Maximilian Wilhelm
2c9df26bbf
Update discovery and poller to allow stable interface mapping by ifName/ifDescr based port mapping.
...
By default libreNMS used the ifIndex to associate ports just found via SNMP
with ports discoverd/polled before and stored in the database. On Linux boxes
this is a problem as ifIndexes are rather likely to be unstable between reboots
or (re)configuration of tunnel interfaces (think: GRE/OpenVPN/Tinc/...), bridges,
Vlan interfaces, Bonding interfaces, etc.
This patch adds a »port association mode« configuration option per device which
allows to map discovered and known ports by their ifIndex, ifName, ifDescr, or
maybe other means in the future.
The default port association mode still is ifIndex for compatibility reasons.
As port RRD files were stored by their ifIndex before, they are now identified
by their unique and stable port_id to ensure a stable and unique mapping and
allow future port association modes to be added without requireing any further
internal changes. Existing RRD files are renamend accordingly in discovery and
poller tools to ensure stability of port associations in both modules as we
don't know which might run first after an update.
Signed-off-by: Maximilian Wilhelm <max@rfc2324.org >
2016-01-26 13:49:30 +01:00
laf
302ecb8858
Removed unused code in port poller for non-cisco devices
2016-01-19 11:25:03 +00:00
laf
0f33f6d1fa
Rebased
2016-01-04 12:09:32 +00:00
Paul Gear
8aecf71910
Merge pull request #2552 from SaaldjorMike/bcast-mcast-ciscosb
...
Ignore HC Broadcast and Multicast Counters for Cisco SB as they're al…
2016-01-02 07:01:18 +10:00
laf
32f5980523
Some more tweaks
2015-12-23 15:12:42 +00:00
laf
8b63bfad30
Updated again
2015-12-23 11:40:17 +00:00
laf
0e33048339
Updated influx port data
2015-12-23 11:28:40 +00:00
laf
904a24d7ed
Added some more tags for ports
2015-12-23 11:17:00 +00:00
Neil Lathwood
1ced3dff98
Merge pull request #2558 from vizay/brocade-vdx-support
...
Added full discovery and polling support for brocade VDX devices.
2015-12-18 15:57:27 +00:00
Neil Lathwood
73f09f129a
Merge pull request #2542 from ekoyle/add_stats_to_db
...
Add stats to db
2015-12-10 21:15:20 +00:00
Eldon Koyle
bd23d9e56a
This isn't the operator you are looking for. Move along.
2015-12-09 15:28:13 -07:00
Eldon Koyle
81d84e0f8b
Always add 'extended' metrics to db and remove option
2015-12-08 09:54:31 -07:00
Daniel Preussker
a2d97f4283
Merge pull request #2458 from laf/rrdtune
...
Fix for crazy traffic values seen in graphs
2015-12-08 16:12:22 +00:00
vizay
c39c46aa18
Removed starting parenthesis causing syntax error
2015-12-06 10:53:43 +01:00
vizay
59b4ef7712
Added discovery and polling support for brocade VDX devices. Removed an obsolete value and check for ifAlias (in definitions and ports) since VDX nowdays report correct from ifAlias. Removed printing of interface numbers for vdx devices in the interface list since VDX devices do not report the expected ifIndex value like other switches do
2015-12-04 15:35:02 +01:00
Mike Rostermund
9b62235f25
Ignore HC Broadcast and Multicast Counters for Cisco SB as they're always 0
2015-12-03 22:00:39 +01:00
Eldon Koyle
1ee481ff6e
Rename option to extended_port_metrics
2015-12-03 09:40:30 -07:00
Eldon Koyle
fcaf3d49ab
Fix reference to non-existent variable
...
Use $port_id since $ports[$ifIndex]['port_id'] doesn't exist yet
2015-12-03 09:38:16 -07:00
Eldon Koyle
3f689045d9
Remove a couple of stray OIDs
2015-12-03 09:38:16 -07:00
Eldon Koyle
55c05c7866
Allow users to keep more statistics in the db
...
* Add $config['enable_extended_port_metrics'] to enable feature
* Add a new table to store stuff in
* Update data from the poller
2015-12-03 09:38:16 -07:00
laf
8460adc756
eth0 on AirFibre units get data from another MIB
2015-12-02 23:23:31 +00:00
laf
46b2fd7d1f
Removed debug
2015-11-18 21:54:07 +00:00
laf
52e0be911b
More updates
2015-11-17 05:38:45 -08:00
laf
253b27d403
More updates to tune rrdfiles
2015-11-17 05:14:41 -08:00
laf
84863586b5
rrdtune code
2015-11-17 02:20:23 -08:00
laf
7b14aada4e
Rebased
2015-10-26 11:08:19 +00:00
f0o
495b4b24fa
Fixes #2098
2015-10-10 13:34:51 +00:00
Neil Lathwood
e2dfab4ca0
Merge pull request #2007 from QuxLabs/qux-issue-8
...
Added working memcached support
2015-10-01 17:08:03 +01:00
f0o
7d95e94954
Fix rrd creation parameters
2015-09-28 08:24:57 +00:00
Daniel Preussker
7832868dd6
Added generic memcached support to dbFacile.*
...
Remove now obsolete memcached code in:
html/ajax_rulesuggest.php
Remove all the broken memcached code in:
html/pages/device/health/mempool.inc.php
html/pages/device/overview/generic/sensor.inc.php
html/pages/device/overview/mempools.inc.php
html/pages/device/port.inc.php
html/pages/device/ports.inc.php
html/pages/health/sensors.inc.php
includes/polling/functions.inc.php
includes/polling/mempools.inc.php
includes/polling/ports.inc.php
includes/polling/storage.inc.php
2015-09-27 19:33:17 +00:00
Daniel Preussker
ba7bf5f60b
Merge pull request #1715 from laf/rrdoptions
...
Updated rrdtool_update() to use new array format
2015-09-22 12:15:59 +00:00
laf
e4fd45037c
Final update for overwriting ifAlias
2015-08-30 14:34:37 -07:00
Paul Gear
c25dc9ccdb
Merge pull request #1750 from laf/issue-1729
...
Also use ifHighSpeed if ifSpeed is 0 and ifHighSpeed exists
2015-08-24 07:50:55 +10:00
laf
0baa0d81e2
Reworked if check
2015-08-23 21:39:37 +00:00
laf
a413968eb8
Also use ifHighSpeed if ifSpeed is 0 and ifHighSpeed exists
2015-08-23 20:06:28 +00:00
laf
8d929bc43c
Moved the snmp query for poe outside of the loop
2015-08-23 17:04:20 +00:00
laf
1d9fc71c71
Revert change which skips over ports that are down / admin down
2015-08-23 09:40:55 +00:00
laf
d0e803340e
More updates
2015-08-21 21:02:05 +00:00
Mark Schouten
55a2e0423d
Remove all unneeded if($debug)-statements and replace them with d_echo
2015-08-21 16:10:00 +02:00
laf
433562d351
More updates for influx
2015-08-19 20:58:02 +00:00
laf
987634e463
Updated rrdtool_update() to use new array format
2015-08-18 16:26:55 +00:00
Gerben Meijer
7817890b80
Fix parenthesis typo
2015-08-07 17:11:12 +02:00
Gerben Meijer
5467756328
Generalise mapping ifDescr to ifAlias
...
This allows both per OS enforcing of ifDescr = ifAlias as well as populating
when ifAlias = '' or NULL
2015-08-07 17:07:26 +02:00
Gerben Meijer
2dd8fe0553
Reorder ifalias_null check to prevent var flapping
...
This needs to run before IF-MIB data update, and needs to check and set
$this_port['ifAlias'] only as to not break the $data_oids loop.
2015-08-07 16:41:33 +02:00
Gerben Meijer
5e68b2e6e1
Also update $this_port for port descr parsing
2015-08-06 17:57:53 +02:00
Gerben Meijer
f016c84981
Properly reference ifalias_null config flag
...
Fixes an issue introduced in 9908eb2e37
2015-08-06 16:51:02 +02:00
laf
17dac9e755
Removed old alerting system code
2015-08-01 15:54:15 +00:00
laf
a41bcf29da
Added config option to rewrite ifAlias
2015-07-19 17:35:11 +01:00
laf
827b0346a6
ifAlias is now derived from ifDescr if NULL
2015-07-19 17:27:12 +01:00
Job Snijders
d8693f05ae
Fix coding style part 2
2015-07-15 11:04:22 +02:00
Maximilian Wilhelm