<?php
$id = $device['device_id'];
$hostname = $device['hostname'];
$community = $device['community'];
$snmpver = $device['snmpver'];
$port = $device['port'];

$valid_volt = array();

echo("Voltages : ");

## LMSensors Voltages
if ($device['os'] == "linux") 
{
  $oids = snmp_walk($device, "lmVoltSensorsDevice", "-OsqnU", "LM-SENSORS-MIB");
  if ($debug) { echo($oids."\n"); }
  if ($oids) echo("LM-SENSORS ");
  $precision = 1000;
  $type = "lmsensors";
  foreach(explode("\n", $oids) as $data) 
  {
    $data = trim($data);
    if ($data) 
    {
      list($oid,$descr) = explode(" ", $data,2);
      $split_oid = explode('.',$oid);
      $index = $split_oid[count($split_oid)-1];
      $oid  = "1.3.6.1.4.1.2021.13.16.4.1.3." . $index;
      $current = snmp_get($device, $oid, "-Oqv", "LM-SENSORS-MIB") / $precision;
      discover_volt($valid_volt,$device, $oid, $index, $type, $descr, $precision, NULL, NULL, $current);
    }
  }
}

## Areca Voltages
if ($device['os'] == "areca") 
{
  $oids = snmp_walk($device, "1.3.6.1.4.1.18928.1.2.2.1.8.1.2", "-OsqnU", "");
  if ($debug) { echo($oids."\n"); }
  if ($oids) echo("Areca ");
  $precision = 1000;
  $type = "areca";
  foreach(explode("\n", $oids) as $data) 
  {
    $data = trim($data);
    if ($data) 
    {
      list($oid,$descr) = explode(" ", $data,2);
      $split_oid = explode('.',$oid);
      $index = $split_oid[count($split_oid)-1];
      $oid  = "1.3.6.1.4.1.18928.1.2.2.1.8.1.3." . $index;
      $current = snmp_get($device, $oid, "-Oqv", "") / $precision;
      if ($descr != '"Battery Status"' || $current != 0.255) # FIXME not sure if this is supposed to be a voltage, but without BBU it's 225, then ignore.
      {
        discover_volt($valid_volt,$device, $oid, $index, $type, trim($descr,'"'), $precision, NULL, NULL, $current);
      }
    }
  }
}

## APC Voltages
if ($device['os'] == "apc") 
{
  $oids = snmp_walk($device, "1.3.6.1.4.1.318.1.1.8.5.3.3.1.3", "-OsqnU", "");
  if ($debug) { echo($oids."\n"); }
  if ($oids) echo("APC In ");
  $precision = 1;
  $type = "apc";
  foreach(explode("\n", $oids) as $data) 
  {
    $data = trim($data);
    if ($data) 
    {
      list($oid,$current) = explode(" ", $data,2);
      $split_oid = explode('.',$oid);
      $index = $split_oid[count($split_oid)-3];
      $oid  = "1.3.6.1.4.1.318.1.1.8.5.3.3.1.3." . $index . ".1.1";
      $descr = "Input Feed " . chr(64+$index);
      discover_volt($valid_volt,$device, $oid, "3.3.1.3.$index", $type, $descr, $precision, NULL, NULL, $current);
    }
  }

  $oids = snmp_walk($device, "1.3.6.1.4.1.318.1.1.8.5.4.3.1.3", "-OsqnU", "");
  if ($debug) { echo($oids."\n"); }
  if ($oids) echo(" APC Out ");
  $precision = 1;
  $type = "apc";
  foreach(explode("\n", $oids) as $data) 
  {
    $data = trim($data);
    if ($data) 
    {
      list($oid,$current) = explode(" ", $data,2);
      $split_oid = explode('.',$oid);
      $index = $split_oid[count($split_oid)-3];
      $oid  = "1.3.6.1.4.1.318.1.1.8.5.4.3.1.3." . $index . ".1.1";
      $descr = "Output Feed"; if (count(explode("\n", $oids)) > 1) { $descr .= " $index"; }
      discover_volt($valid_volt,$device, $oid, "4.3.1.3.$index", $type, $descr, $precision, NULL, NULL, $current);
    }
  }
}

## Supermicro Voltages
if ($device['os'] == "linux") 
{
  $oids = snmp_walk($device, "1.3.6.1.4.1.10876.2.1.1.1.1.3", "-OsqnU", "SUPERMICRO-HEALTH-MIB");
  if ($debug) { echo($oids."\n"); }
  $oids = trim($oids);
  if ($oids) echo("Supermicro ");
  $type = "supermicro";
  $precision = "1000";
  foreach(explode("\n", $oids) as $data) 
  {
    $data = trim($data);
    if ($data) 
    {
      list($oid,$kind) = explode(" ", $data);
      $split_oid = explode('.',$oid);
      $index = $split_oid[count($split_oid)-1];
      if ($kind == 1)
      {
        $volt_oid     = "1.3.6.1.4.1.10876.2.1.1.1.1.4.".$index;
        $descr_oid    = "1.3.6.1.4.1.10876.2.1.1.1.1.2.".$index;
        $monitor_oid  = "1.3.6.1.4.1.10876.2.1.1.1.1.10.".$index;
        $limit_oid    = "1.3.6.1.4.1.10876.2.1.1.1.1.5.".$index;
        $lowlimit_oid = "1.3.6.1.4.1.10876.2.1.1.1.1.6.".$index;

        $descr    = snmp_get($device, $descr_oid, "-Oqv", "SUPERMICRO-HEALTH-MIB");
        $current  = snmp_get($device, $volt_oid, "-Oqv", "SUPERMICRO-HEALTH-MIB") / $precision;
        $limit    = snmp_get($device, $limit_oid, "-Oqv", "SUPERMICRO-HEALTH-MIB") / $precision;
	$lowlimit = snmp_get($device, $lowlimit_oid, "-Oqv", "SUPERMICRO-HEALTH-MIB") / $precision;
        $monitor  = snmp_get($device, $monitor_oid, "-Oqv", "SUPERMICRO-HEALTH-MIB");
        $descr    = trim(str_ireplace("Voltage", "", $descr));

        if ($monitor == 'true')
        {
          echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, $lowlimit, $limit, $current);
        }
      }
    }
  }
}

## MGE UPS Voltages
if ($device['os'] == "mgeups") 
{
  echo("MGE ");
  $oids = trim(snmp_walk($device, "1.3.6.1.4.1.705.1.7.1", "-OsqnU"));
  if ($debug) { echo($oids."\n"); }
  list($unused,$numPhase) = explode(' ',$oids);
  for($i = 1; $i <= $numPhase;$i++)
  {
    $volt_oid   = ".1.3.6.1.4.1.705.1.7.2.1.2.$i";
    $descr      = "Output"; if ($numPhase > 1) $descr .= " Phase $i";
    $current    = snmp_get($device, $volt_oid, "-Oqv");
    if (!$current) 
    {
      $volt_oid .= ".0";
      $current    = snmp_get($device, $volt_oid, "-Oqv");
    }
    $current   /= 10;
    $type       = "mge-ups";
    $precision  = 10;
    $index      = $i;
    echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, $lowlimit, $limit, $current);
  }
  $oids = trim(snmp_walk($device, "1.3.6.1.4.1.705.1.6.1", "-OsqnU"));
  if ($debug) { echo($oids."\n"); }
  list($unused,$numPhase) = explode(' ',$oids);
  for($i = 1; $i <= $numPhase;$i++)
  {
    $volt_oid   = ".1.3.6.1.4.1.705.1.6.2.1.2.$i";
    $descr      = "Input"; if ($numPhase > 1) $descr .= " Phase $i";
    $current    = snmp_get($device, $volt_oid, "-Oqv");
    if (!$current) 
    {
      $volt_oid .= ".0";
      $current    = snmp_get($device, $volt_oid, "-Oqv");
    }
    $current   /= 10;
    $type       = "mge-ups";
    $precision  = 10;
    $index      = 100+$i;
    echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, $lowlimit, $limit, $current);
  }
}

## Riello UPS Voltages
if ($device['os'] == "netmanplus") 
{
  echo("NetMan Plus ");
  
  $oids = snmp_walk($device, "1.3.6.1.2.1.33.1.2.5", "-Osqn", "UPS-MIB");
  if ($debug) { echo($oids."\n"); }
  $oids = trim($oids);
  foreach(explode("\n", $oids) as $data) 
  {
    $data = trim($data);
    if ($data) 
    {
      list($oid,$descr) = explode(" ", $data,2);
      $split_oid = explode('.',$oid);
      $volt_id = $split_oid[count($split_oid)-1];
      $volt_oid  = "1.3.6.1.2.1.33.1.2.5.$volt_id";
      $precision = 10;
      $volt = snmp_get($device, $volt_oid, "-O vq") / $precision;
      #$volt = trim(shell_exec($config['snmpget'] . " -O qv -$snmpver -c $community $hostname:$port $volt_oid")) / $precision;
      $descr = "Battery" . (count(explode("\n",$oids)) == 1 ? '' : ' ' . ($volt_id+1));
      $type = "netmanplus";
      $index = 500+$volt_id;
      discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, NULL, NULL, $volt);
    }
  }

  $oids = trim(snmp_walk($device, "1.3.6.1.2.1.33.1.4.3.0", "-OsqnU"));
  if ($debug) { echo($oids."\n"); }
  list($unused,$numPhase) = explode(' ',$oids);
  for($i = 1; $i <= $numPhase;$i++)
  {
    $volt_oid   = ".1.3.6.1.2.1.33.1.4.4.1.2.$i";
    $descr      = "Output"; if ($numPhase > 1) $descr .= " Phase $i";
    $current    = snmp_get($device, $volt_oid, "-Oqv");
    $type       = "netmanplus";
    $precision  = 1;
    $index      = $i;
    echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, NULL, NULL, $current);
  }

  $oids = trim(snmp_walk($device, "1.3.6.1.2.1.33.1.3.2.0", "-OsqnU"));
  if ($debug) { echo($oids."\n"); }
  list($unused,$numPhase) = explode(' ',$oids);
  for($i = 1; $i <= $numPhase;$i++)
  {
    $volt_oid   = "1.3.6.1.2.1.33.1.3.3.1.3.$i";
    $descr      = "Input"; if ($numPhase > 1) $descr .= " Phase $i";
    $current    = snmp_get($device, $volt_oid, "-Oqv");
    $type       = "netmanplus";
    $precision  = 1;
    $index      = 100+$i;
    echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, NULL, NULL, $current);
  }

  $oids = trim(snmp_walk($device, "1.3.6.1.2.1.33.1.5.2.0", "-OsqnU"));
  if ($debug) { echo($oids."\n"); }
  list($unused,$numPhase) = explode(' ',$oids);
  for($i = 1; $i <= $numPhase;$i++)
  {
    $volt_oid   = "1.3.6.1.2.1.33.1.5.3.1.2.$i";
    $descr      = "Bypass"; if ($numPhase > 1) $descr .= " Phase $i";
    $current    = snmp_get($device, $volt_oid, "-Oqv");
    $type       = "netmanplus";
    $precision  = 1;
    $index      = 200+$i;
    echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, NULL, NULL, $current);
  }
}


if ($device['os'] == "gamatronicups") {

                for($i = 1; $i <= 3 ;$i++) {
                        $volt_oid   = "GAMATRONIC-MIB::gamatronicLTD.5.4.1.1.2.$i";
                        $descr = "Input Phase $i";
                        $volt = snmp_get($device, $volt_oid, "-Oqv");
                        $type = "gamatronicups";
                        $precision = 1;
                        $index = $i;
                        $lowlimit = 0;
                        $warnlimit = NULL;
                        $limit = NULL;

                        echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, $lowlimit, $warnlimit, $limit, $volt);

                }

                for($i = 1; $i <= 3 ;$i++) {
                        $volt_oid   = "GAMATRONIC-MIB::gamatronicLTD.5.5.1.1.2.$i";
                        $descr = "Output Phase $i";
                        $volt = snmp_get($device, $volt_oid, "-Oqv");
                        $type = "gamatronicups";
                        $precision = 1;
                        $index = 100+$i;
                        $lowlimit = 0;
                        $warnlimit = NULL;
                        $limit = NULL;

                        echo discover_volt($valid_volt,$device, $volt_oid, $index, $type, $descr, $precision, $lowlimit, $warnlimit, $limit, $volt);
                }

}


## Delete removed sensors

if($debug) { print_r($valid_volt); }

$sql = "SELECT * FROM voltage WHERE device_id = '".$device['device_id']."'";
if ($query = mysql_query($sql))
{
  while ($test_volt = mysql_fetch_array($query))
  {
    $index = $test_volt['volt_index'];
    $type = $test_volt['volt_type'];
    if($debug) { echo("$type -> $index\n"); }
    if(!$valid_volt[$type][$index]) {
      echo("-");
      mysql_query("DELETE FROM `voltage` WHERE volt_id = '" . $test_volt['volt_id'] . "'");
    }
  }
}

unset($valid_volt); echo("\n");

?>