From 96869b7f7eb985a981d77016c7c6677bcb11f4f2 Mon Sep 17 00:00:00 2001 From: Tom Laermans Date: Wed, 18 Jan 2012 15:05:55 +0000 Subject: [PATCH] add carel pcoweb mibs for a/c monitoring git-svn-id: http://www.observium.org/svn/observer/trunk@2834 61d68cd4-352d-0410-923a-c4978735b2b8 --- mibs/CAREL-ug40cdz-MIB | 1546 ++++++++++++++++++++++++++++++++++++++++ mibs/UNCDZ-MIB | 1147 +++++++++++++++++++++++++++++ 2 files changed, 2693 insertions(+) create mode 100644 mibs/CAREL-ug40cdz-MIB create mode 100644 mibs/UNCDZ-MIB diff --git a/mibs/CAREL-ug40cdz-MIB b/mibs/CAREL-ug40cdz-MIB new file mode 100644 index 000000000..7f9e462de --- /dev/null +++ b/mibs/CAREL-ug40cdz-MIB @@ -0,0 +1,1546 @@ +-- +-- CAREL-ug40cdz.MIB +-- MIB generated by CAREL +-- Tuesday, 11 April 2006 +-- + + CAREL-ug40cdz-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-GROUP FROM SNMPv2-CONF + sysContact, sysName, + sysLocation FROM SNMPv2-MIB + enterprises, MODULE-IDENTITY, + OBJECT-TYPE, Integer32 FROM SNMPv2-SMI + DisplayString FROM RFC1213-MIB; + + ug40cdzMIB MODULE-IDENTITY + LAST-UPDATED "200604111645Z" -- April 11, 2006 at 16:45 GMT + ORGANIZATION "CAREL SpA" + CONTACT-INFO + " + Carel SpA + Via dell'Industria, 11 + 35020 Brugine (PD) Italy + Tel: +39 049 9716611 + E-mail: carel@carel.com + " + DESCRIPTION + "This is the MIB module for the UG40 Close Control Uniflair device." + REVISION "200604111645Z" -- April 11, 2006 at 16:45 GMT + DESCRIPTION + "This is the original version of the MIB" + ::= { instruments 1 } + +-- +-- Node definitions +-- + + -- 1.3.6.1.4.1.9839 + carel OBJECT IDENTIFIER ::= { enterprises 9839 } + + -- 1.3.6.1.4.1.9839.1 + systm OBJECT IDENTIFIER ::= { carel 1 } + + -- 1.3.6.1.4.1.9839.1.1 + agentRelease OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Release of the Agent." + ::= { systm 1 } + + -- 1.3.6.1.4.1.9839.1.2 + agentCode OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Code of the Agent. 1=WebGate" + ::= { systm 2 } + + -- 1.3.6.1.4.1.9839.2 + instruments OBJECT IDENTIFIER ::= { carel 2 } + + -- 1.3.6.1.4.1.9839.2.0 + webGateInfo OBJECT IDENTIFIER ::= { instruments 0 } + + -- 1.3.6.1.4.1.9839.2.0.1 + agentParameters OBJECT IDENTIFIER ::= { webGateInfo 1 } + + -- 1.3.6.1.4.1.9839.2.0.1.1 + netSize OBJECT-TYPE + SYNTAX Integer32 (1..16) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Network size. It corresponds to the number of units connected to the WebGate. " + ::= { agentParameters 1 } + + -- 1.3.6.1.4.1.9839.2.0.1.2 + baudRate OBJECT-TYPE + SYNTAX Integer32 (1200 | 2400 |4800 |9600 | 19200) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Baudrate of the Carel network. " + ::= { agentParameters 2 } + + -- 1.3.6.1.4.1.9839.2.0.2 + unitTypeGroup OBJECT IDENTIFIER ::= { webGateInfo 2 } + + -- 1.3.6.1.4.1.9839.2.0.2.1 + unit1-Type OBJECT-TYPE + SYNTAX DisplayString + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type of the unit having serial address 1. " + ::= { unitTypeGroup 1 } + + -- ... You will have how many unitX-Type objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.3 + unitCodeGroup OBJECT IDENTIFIER ::= { webGateInfo 3 } + + -- 1.3.6.1.4.1.9839.2.0.3.1 + unit1-Code OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Code of the unit having serial address 1. " + ::= { unitCodeGroup 1 } + + -- ... You will have how many unitX-Code objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.4 + unitSoftwareReleaseGroup OBJECT IDENTIFIER ::= { webGateInfo 4 } + + -- 1.3.6.1.4.1.9839.2.0.3.1 + unit1-SoftwareRelease OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Software release of the unit having serial address 1. " + ::= { unitSoftwareReleaseGroup 1 } + + -- ... You will have how many unitX-SoftwareRelease objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.5 + unitMinSoftwareReleaseGroup OBJECT IDENTIFIER ::= { webGateInfo 5 } + + -- 1.3.6.1.4.1.9839.2.0.5.1 + unit1-MinSoftwareRelease OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Minimum software release of the unit having serial address 1. " + ::= { unitMinSoftwareReleaseGroup 1 } + + -- ... You will have how many unitX-MinSoftwareRelease objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.6 + unitMaxSoftwareReleaseGroup OBJECT IDENTIFIER ::= { webGateInfo 6 } + + -- 1.3.6.1.4.1.9839.2.0.6.1 + unit1-MaxSoftwareRelease OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Maximum software release of the unit having serial address 1. " + ::= { unitMaxSoftwareReleaseGroup 1 } + + -- ... You will have how many unitX-MaxSoftwareRelease objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.7 + unitNoAnswerCounterGroup OBJECT IDENTIFIER ::= { webGateInfo 7 } + + -- 1.3.6.1.4.1.9839.2.0.7.1 + unit1-NoAnswerCounter OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "No answer counter of the unit having serial address 1. " + ::= { unitNoAnswerCounterGroup 1 } + + -- ... You will have how many unitX-NoAnswerCounter objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.8 + unitErrorChecksumCounterGroup OBJECT IDENTIFIER ::= { webGateInfo 8 } + + -- 1.3.6.1.4.1.9839.2.0.8.1 + unit1-ErrorChecksumCounter OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Error checksum counter of the unit having serial address 1. " + ::= { unitErrorChecksumCounterGroup 1 } + + -- ... You will have how many unitX-ErrorChecksumCounter objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.0.9 + unitTimeoutCounterGroup OBJECT IDENTIFIER ::= { webGateInfo 9 } + + -- 1.3.6.1.4.1.9839.2.0.9.1 + unit1-TimeoutCounter OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Timeout counter of the unit having serial address 1. " + ::= { unitTimeoutCounterGroup 1 } + + -- ... You will have how many unitX-TimeoutCounter objects as the value of netSize is + + -- 1.3.6.1.4.1.9839.2.1 + -- ug40cdzMIB OBJECT IDENTIFIER ::= { instruments 1 } + + -- 1.3.6.1.4.1.9839.2.1.1 + digitalObjects OBJECT IDENTIFIER ::= { ug40cdzMIB 1 } + + -- 1.3.6.1.4.1.9839.2.1.1.1 + systemOn OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "System On (Fan)" + ::= { digitalObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.1.2 + compressore1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 1" + ::= { digitalObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.1.3 + compressore2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 2" + ::= { digitalObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.1.4 + compressore3 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 3" + ::= { digitalObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.1.5 + compressore4 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 4" + ::= { digitalObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.1.6 + heating1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating 1" + ::= { digitalObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.1.7 + heating2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating 2" + ::= { digitalObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.1.9 + hotGasCoil OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Hot Gas Coil" + ::= { digitalObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.1.10 + dehumidification OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dehumidification" + ::= { digitalObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.1.11 + humidification OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidification" + ::= { digitalObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.1.12 + emerg OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Main Power Loss" + ::= { digitalObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.1.20 + alarmAccess OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Tampering Alarm" + ::= { digitalObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.1.21 + alarmRoomHT OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room High Temperature" + ::= { digitalObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.1.22 + alarmRoomLT OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room Low Temperature" + ::= { digitalObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.1.23 + alarmRoomHH OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room High Humidity" + ::= { digitalObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.1.24 + alarmRoomLH OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room Low Humidity" + ::= { digitalObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.1.25 + alarmRoomEAP OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Room T+H Limits by External Sensors" + ::= { digitalObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.1.26 + alarmFilter OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Clogged Filter" + ::= { digitalObjects 26 } + + -- 1.3.6.1.4.1.9839.2.1.1.27 + alarmFlood OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Water Leakage Detected" + ::= { digitalObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.1.28 + alarmAirFlow OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Loss of Air Flow" + ::= { digitalObjects 28 } + + -- 1.3.6.1.4.1.9839.2.1.1.29 + alarmHeater OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Heater Overheating" + ::= { digitalObjects 29 } + + -- 1.3.6.1.4.1.9839.2.1.1.30 + alarmHP1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Circuit 1 High Pressure" + ::= { digitalObjects 30 } + + -- 1.3.6.1.4.1.9839.2.1.1.31 + alarmHP2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Circuit 1 High Pressure" + ::= { digitalObjects 31 } + + -- 1.3.6.1.4.1.9839.2.1.1.32 + alarmLP1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Circuit 1 Low Pressure" + ::= { digitalObjects 32 } + + -- 1.3.6.1.4.1.9839.2.1.1.33 + alarmLP2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Circuit 2 Low Pressure" + ::= { digitalObjects 33 } + + -- 1.3.6.1.4.1.9839.2.1.1.34 + alarmEXV1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Circuit 1 Electronic Valve Failure" + ::= { digitalObjects 34 } + + -- 1.3.6.1.4.1.9839.2.1.1.35 + alarmEXV2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Circuit 2 Electronic Valve Failure" + ::= { digitalObjects 35 } + + -- 1.3.6.1.4.1.9839.2.1.1.36 + alarmPSE OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Wrong Phase Sequence" + ::= { digitalObjects 36 } + + -- 1.3.6.1.4.1.9839.2.1.1.37 + alarmSmokeFire OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: SMOKE-FIRE DETECTED" + ::= { digitalObjects 37 } + + -- 1.3.6.1.4.1.9839.2.1.1.38 + alarmLAN OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Interrupted LAN Alarm" + ::= { digitalObjects 38 } + + -- 1.3.6.1.4.1.9839.2.1.1.39 + alarmHUHC OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Humidifier High Current" + ::= { digitalObjects 39 } + + -- 1.3.6.1.4.1.9839.2.1.1.40 + alarmHUPL OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Humidifier Power Loss" + ::= { digitalObjects 40 } + + -- 1.3.6.1.4.1.9839.2.1.1.41 + alarmHUWL OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Humidifier Water Loss" + ::= { digitalObjects 41 } + + -- 1.3.6.1.4.1.9839.2.1.1.42 + alarmCWDHT OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: CW Temperature too High for Dehumidification" + ::= { digitalObjects 42 } + + -- 1.3.6.1.4.1.9839.2.1.1.43 + alarmCWF OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: CW Valve Failure or Water Flow too Low" + ::= { digitalObjects 43 } + + -- 1.3.6.1.4.1.9839.2.1.1.44 + alarmCWFF OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Loss of Water Flow" + ::= { digitalObjects 44 } + + -- 1.3.6.1.4.1.9839.2.1.1.45 + alarmCWHT OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: High Chilled Water Temperature" + ::= { digitalObjects 45 } + + -- 1.3.6.1.4.1.9839.2.1.1.46 + alarmRTS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room Temp. Sensor Failed/Disconnected" + ::= { digitalObjects 46 } + + -- 1.3.6.1.4.1.9839.2.1.1.47 + alarmHWS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Hot Water Temp. Sensor Failed/Disconnected" + ::= { digitalObjects 47 } + + -- 1.3.6.1.4.1.9839.2.1.1.48 + alarmCWS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Chilled Water Temp. Sensor Failed/Disconnected" + ::= { digitalObjects 48 } + + -- 1.3.6.1.4.1.9839.2.1.1.49 + alarmOTS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Outdoor Temperature Sensor Failed/Disconnected" + ::= { digitalObjects 49 } + + -- 1.3.6.1.4.1.9839.2.1.1.50 + alarmDTS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Delivery Air Temp. Sensor Failed/Disconnected" + ::= { digitalObjects 50 } + + -- 1.3.6.1.4.1.9839.2.1.1.51 + alarmRHS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room Humidity Sensor Failed/Disconnected" + ::= { digitalObjects 51 } + + -- 1.3.6.1.4.1.9839.2.1.1.52 + alarmCWOTS OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Chilled Water Outlet T. Sensor Failed/Disconnected" + ::= { digitalObjects 52 } + + -- 1.3.6.1.4.1.9839.2.1.1.53 + alarmC1Hours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Compressor 1 hour counter threshold" + ::= { digitalObjects 53 } + + -- 1.3.6.1.4.1.9839.2.1.1.54 + alarmC2Hours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Compressor 2 hour counter threshold" + ::= { digitalObjects 54 } + + -- 1.3.6.1.4.1.9839.2.1.1.55 + alarmC3Hours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Compressor 3 hour counter threshold" + ::= { digitalObjects 55 } + + -- 1.3.6.1.4.1.9839.2.1.1.56 + alarmC4Hours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Compressor 4 hour counter threshold" + ::= { digitalObjects 56 } + + -- 1.3.6.1.4.1.9839.2.1.1.57 + alarmFilterHours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Air Filter hour counter threshold" + ::= { digitalObjects 57 } + + -- 1.3.6.1.4.1.9839.2.1.1.58 + alarmHeat1Hours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Heater 1 hour counter threshold" + ::= { digitalObjects 58 } + + -- 1.3.6.1.4.1.9839.2.1.1.59 + alarmHeat2Hours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Heater 1 hour counter threshold" + ::= { digitalObjects 59 } + + -- 1.3.6.1.4.1.9839.2.1.1.60 + alarmHumHours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Humidifier hour counter threshold" + ::= { digitalObjects 60 } + + -- 1.3.6.1.4.1.9839.2.1.1.61 + alarmUnitHours OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "ServiceAlarm: Unit hour counter threshold" + ::= { digitalObjects 61 } + + -- 1.3.6.1.4.1.9839.2.1.1.62 + alarmDI2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm by Digital Input 2" + ::= { digitalObjects 62 } + + -- 1.3.6.1.4.1.9839.2.1.1.63 + alarmDI4 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm by Digital Input 4" + ::= { digitalObjects 63 } + + -- 1.3.6.1.4.1.9839.2.1.1.64 + alarmDI6 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm by Digital Input 6" + ::= { digitalObjects 64 } + + -- 1.3.6.1.4.1.9839.2.1.1.65 + alarmHum OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier General Alarm" + ::= { digitalObjects 65 } + + -- 1.3.6.1.4.1.9839.2.1.1.66 + alarmGeneral OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "General Alarm" + ::= { digitalObjects 66 } + + -- 1.3.6.1.4.1.9839.2.1.1.67 + alarm2ndLevel OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Standby Unit Switchover Alarm" + ::= { digitalObjects 67 } + + -- 1.3.6.1.4.1.9839.2.1.1.68 + alarmA OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type A Alarm" + ::= { digitalObjects 68 } + + -- 1.3.6.1.4.1.9839.2.1.1.69 + alarmB OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type B Alarm" + ::= { digitalObjects 69 } + + -- 1.3.6.1.4.1.9839.2.1.1.70 + alarmC OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Type C Alarm" + ::= { digitalObjects 70 } + + -- 1.3.6.1.4.1.9839.2.1.1.71 + selDXCW OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "DX/CW Switch on TC Units" + ::= { digitalObjects 71 } + + -- 1.3.6.1.4.1.9839.2.1.1.72 + selSW OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Summer/Winter Switchover" + ::= { digitalObjects 72 } + + -- 1.3.6.1.4.1.9839.2.1.1.75 + systemOnOff OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "System On-Off" + ::= { digitalObjects 75 } + + -- 1.3.6.1.4.1.9839.2.1.1.76 + resetAlarm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Alarm Reset" + ::= { digitalObjects 76 } + + -- 1.3.6.1.4.1.9839.2.1.1.77 + resetHrsFilt OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Filter Run Hours Reset" + ::= { digitalObjects 77 } + + -- 1.3.6.1.4.1.9839.2.1.1.78 + resetHrC1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 1 Run Hours Reset" + ::= { digitalObjects 78 } + + -- 1.3.6.1.4.1.9839.2.1.1.79 + resetHrC2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 2 Run Hours Reset" + ::= { digitalObjects 79 } + + -- 1.3.6.1.4.1.9839.2.1.1.80 + resetHrC3 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 3 Run Hours Reset" + ::= { digitalObjects 80 } + + -- 1.3.6.1.4.1.9839.2.1.1.81 + resetHrC4 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 4 Run Hours Reset" + ::= { digitalObjects 81 } + + -- 1.3.6.1.4.1.9839.2.1.1.82 + resetStC1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 1 Starting Counter Reset " + ::= { digitalObjects 82 } + + -- 1.3.6.1.4.1.9839.2.1.1.83 + resetStC2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 2 Starting Counter Reset " + ::= { digitalObjects 83 } + + -- 1.3.6.1.4.1.9839.2.1.1.84 + resetStC3 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 3 Starting Counter Reset " + ::= { digitalObjects 84 } + + -- 1.3.6.1.4.1.9839.2.1.1.85 + resetStC4 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Compressor 4 Starting Counter Reset " + ::= { digitalObjects 85 } + + -- 1.3.6.1.4.1.9839.2.1.1.86 + resetHrH1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heater 1 Run Hours Reset" + ::= { digitalObjects 86 } + + + -- 1.3.6.1.4.1.9839.2.1.1.87 + resetHrH2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heater 2 Run Hours Reset" + ::= { digitalObjects 87 } + + -- 1.3.6.1.4.1.9839.2.1.1.88 + resetStH1 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heater 1 Starting Counter Reset" + ::= { digitalObjects 88 } + + -- 1.3.6.1.4.1.9839.2.1.1.89 + resetStH2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heater 2 Starting Counter Reset" + ::= { digitalObjects 89 } + + -- 1.3.6.1.4.1.9839.2.1.1.90 + resetHrHU OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidifier Run Hours Reset" + ::= { digitalObjects 90 } + + -- 1.3.6.1.4.1.9839.2.1.1.91 + resetStHU OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidifier Starting Counter Reset" + ::= { digitalObjects 91 } + + -- 1.3.6.1.4.1.9839.2.1.1.92 + resetHrACU OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Unit Run Hours Reset" + ::= { digitalObjects 92 } + + -- 1.3.6.1.4.1.9839.2.1.1.95 + sleepmode OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode (Sleep Mode)" + ::= { digitalObjects 95 } + + -- 1.3.6.1.4.1.9839.2.1.1.96 + smtest OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Sleep Mode Test" + ::= { digitalObjects 96 } + + -- 1.3.6.1.4.1.9839.2.1.1.97 + enablemeanT OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Local/Mean Usage of Values" + ::= { digitalObjects 97 } + + + -- 1.3.6.1.4.1.9839.2.1.2 + analogObjects OBJECT IDENTIFIER ::= { ug40cdzMIB 2 } + + -- 1.3.6.1.4.1.9839.2.1.2.1 + roomTemp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Room Temperature" + ::= { analogObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.2.2 + outdoorTemp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Ambient Temperature" + ::= { analogObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.2.3 + deliveryTemp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Delivery Air Temperature" + ::= { analogObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.2.4 + cwTemp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Chilled Water Temperature" + ::= { analogObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.2.5 + hwTemp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Hot Water Temperature" + ::= { analogObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.2.6 + roomRH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Room Relative Humidity" + ::= { analogObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.2.7 + cwoTemp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Chilled Water Outlet Temperature" + ::= { analogObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.2.8 + evapPress1 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "bar" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Circuit 1 Evaporating Pressure" + ::= { analogObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.2.9 + evapPress2 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "bar" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Circuit 2 Evaporating Pressure" + ::= { analogObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.2.10 + suctTemp1 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 1 Suction Temperature" + ::= { analogObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.2.11 + suctTemp2 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 2 Suction Temperature" + ::= { analogObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.2.12 + evapTemp1 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 1 Evap.Temperature" + ::= { analogObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.2.13 + evapTemp2 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 2 Evap.Temperature" + ::= { analogObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.2.14 + ssh1 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 1 Superheat" + ::= { analogObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.2.15 + ssh2 OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 2 Superheat" + ::= { analogObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.2.16 + coolRamp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "%" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Cooling Valve Ramp" + ::= { analogObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.2.17 + heatRamp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "%" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating Valve Ramp" + ::= { analogObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.2.18 + fanSpeed OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "%" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Evapor. Fan Speed" + ::= { analogObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.2.20 + coolSetP OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Cooling Set Point" + ::= { analogObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.2.21 + coolDiff OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Cooling Prop.Band" + ::= { analogObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.2.22 + cool2SetP OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Cooling 2nd Set Point" + ::= { analogObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.2.23 + heatSetP OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heating Set point" + ::= { analogObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.2.24 + heat2SetP OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heating 2nd Set point" + ::= { analogObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.2.25 + heatDiff OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heating Prop.Band" + ::= { analogObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.2.26 + thrsHT OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C x10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "High Room Temperature Alarm Threshold" + ::= { analogObjects 26 } + + -- 1.3.6.1.4.1.9839.2.1.2.27 + thrsLT OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C x10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Low Room Temperature Alarm Threshold" + ::= { analogObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.2.28 + smCoolSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Cooling Setpoint" + ::= { analogObjects 28 } + + -- 1.3.6.1.4.1.9839.2.1.2.29 + smHeatSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Heating Setpoint" + ::= { analogObjects 29 } + + -- 1.3.6.1.4.1.9839.2.1.2.30 + cwDehumSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW Setpoint to Start Dehumidification" + ::= { analogObjects 30 } + + -- 1.3.6.1.4.1.9839.2.1.2.31 + cwHtThrsh OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW High Temperature Alarm Threshold" + ::= { analogObjects 31 } + + -- 1.3.6.1.4.1.9839.2.1.2.32 + cwModeSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW Setpoint to start CW Operating Mode (Only TC Units)" + ::= { analogObjects 32 } + + -- 1.3.6.1.4.1.9839.2.1.2.33 + radcoolSpES OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Radcooler Setpoint in Energy Saving Mode" + ::= { analogObjects 33 } + + -- 1.3.6.1.4.1.9839.2.1.2.34 + radcoolSpDX OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Radcooler Setpoint in DX Mode" + ::= { analogObjects 34 } + + -- 1.3.6.1.4.1.9839.2.1.2.35 + delTempLimit OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C x10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Delivery Temperature Low Limit Setpoint" + ::= { analogObjects 35 } + + -- 1.3.6.1.4.1.9839.2.1.2.36 + dtAutChgMLT OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "degrees C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Delta Temperature for Automatic Mean/Local Changeover" + ::= { analogObjects 36 } + + + -- 1.3.6.1.4.1.9839.2.1.3 + integerObjects OBJECT IDENTIFIER ::= { ug40cdzMIB 3 } + + -- 1.3.6.1.4.1.9839.2.1.3.1 + filterWorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Air Filter Working Houres" + ::= { integerObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.3.2 + unitWorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unit Working Houres" + ::= { integerObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.3.3 + compr1WorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 1 Run Hours" + ::= { integerObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.3.4 + compr2WorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 2 Run Hours" + ::= { integerObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.3.5 + compr3WorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 3 Run Hours" + ::= { integerObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.3.6 + compr4WorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 4 Run Hours" + ::= { integerObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.3.7 + heat1WorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 1 Run Hours" + ::= { integerObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.3.8 + heat2WorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 2 Run Hours" + ::= { integerObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.3.9 + humiWorkH OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Run Hours" + ::= { integerObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.3.12 + dehumPband OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Dehumidification Prop.Band" + ::= { integerObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.3.13 + humidPband OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidification Prop.Band" + ::= { integerObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.3.14 + hhAlarmThrsh OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "High Humidity Alarm Threshold" + ::= { integerObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.3.15 + lhAlarmThrsh OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Low Humidity Alarm Threshold" + ::= { integerObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.3.16 + dehumSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Dehumidification Setpoint" + ::= { integerObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.3.17 + smDehumSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Dehumidification Setpoint" + ::= { integerObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.3.18 + humidSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidification Setpoint" + ::= { integerObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.3.19 + smHumidSetp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Humidification Setpoint" + ::= { integerObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.3.20 + pwOnDelay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Restart Delay" + ::= { integerObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.3.21 + regulDelay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Regulation Start Transitory" + ::= { integerObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.3.22 + lowPdelay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "s" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Low Pressure Delay" + ::= { integerObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.3.23 + thAlarmdelay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "min" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Temp./Humid.Limits Alarm Delay" + ::= { integerObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.3.24 + regExcTime OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "min" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Anti-Hunting Constant" + ::= { integerObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.3.25 + stdbyTime OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Stand-by Cycle Base Time" + ::= { integerObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.3.27 + lanUnit OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "n" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Number of LAN Units" + ::= { integerObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.3.28 + smCycleTime OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "min" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Sleep Mode Testing Cycle Time" + ::= { integerObjects 28 } + + -- 1.3.6.1.4.1.9839.2.1.3.29 + exv1steps OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "n" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 1 EXV Valve Position" + ::= { integerObjects 29 } + + -- 1.3.6.1.4.1.9839.2.1.3.30 + exv2steps OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "n" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Circuit 2 EXV Valve Position" + ::= { integerObjects 30 } + + + + END + +-- +-- CAREL-ug40cdz.MIB +-- diff --git a/mibs/UNCDZ-MIB b/mibs/UNCDZ-MIB new file mode 100644 index 000000000..95e7a22a4 --- /dev/null +++ b/mibs/UNCDZ-MIB @@ -0,0 +1,1147 @@ +-- +-- UNCDZ.MIB +-- MIB generated by CAREL +-- Thursday, 12 August 2004 +-- + + UNCDZ-MIB DEFINITIONS ::= BEGIN + + IMPORTS + OBJECT-GROUP + FROM SNMPv2-CONF + sysContact, sysName, sysLocation + FROM SNMPv2-MIB + enterprises, MODULE-IDENTITY, OBJECT-TYPE, Integer32 + FROM SNMPv2-SMI; + + uncdz-MIB MODULE-IDENTITY + LAST-UPDATED "200408121552Z" -- August 12, 2004 at 15:52 GMT + ORGANIZATION "CAREL SpA" + CONTACT-INFO + " + Simone Ravazzolo + Carel SpA + Via dell'Industria, 11 + 35020 Brugine (PD) Italy + Tel: +39 049 9716611 + E-mail: simone.ravazzolo@carel.com + " + DESCRIPTION + "This is the MIB module for the UNIFLAIR UNCDZ device." + REVISION "200408121552Z" -- August 12, 2004 at 15:52 GMT + DESCRIPTION + "This is the original version of the MIB." + ::= { instruments 1 } + + +-- +-- Node definitions +-- + + -- 1.3.6.1.4.1.9839 + carel OBJECT IDENTIFIER ::= { enterprises 9839 } + + -- 1.3.6.1.4.1.9839.1 + systm OBJECT IDENTIFIER ::= { carel 1 } + + -- 1.3.6.1.4.1.9839.1.1 + agentRelease OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Release of the Agent." + ::= { systm 1 } + + -- 1.3.6.1.4.1.9839.1.2 + agentCode OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Code of the Agent. 2=pCOWeb." + ::= { systm 2 } + + -- 1.3.6.1.4.1.9839.2 + instruments OBJECT IDENTIFIER ::= { carel 2 } + + -- 1.3.6.1.4.1.9839.2.0 + pCOWebInfo OBJECT IDENTIFIER ::= { instruments 0 } + + + -- 1.3.6.1.4.1.9839.2.0.10 + pCOStatusgroup OBJECT IDENTIFIER ::= { pCOWebInfo 10 } + + -- 1.3.6.1.4.1.9839.2.0.10.1 + pCOId1-Status OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Status of pCOId1. 0=Offline, 1=Init, 2=Online" + ::= { pCOStatusgroup 1 } + + -- ... You will have how many pCOIdX-Status objects as the pCOs connected to pCOWeb. + + -- 1.3.6.1.4.1.9839.2.0.11 + pCOErrorsNumbergroup OBJECT IDENTIFIER ::= { pCOWebInfo 11 } + + -- 1.3.6.1.4.1.9839.2.0.11.1 + pCOId1-ErrorsNumber OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Number of Communication Errors from pCOId1 to pCOWeb." + ::= { pCOErrorsNumbergroup 1 } + + -- ... You will have how many pCOIdX-ErrorsNumber objects as the pCOs connected to pCOWeb. + + -- 1.3.6.1.4.1.9839.2.1.1 + digitalObjects OBJECT IDENTIFIER ::= { uncdz-MIB 1 } + + -- 1.3.6.1.4.1.9839.2.1.1.1 + vent-on OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "System On (Fan)" + ::= { digitalObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.1.2 + compressore1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 1" + ::= { digitalObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.1.3 + compressore2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 2" + ::= { digitalObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.1.4 + compressore3 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 3" + ::= { digitalObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.1.5 + compressore4 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 4" + ::= { digitalObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.1.6 + out-h1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating 1" + ::= { digitalObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.1.7 + out-h2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating 2" + ::= { digitalObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.1.8 + out-h3 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heating 3" + ::= { digitalObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.1.9 + gas-caldo-on OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Hot Gas Coil" + ::= { digitalObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.1.10 + on-deum OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Dehumidification" + ::= { digitalObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.1.11 + power OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidification" + ::= { digitalObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.1.12 + mal-access OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Tampering Alarm" + ::= { digitalObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.1.13 + mal-ata OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room High Temperature" + ::= { digitalObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.1.14 + mal-bta OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room Low Temperature" + ::= { digitalObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.1.15 + mal-aua OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room High Humidity" + ::= { digitalObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.1.16 + mal-bua OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room Low Humidity" + ::= { digitalObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.1.17 + mal-eap OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room High/Low Temp./Humid.(Ext. Devices)" + ::= { digitalObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.1.18 + mal-filter OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Clogged Filter" + ::= { digitalObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.1.19 + mal-flood OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Water Leakage Detected" + ::= { digitalObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.1.20 + mal-flux OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Loss of Air Flow" + ::= { digitalObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.1.21 + mal-heater OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Heater Overheating" + ::= { digitalObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.1.22 + mal-hp1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: High Pressure 1" + ::= { digitalObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.1.23 + mal-hp2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: High Pressure 2" + ::= { digitalObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.1.24 + mal-lp1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Low Pressure 1" + ::= { digitalObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.1.25 + mal-lp2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Low Pressure 2" + ::= { digitalObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.1.26 + mal-phase OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Wrong phase sequence" + ::= { digitalObjects 26 } + + -- 1.3.6.1.4.1.9839.2.1.1.27 + mal-smoke OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: SMOKE-FIRE DETECTED" + ::= { digitalObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.1.28 + mal-lan OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Interrupted LAN" + ::= { digitalObjects 28 } + + -- 1.3.6.1.4.1.9839.2.1.1.29 + mal-hcurr OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Alarm: High Current" + ::= { digitalObjects 29 } + + -- 1.3.6.1.4.1.9839.2.1.1.30 + mal-nopower OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Alarm: Power Loss" + ::= { digitalObjects 30 } + + -- 1.3.6.1.4.1.9839.2.1.1.31 + mal-nowater OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Alarm: Water Loss" + ::= { digitalObjects 31 } + + -- 1.3.6.1.4.1.9839.2.1.1.32 + mal-cw-dh OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Chilled Water Temp. too High for Dehumidification" + ::= { digitalObjects 32 } + + -- 1.3.6.1.4.1.9839.2.1.1.33 + mal-tc-cw OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: CW Valve Failure or Water Flow too Low" + ::= { digitalObjects 33 } + + -- 1.3.6.1.4.1.9839.2.1.1.34 + mal-wflow OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Loss of Water flow" + ::= { digitalObjects 34 } + + -- 1.3.6.1.4.1.9839.2.1.1.35 + mal-wht OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: High chilled water temp." + ::= { digitalObjects 35 } + + -- 1.3.6.1.4.1.9839.2.1.1.36 + mal-sonda-ta OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Room air Sensor Failure/Disconnected" + ::= { digitalObjects 36 } + + -- 1.3.6.1.4.1.9839.2.1.1.37 + mal-sonda-tac OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Hot water Sensor Failure/Disconnected" + ::= { digitalObjects 37 } + + -- 1.3.6.1.4.1.9839.2.1.1.38 + mal-sonda-tc OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Condensing water Sensor Failure/Disconnect." + ::= { digitalObjects 38 } + + -- 1.3.6.1.4.1.9839.2.1.1.39 + mal-sonda-te OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Outdoor temp. Sensor Failure/Disconnected" + ::= { digitalObjects 39 } + + -- 1.3.6.1.4.1.9839.2.1.1.40 + mal-sonda-tm OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Delivery temp. Sensor Failure/Disconnected" + ::= { digitalObjects 40 } + + -- 1.3.6.1.4.1.9839.2.1.1.41 + mal-sonda-ua OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Alarm: Rel. Humidity Sensor Failure/Disconnected" + ::= { digitalObjects 41 } + + -- 1.3.6.1.4.1.9839.2.1.1.42 + mal-ore-compr1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Compressor 1 hour counter threshold" + ::= { digitalObjects 42 } + + -- 1.3.6.1.4.1.9839.2.1.1.43 + mal-ore-compr2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Compressor 2 hour counter threshold" + ::= { digitalObjects 43 } + + -- 1.3.6.1.4.1.9839.2.1.1.44 + mal-ore-compr3 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Compressor 3 hour counter threshold" + ::= { digitalObjects 44 } + + -- 1.3.6.1.4.1.9839.2.1.1.45 + mal-ore-compr4 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Compressor 4 hour counter threshold" + ::= { digitalObjects 45 } + + -- 1.3.6.1.4.1.9839.2.1.1.46 + mal-ore-filtro OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Air Filter hour counter threshold" + ::= { digitalObjects 46 } + + -- 1.3.6.1.4.1.9839.2.1.1.47 + mal-ore-risc1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Heater 1 hour counter threshold" + ::= { digitalObjects 47 } + + -- 1.3.6.1.4.1.9839.2.1.1.48 + mal-ore-risc2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Heater 2 hour counter threshold" + ::= { digitalObjects 48 } + + -- 1.3.6.1.4.1.9839.2.1.1.49 + mal-ore-umid OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Humidifier hour counter threshold" + ::= { digitalObjects 49 } + + -- 1.3.6.1.4.1.9839.2.1.1.50 + mal-ore-unit OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Service Alarm: Unit hour counter threshold" + ::= { digitalObjects 50 } + + -- 1.3.6.1.4.1.9839.2.1.1.51 + glb-al OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "General Alarm" + ::= { digitalObjects 51 } + + -- 1.3.6.1.4.1.9839.2.1.1.52 + or-al-2lev OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "2nd Level Alarm" + ::= { digitalObjects 52 } + + -- 1.3.6.1.4.1.9839.2.1.1.53 + range-t-ext OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Outdoor Temp. Sensor Fitted" + ::= { digitalObjects 53 } + + -- 1.3.6.1.4.1.9839.2.1.1.54 + range-t-circ OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Closed Circuit (or Chilled) Water Temperature Sensor Fitted" + ::= { digitalObjects 54 } + + -- 1.3.6.1.4.1.9839.2.1.1.55 + range-t-man OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Delivery Temp. Sensor Fitted" + ::= { digitalObjects 55 } + + -- 1.3.6.1.4.1.9839.2.1.1.56 + range-t-ac OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Hot water temp. Sensor Fitted" + ::= { digitalObjects 56 } + + -- 1.3.6.1.4.1.9839.2.1.1.57 + umid-al OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier general alarm" + ::= { digitalObjects 57 } + + -- 1.3.6.1.4.1.9839.2.1.1.58 + range-u-amb OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Relative Humidity Sensor Fitted" + ::= { digitalObjects 58 } + + -- 1.3.6.1.4.1.9839.2.1.1.60 + k-syson OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Unit Remote Switch-On/Off Control" + ::= { digitalObjects 60 } + + -- 1.3.6.1.4.1.9839.2.1.1.61 + xs-res-al OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Buzzer and Alarm Remote Reset Control" + ::= { digitalObjects 61 } + + -- 1.3.6.1.4.1.9839.2.1.1.63 + sleep-mode OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set Back Mode (Sleep Mode)" + ::= { digitalObjects 63 } + + -- 1.3.6.1.4.1.9839.2.1.1.64 + test-sm OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set Back mode: Cyclical Start of Fan" + ::= { digitalObjects 64 } + + -- 1.3.6.1.4.1.9839.2.1.1.65 + ab-mediath OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Usage of T+ H Values: Local (0) / Mean (1)" + ::= { digitalObjects 65 } + + -- 1.3.6.1.4.1.9839.2.1.1.66 + ustdby1-2 OBJECT-TYPE + SYNTAX Integer32 (0..1) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "No. Of Stand-by Units: one (0) / two (1)" + ::= { digitalObjects 66 } + + -- 1.3.6.1.4.1.9839.2.1.1.67 + emerg OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unit in Emergency operation" + ::= { digitalObjects 67 } + + + -- 1.3.6.1.4.1.9839.2.1.2 + analogObjects OBJECT IDENTIFIER ::= { uncdz-MIB 2 } + + -- 1.3.6.1.4.1.9839.2.1.2.1 + temp-amb OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Room Temperature" + ::= { analogObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.2.2 + temp-ext OBJECT-TYPE + SYNTAX Integer32 + UNITS "deg.C x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Outdoor Temperature" + ::= { analogObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.2.3 + temp-mand OBJECT-TYPE + SYNTAX Integer32 + UNITS "deg.C x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Delivery Air Temperature" + ::= { analogObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.2.4 + temp-circ OBJECT-TYPE + SYNTAX Integer32 + UNITS "deg.C x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Closed Circuit (or Chilled) Water Temperature" + ::= { analogObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.2.5 + temp-ac OBJECT-TYPE + SYNTAX Integer32 + UNITS "deg.C x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Hot Water Temperature" + ::= { analogObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.2.6 + umid-amb OBJECT-TYPE + SYNTAX Integer32 + UNITS "rH% x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Room Relative Humidity" + ::= { analogObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.2.7 + t-set OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C x 10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Cooling Set Point" + ::= { analogObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.2.8 + t-diff OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C x 10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Cooling Prop.Band" + ::= { analogObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.2.9 + t-set-c OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C x 10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heating Set point" + ::= { analogObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.2.10 + t-diff-c OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C x 10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Heating Prop.Band" + ::= { analogObjects 10 } + + -- 1.3.6.1.4.1.9839.2.1.2.11 + ht-set OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Room High Temp. Alarm Threshold" + ::= { analogObjects 11 } + + -- 1.3.6.1.4.1.9839.2.1.2.12 + lt-set OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Room Low Temp. Alarm Threshold" + ::= { analogObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.2.13 + t-set-sm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Cooling Set Point" + ::= { analogObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.2.14 + t-set-c-sm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Heating Set Point" + ::= { analogObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.2.15 + t-cw-dh OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW Set Point to Start Dehumidification Cycle" + ::= { analogObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.2.16 + htset-cw OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW High Temperature Alarm Threshold" + ::= { analogObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.2.17 + t-set-cw OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "CW Set Point to Start CW Operating Mode (TC only)" + ::= { analogObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.2.18 + t-rc-es OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Rad-cooler Set Point in E.S. Mode (ES Only)" + ::= { analogObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.2.19 + t-rc-est OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "N/A" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Rad-cooler Set Point in DX Mode (ES Only)" + ::= { analogObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.2.20 + rampa-valv OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0-10V Ramp 1 Value (CW Valve Ramp)" + ::= { analogObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.2.21 + anaout2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "N/A" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp)" + ::= { analogObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.2.22 + steam-production OBJECT-TYPE + SYNTAX Integer32 + UNITS "kg/h x 10" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier: steam capacity" + ::= { analogObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.2.23 + t-set-lm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Delivery Air Temperature Limit Set Point " + ::= { analogObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.2.24 + delta-lm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "deg.C x 10" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "T+H Values: Mean/Local Diff. (aut. Changeover)" + ::= { analogObjects 24 } + + + + + -- 1.3.6.1.4.1.9839.2.1.3 + integerObjects OBJECT IDENTIFIER ::= { uncdz-MIB 3 } + + -- 1.3.6.1.4.1.9839.2.1.3.1 + ore-filtro OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Air Filter Working Houres" + ::= { integerObjects 1 } + + -- 1.3.6.1.4.1.9839.2.1.3.2 + ore-unit OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Unit Working Houres" + ::= { integerObjects 2 } + + -- 1.3.6.1.4.1.9839.2.1.3.3 + ore-compr1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 1 Working Houres" + ::= { integerObjects 3 } + + -- 1.3.6.1.4.1.9839.2.1.3.4 + ore-compr2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 2 Working Houres" + ::= { integerObjects 4 } + + -- 1.3.6.1.4.1.9839.2.1.3.5 + ore-compr3 OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 3 Working Houres" + ::= { integerObjects 5 } + + -- 1.3.6.1.4.1.9839.2.1.3.6 + ore-compr4 OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Compressor 4 Working Houres" + ::= { integerObjects 6 } + + -- 1.3.6.1.4.1.9839.2.1.3.7 + ore-heat1 OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 1 Working Houres" + ::= { integerObjects 7 } + + -- 1.3.6.1.4.1.9839.2.1.3.8 + ore-heat2 OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Heater 2 Working Houres" + ::= { integerObjects 8 } + + -- 1.3.6.1.4.1.9839.2.1.3.9 + ore-umid OBJECT-TYPE + SYNTAX Integer32 + UNITS "h" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "Humidifier Working Houres" + ::= { integerObjects 9 } + + -- 1.3.6.1.4.1.9839.2.1.3.12 + hdiff OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Dehumidification Proportional Band" + ::= { integerObjects 12 } + + -- 1.3.6.1.4.1.9839.2.1.3.13 + hu-diff OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidification Proportional Band" + ::= { integerObjects 13 } + + -- 1.3.6.1.4.1.9839.2.1.3.14 + hh-set OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "High Relative Humidity Alarm Threshold" + ::= { integerObjects 14 } + + -- 1.3.6.1.4.1.9839.2.1.3.15 + lh-set OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Low Relative Humidity Alarm Threshold" + ::= { integerObjects 15 } + + -- 1.3.6.1.4.1.9839.2.1.3.16 + hset OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Dehumidification Set Point" + ::= { integerObjects 16 } + + -- 1.3.6.1.4.1.9839.2.1.3.17 + hset-sm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Dehumidification Set Point" + ::= { integerObjects 17 } + + -- 1.3.6.1.4.1.9839.2.1.3.18 + hu-set OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Humidification Set Point" + ::= { integerObjects 18 } + + -- 1.3.6.1.4.1.9839.2.1.3.19 + hu-set-sm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "rH%" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setback Mode: Humidification Set Point" + ::= { integerObjects 19 } + + -- 1.3.6.1.4.1.9839.2.1.3.20 + restart-delay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Restart Delay" + ::= { integerObjects 20 } + + -- 1.3.6.1.4.1.9839.2.1.3.21 + regul-delay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Regulation Start Transitory " + ::= { integerObjects 21 } + + -- 1.3.6.1.4.1.9839.2.1.3.22 + time-lowp OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Low Pressure Delay" + ::= { integerObjects 22 } + + -- 1.3.6.1.4.1.9839.2.1.3.23 + alarm-delay OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "m" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Room T+H Alarm Delay" + ::= { integerObjects 23 } + + -- 1.3.6.1.4.1.9839.2.1.3.24 + exc-time OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "m" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Anti-Hunting Constant of Room Regulation " + ::= { integerObjects 24 } + + -- 1.3.6.1.4.1.9839.2.1.3.25 + t-std-by OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "h" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Stand-by Cycle Base Time" + ::= { integerObjects 25 } + + -- 1.3.6.1.4.1.9839.2.1.3.27 + lan-unit OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "n" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Total of units connected in LAN" + ::= { integerObjects 27 } + + -- 1.3.6.1.4.1.9839.2.1.3.28 + ciclo-sm OBJECT-TYPE + SYNTAX Integer32 (-32767..32767) + UNITS "m" + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Set Back Mode: Fan Cyclical Start Interval" + ::= { integerObjects 28 } + + + + + + END + +-- +-- UNCDZ.MIB +--