType property provides more detailed information." + ::= { physicalMediaEntry 2 } + +physicalMedia-Removable OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A PhysicalComponent is Removable if it is designed to be taken in and out + of the physical container in which it is normally found, without impairing + the function of the overall packaging. A Component can still be Removable + if power must be 'off' in order to perform the removal. If power can be + 'on' and the Component removed, then the Element is both Removable and + HotSwappable. For example, an upgradeable Processor chip is Removable." + ::= { physicalMediaEntry 3 } + +physicalMedia-Replaceable OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A PhysicalComponent is Replaceable if it is possible to replace (FRU or + upgrade) the Element with a physically different one. For example, some + ComputerSystems allow the main Processor chip to be upgraded to one of + a higher clock rating. In this case, the Processor is said to be Replaceable. + All Removable Components are inherently Replaceable." + ::= { physicalMediaEntry 4 } + +physicalMedia-HotSwappable OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A PhysicalComponent is HotSwappable if it is possible to replace the Element + with a physically different but equivalent one while the containing Package + has power applied to it (ie, is 'on'). For example, a fan Component may be + designed to be HotSwappable. All HotSwappable Components are inherently Removable + and Replaceable." + ::= { physicalMediaEntry 5 } + +physicalMedia-Capacity OBJECT-TYPE + SYNTAX UINT64 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The number of bytes that can be read from or written to a Media. This + property is not applicable to 'Hard Copy' (documentation) or cleaner Media. + Data compression should not be assumed, as it would increase the value in + this property. For tapes, it should be assumed that no filemarks or blank + space areas are recorded on the Media." + ::= { physicalMediaEntry 6 } + +physicalMedia-MediaType OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + other (1), + tape (2), + qic (3), + ait (4), + dtf (5), + dat (6), + eightmmTape (7), + nineteenmmTape (8), + dlt (9), + halfInchMO (10), + catridgeDisk (11), + jazDisk (12), + zipDisk (13), + syQuestDisk (14), + winchesterDisk (15), + cdRom (16), + cdRomXA (17), + cdI (18), + cdRecordable (19), + dvd (20), + dvdRWPlus (21), + dvdRAM (22), + dvdROM (23), + dvdVideo (24), + divx (25), + cdRW (26), + cdDA (27), + cdPlus (28), + dvdRecordable (29), + dvdRW (30), + dvdAudio (31), + dvd5 (32), + dvd9 (33), + dvd10 (34), + dvd18 (35), + moRewriteable (36), + moWriteOnce (37), + moLIMDOW (38), + phaseChangeWO (39), + phaseChangeRewriteable (40), + phaseChangeDualRewriteable (41), + ablativeWriteOnce (42), + nearField (43), + miniQic (44), + travan (45), + eightmmMetal (46), + eightmmAdvanced (47), + nctp (48), + ltoUltrium (49), + ltoAccelis (50), + tape9Track (51), + tape18Track (52), + tape36Track (53), + magstar3590 (54), + magstarMP (55), + d2Tape (56), + dstSmall (57), + dstMedium (58), + dstLarge (59) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Specifies the type of the PhysicalMedia, as an enumerated integer. The + MediaDescription property is used to provide more explicit definition of + the Media type, whether it is pre-formatted, compatability features, etc." + ::= { physicalMediaEntry 7 } + +physicalMedia-MediaDescription OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Additional detail related to the MediaType enumeration. For example, if + value 3 ('QIC Cartridge') is specified, this property could indicate whether + the tape is wide or 1/4 inch, whether it is pre-formatted, whether it is Travan + compatible, etc." + ::= { physicalMediaEntry 8 } + +physicalMedia-CleanerMedia OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Boolean indicating that the PhysicalMedia is used for cleaning purposes and + not data storage." + ::= { physicalMediaEntry 9 } + +physicalMedia-DualSided OBJECT-TYPE + SYNTAX INTEGER { + unknown (0), + true (1), + false (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Boolean indicating that the Media has two recording sides (TRUE) or only a + single side (FALSE). Examples of dual sided Media include DVD-ROM and some + optical disks. Examples of single sided Media are tapes and CD-ROM." + ::= { physicalMediaEntry 10 } + +physicalMedia-PhysicalLabel OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "One or more strings on 'labels' on the PhysicalMedia. The format of the + labels and their state (readable, unreadable, upside-down) are indicated in + the LabelFormats and LabelStates array properties." + ::= { physicalMediaEntry 11 } + +physicalPackageGroup + OBJECT IDENTIFIER + ::= { smlRoot 8 } + +numberOfPhysicalPackages OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This value specifies the number of PhysicalPackages that are present." + ::= { physicalPackageGroup 1 } + +physicalPackageTable OBJECT-TYPE + SYNTAX SEQUENCE OF TableInfo-3 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The PhysicalPackage class represents PhysicalElements that contain or host + other components. Examples are a Rack enclosure or an adapter Card. (also a + tape magazine inside an auto-loader)" + ::= { physicalPackageGroup 2 } + +physicalPackageEntry OBJECT-TYPE + SYNTAX TableInfo-3 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in the table contains information about a PhysicalPackage + that is present in the library." + INDEX { physicalPackageIndex } + ::= { physicalPackageTable 1 } + +TableInfo-3 ::= SEQUENCE +{ + physicalPackageIndex UINT32, + physicalPackage-Manufacturer DisplayString, + physicalPackage-Model DisplayString, + physicalPackage-SerialNumber DisplayString, + physicalPackage-Realizes-MediaAccessDeviceIndex INTEGER +} + +physicalPackageIndex OBJECT-TYPE + SYNTAX UINT32 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current index value for the PhysicalPackage." + ::= { physicalPackageEntry 1 } + +physicalPackage-Manufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name of the organization responsible for producing the PhysicalElement. + This may be the entity from whom the Element is purchased, but this is not + necessarily true. The latter information is contained in the Vendor property + of CIM_Product." + ::= { physicalPackageEntry 2 } + +physicalPackage-Model OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name by which the PhysicalElement is generally known." + ::= { physicalPackageEntry 3 } + +physicalPackage-SerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "A manufacturer-allocated number used to identify the Physical Element." + ::= { physicalPackageEntry 4 } + +physicalPackage-Realizes-MediaAccessDeviceIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The index value of the the MediaAccess device that is associated with + this physical package.'" + ::= { physicalPackageEntry 5 } + +softwareElementGroup + OBJECT IDENTIFIER + ::= { smlRoot 9 } + +numberOfSoftwareElements OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This value specifies the number of SoftwareElements that are present." + ::= { softwareElementGroup 1 } + +softwareElementTable OBJECT-TYPE + SYNTAX SEQUENCE OF TableInfo-4 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The CIM_SoftwareElement class is used to decompose a CIM_SoftwareFeature + object into a set of individually manageable or deployable parts for a + particular platform. A software element's platform is uniquely identified + by its underlying hardware architecture and operating system (for example + Sun Solaris on Sun Sparc or Windows NT on Intel). As such, to understand + the details of how the functionality of a particular software feature is + provided on a particular platform, the CIM_SoftwareElement objects referenced + by CIM_SoftwareFeatureSoftwareElement associations are organized in disjoint + sets based on the TargetOperatingSystem property. A CIM_SoftwareElement + object captures the management details of a part or component in one of four + states characterized by the SoftwareElementState property. " + ::= { softwareElementGroup 2 } + +softwareElementEntry OBJECT-TYPE + SYNTAX TableInfo-4 + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Each entry in the table contains information about a SoftwareElement + that is present in the library." + INDEX { softwareElementIndex } + ::= { softwareElementTable 1 } + +TableInfo-4 ::= SEQUENCE +{ + softwareElementIndex UINT32, + softwareElement-Name DisplayString, + softwareElement-Version DisplayString, + softwareElement-SoftwareElementID DisplayString, + softwareElement-Manufacturer DisplayString, + softwareElement-BuildNumber DisplayString, + softwareElement-SerialNumber DisplayString, + softwareElement-CodeSet DisplayString, + softwareElement-IdentificationCode DisplayString, + softwareElement-LanguageEdition DisplayString, + softwareElement-Associations OBJECT IDENTIFIER, + softwareElement-DeviceSoftware-LogicalDeviceAssociation-ObjectT INTEGER, + softwareElement-DeviceSoftware-LogicalDeviceAssociationId INTEGER +} + +softwareElementIndex OBJECT-TYPE + SYNTAX UINT32 + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The current index value for the SoftwareElement." + ::= { softwareElementEntry 1 } + +softwareElement-Name OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The name used to identify this software element" + ::= { softwareElementEntry 2 } + +softwareElement-Version OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Version should be in the form .. or . " + ::= { softwareElementEntry 3 } + +softwareElement-SoftwareElementID OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "This is an identifier for this software element and is designed to be used + in conjunction with other keys to create a unique representation of this + SoftwareElement" + ::= { softwareElementEntry 4 } + +softwareElement-Manufacturer OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Manufacturer of this software element" + ::= { softwareElementEntry 5 } + +softwareElement-BuildNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The internal identifier for this compilation of this software element." + ::= { softwareElementEntry 6 } + +softwareElement-SerialNumber OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The assigned serial number of this software element." + ::= { softwareElementEntry 7 } + +softwareElement-CodeSet OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The code set used by this software element. " + ::= { softwareElementEntry 8 } + +softwareElement-IdentificationCode OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..64)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of this property is the manufacturer's identifier for this + software element. Often this will be a stock keeping unit (SKU) or a + part number." + ::= { softwareElementEntry 9 } + +softwareElement-LanguageEdition OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..32)) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The value of this property identifies the language edition of this software + element. The language codes defined in ISO 639 should be used. Where the + software element represents multi-lingual or international version of a + product, the string multilingual should be used." + ::= { softwareElementEntry 10 } + +softwareElement-Associations OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Use this value to associate a SoftwareElement with another object in the MIB" + ::= { softwareElementEntry 11 } + +softwareElement-DeviceSoftware-LogicalDeviceAssociation-ObjectT OBJECT-TYPE + SYNTAX INTEGER { + mediaAccessDevice (0), + storageLibrary (1), + other (2) } + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Use this value to associate a SoftwareElement with a specific media access + device or the library itself." + ::= { softwareElementEntry 12 } + +softwareElement-DeviceSoftware-LogicalDeviceAssociationId OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "Further clarification required." + ::= { softwareElementEntry 13 } + +endOfSmlMib OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Description here" + ::= { smlRoot 10 } + +END