-- ================================================================= -- Copyright (C) 2006 by HUAWEI TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI-ETHOAM-MIB -- Reference: -- Version: V1.0 -- History: -- ================================================================== HUAWEI-ETHOAM-MIB DEFINITIONS ::= BEGIN IMPORTS CounterBasedGauge64 FROM HCNUM-TC hwDatacomm FROM HUAWEI-MIB dot1agCfmMdIndex, dot1agCfmMdName, dot1agCfmMdLevel, dot1agCfmMaIndex, dot1agCfmMaName, dot1agCfmMaVlanVid, dot1agCfmMepIdentifier, dot1agCfmMepMacAddress, dot1agCfmMdEntry, dot1agCfmMaEntry, dot1agCfmMepEntry, Dot1agCfmMaintenanceDomainLevel, Dot1agCfmMepId, Dot1agCfmMhfCreation, Dot1agCfmCcmInterval, Dot1agCfmHighestDefectPri, Dot1agCfmLowestAlarmPri FROM IEEE802171-CFM-MIB ifIndex, InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB EnabledStatus FROM P-BRIDGE-MIB VlanIdOrNone FROM Q-BRIDGE-MIB OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, Counter32, BITS, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI MacAddress, TruthValue, RowStatus, TimeInterval, TimeStamp, TEXTUAL-CONVENTION FROM SNMPv2-TC; hwEthOamMib MODULE-IDENTITY LAST-UPDATED "200611020000Z" -- November 02, 2006 at 00:00 GMT ORGANIZATION "Huawei Technologies Co., Ltd. " CONTACT-INFO " R&D BeiJing, Huawei Technologies co.,Ltd. Huawei Bld.,NO.3 Xinxi Rd., Shang-Di Information Industry Base, Hai-Dian District Beijing P.R. China Zip:100085 Http://www.huawei.com E-mail:support@huawei.com " DESCRIPTION "Ethernet OAM MIB" ::= { hwEthOam 1 } -- -- Textual conventions -- HWDot1agCfmIfType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Type of interfaces, 1:vlan, 2:vsi. " SYNTAX INTEGER { vlan(1), vsi(2) } -- -- Textual conventions -- HWDetectType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Detect the mode type: Fast detect and standard detect " SYNTAX INTEGER { normalDetect(1), fastDetect(2) } -- Textual conventions for OAM MIB -- HWDot3Oui ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "24-bit Organizationally Unique Identifier. Information on OUIs can be found in IEEE 802-2001 [802-2001] Clause 9." SYNTAX OCTET STRING (SIZE (3)) HWTestMessageSendSpeed ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " Transmission rate: 1Mbps and 5Mbps. " SYNTAX INTEGER { oneMbps(1), fiveMbps(2) } HWTestMessageFinishedValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The five values indicates: has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib) " REFERENCE " " SYNTAX INTEGER { ready(1), testing(2), finished(3), failed(4), stop(5) } -- RFC2863 HWDot1agCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the possible values the Relay action field can take." REFERENCE "802.1ag clauses 12.14.7.5.3 g), 20.32.2.5, and Table 21-24" SYNTAX INTEGER { rlyHit(1), rlyFdb(2), rlyMpdb(3) } HWDot1agCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values returned in the ingress action field." REFERENCE "802.1ag clauses 12.14.7.5.3 k), 21.9.9.1, 20.35.2.6 and Table 21-26. " SYNTAX INTEGER { ingOk(1), ingDown(2), ingBlocked(3), ingVid(4) } HWLldpPortIdSubtype ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "LLDP interface ID sub type" SYNTAX INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } HWLldpPortId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If the associated LldpPortIdSubtype object has a value of 'interfaceAlias(1)', then the octet string identifies a particular instance of the ifAlias object (defined in IETF RFC 2863). If the particular ifAlias object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'portComponent(2)', then the octet string identifies a particular instance of the entPhysicalAlias object (defined in IETF RFC 2737) for a port or backplane component. If the associated LldpPortIdSubtype object has a value of 'macAddress(3)', then this string identifies a particular unicast source address (encoded in network byte order and IEEE 802.3 canonical bit order) associated with the port (IEEE Std 802-2001). If the associated LldpPortIdSubtype object has a value of 'networkAddress(4)', then this string identifies a network address associated with the port. The first octet contains the IANA AddressFamilyNumbers enumeration value for the specific address type, and octets 2 through N contain the networkAddress address value in network byte order. If the associated LldpPortIdSubtype object has a value of 'interfaceName(5)', then the octet string identifies a particular instance of the ifName object (defined in IETF RFC 2863). If the particular ifName object does not contain any values, another port identifier type should be used. If the associated LldpPortIdSubtype object has a value of 'agentCircuitId(6)', then this string identifies a agent-local identifier of the circuit (defined in RFC 3046). If the associated LldpPortIdSubtype object has a value of 'local(7)', then this string identifies a locally assigned port ID." SYNTAX OCTET STRING (SIZE (1..255)) HWDot1agCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Possible values returned in the egress action field" REFERENCE "802.1ag clauses 12.14.7.5.3 o), 21.9.10.1 and Table 21-28" SYNTAX INTEGER { egrOK(1), egrDown(2), egrBlocked(3), egrVid(4) } HWLldpManAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The value of a management address associated with the LLDP agent that may be used to reach higher layer entities to assist discovery by network management. It should be noted that appropriate security credentials, such as SNMP engineId, may be required to access the LLDP agent using a management address. These necessary credentials should be known by the network management and the objects associated with the credentials are not included in the LLDP agent." SYNTAX OCTET STRING (SIZE (1..31)) -- -- Node definitions -- -- Node definitions -- hwEthOam OBJECT IDENTIFIER ::= { hwDatacomm 136 } hwEthOam1ag OBJECT IDENTIFIER ::= { hwEthOamMib 1 } -- 1ag global scalar node hwDot1agCfmEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enable the Connectivity Fault Management globally on the device, which is the prerequisite for all the CFM related operations. Disabling the CFM can delete all the previous CFM configurations. " ::= { hwEthOam1ag 1 } hwDot1agCfmErrMsgStatisticsEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enable all the debugging of the error packet statistics globally. " ::= { hwEthOam1ag 2 } hwDot1agCfmMipCreation OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the MIP creation rules globally. " ::= { hwEthOam1ag 3 } hwDot1agCfmMacTunnelTraceResponseEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enable/Disable the Trace reverse function for the middle node of the MAC Tunnel. " ::= { hwEthOam1ag 4 } hwDot1agCfmErrorSmacStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics source mac for the global error packets. " ::= { hwEthOam1ag 5 } hwDot1agCfmErrorIntervalStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics interval for the global error packets. " ::= { hwEthOam1ag 6 } hwDot1agCfmErrorMaIdStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics MAID for the global error packets. " ::= { hwEthOam1ag 7 } hwDot1agCfmMdObjet OBJECT IDENTIFIER ::= { hwEthOam1ag 8 } -- hwDot1agCfmMdObjet hwDot1agCfmMdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1agCfmMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " MD table. " REFERENCE "802.1ag clause 3.16 and 18.2" ::= { hwDot1agCfmMdObjet 1 } hwDot1agCfmMdEntry OBJECT-TYPE SYNTAX HwDot1agCfmMdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MD table entry." AUGMENTS { dot1agCfmMdEntry } ::= { hwDot1agCfmMdTable 1 } HwDot1agCfmMdEntry ::= SEQUENCE { hwDot1agCfmMdErrMsgStatisticsEnabled EnabledStatus, hwDot1agCfmMdErrorSmacStatistics Counter32, hwDot1agCfmMdErrorIntervalStatistics Counter32, hwDot1agCfmMdErrorMaIdStatistics Counter32 } hwDot1agCfmMdErrMsgStatisticsEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Md enables the debugging of the error packet statistics. " ::= { hwDot1agCfmMdEntry 11 } hwDot1agCfmMdErrorSmacStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics source mac for the error packets in Md " ::= { hwDot1agCfmMdEntry 12 } hwDot1agCfmMdErrorIntervalStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics interval for the error packets in Md " ::= { hwDot1agCfmMdEntry 13 } hwDot1agCfmMdErrorMaIdStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics MAID for the error packets in Md " ::= { hwDot1agCfmMdEntry 14 } hwDot1agCfmMaObjet OBJECT IDENTIFIER ::= { hwEthOam1ag 9 } -- hwDot1agCfmMaObject hwDot1agCfmMaTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1agCfmMaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " REFERENCE "802.1ag clause 3.16 and 18.2" ::= { hwDot1agCfmMaObjet 1 } hwDot1agCfmMaEntry OBJECT-TYPE SYNTAX HwDot1agCfmMaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MA table entry." AUGMENTS { dot1agCfmMaEntry } ::= { hwDot1agCfmMaTable 1 } HwDot1agCfmMaEntry ::= SEQUENCE { hwDot1agCfmPriority Dot1agCfmMaintenanceDomainLevel, hwDot1agCfmMaCcmInterval INTEGER, hwDot1agCcSendEnabled EnabledStatus, hwDot1agCcReceiveEnabled EnabledStatus, hwDot1agCfmMaErrMsgStatisticsEnabled EnabledStatus, hwDot1agCfmMaErrorSmacStatistics Counter32, hwDot1agCfmMaErrorIntervalStatistics Counter32, hwDot1agCfmMaErrorMaIdStatistics Counter32, hwDot1agCfmMaDetectMalfunction Integer32, hwDot1agCfmMaBindIfId Integer32, hwDot1agCfmMaUnBindIfId Integer32, hwDot1agCfmMaIfType INTEGER } hwDot1agCfmPriority OBJECT-TYPE SYNTAX Dot1agCfmMaintenanceDomainLevel MAX-ACCESS read-create STATUS current DESCRIPTION "CFM priority,0~7 " REFERENCE "802.1ag clause 12.14.6.1.4" DEFVAL { 6 } ::= { hwDot1agCfmMaEntry 11 } hwDot1agCfmMaCcmInterval OBJECT-TYPE SYNTAX INTEGER { intervalInvalid(0), interval300hz(1), interval10ms(2), interval100ms(3), interval1s(4), interval10s(5), interval1min(6), interval10min(7), interval20ms(8), interval30ms(9), interval50ms(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "Interval between CCM transmissions to be used by all MEPs in the MA. " REFERENCE "802.1ag clause 12.14.6.1.3" DEFVAL { 4 } ::= { hwDot1agCfmMaEntry 12 } hwDot1agCcSendEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "TO ALL MEP: CC-Send enable " REFERENCE "802.1ag clause 12.14.6.1.4" ::= { hwDot1agCfmMaEntry 13 } hwDot1agCcReceiveEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Enable the CC reception debugging in Ma " REFERENCE "802.1ag clause 12.14.6.1.4" ::= { hwDot1agCfmMaEntry 14 } hwDot1agCfmMaErrMsgStatisticsEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION "MD enables the debugging of the error packets." ::= { hwDot1agCfmMaEntry 15 } hwDot1agCfmMaErrorSmacStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The results of the statistics source mac for the error packets in Ma" ::= { hwDot1agCfmMaEntry 16 } hwDot1agCfmMaErrorIntervalStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The results of the statistics interval for the error packets in Ma" ::= { hwDot1agCfmMaEntry 17 } hwDot1agCfmMaErrorMaIdStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The results of the statistics MAID for the error packets in Ma" ::= { hwDot1agCfmMaEntry 18 } hwDot1agCfmMaDetectMalfunction OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1ag malfunction informations from 802.1ag-self and associate modules." ::= { hwDot1agCfmMaEntry 19 } hwDot1agCfmMaBindIfId OBJECT-TYPE SYNTAX Integer32 (0..4096 | 65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Index of interfaces associated with MA." ::= { hwDot1agCfmMaEntry 20 } hwDot1agCfmMaUnBindIfId OBJECT-TYPE SYNTAX Integer32 (0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "Index of interfaces unassociated with MA." ::= { hwDot1agCfmMaEntry 21 } hwDot1agCfmMaIfType OBJECT-TYPE SYNTAX INTEGER { vlan(1), vsi(2), unbind(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Type of interfaces associated with MA." DEFVAL { 1 } ::= { hwDot1agCfmMaEntry 22 } hwDot1agCfmMepObjet OBJECT IDENTIFIER ::= { hwEthOam1ag 10 } hwDot1agCfmMepTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The expansion of the MEP table of the public MIB" REFERENCE "802.1ag clauses 3.17, 12.14.7 and 19.2" ::= { hwDot1agCfmMepObjet 1 } hwDot1agCfmMepEntry OBJECT-TYPE SYNTAX HwDot1agCfmMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MEP table entry" AUGMENTS { dot1agCfmMepEntry } ::= { hwDot1agCfmMepTable 1 } HwDot1agCfmMepEntry ::= SEQUENCE { hwDot1agCfmCcmOutIfIndex InterfaceIndex, hwDot1agCfmLbmOutIfIndex InterfaceIndex, hwDot1agCfmLtmOutIfIndex InterfaceIndex, hwDot1agCfmLbmPacketSize Integer32 } hwDot1agCfmCcmOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the outbound interface for the MEP in Up type." DEFVAL { "" } ::= { hwDot1agCfmMepEntry 11 } hwDot1agCfmLbmOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the outbound interface for the LBM." DEFVAL { "" } ::= { hwDot1agCfmMepEntry 12 } hwDot1agCfmLtmOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the outbound interface for the LTM." REFERENCE "802.1ag clauses 12.14.7.1.3 and 20.9.1" DEFVAL { "" } ::= { hwDot1agCfmMepEntry 13 } hwDot1agCfmLbmPacketSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the size of the LBM packets." ::= { hwDot1agCfmMepEntry 14 } hwDot1agCfmRMepObjet OBJECT IDENTIFIER ::= { hwEthOam1ag 11 } hwDot1agCfmRMepTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1agCfmRMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The remote MEP table " ::= { hwDot1agCfmRMepObjet 1 } hwDot1agCfmRMepEntry OBJECT-TYPE SYNTAX HwDot1agCfmRMepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The remote MEP entity " INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, hwDot1agCfmRMepIdentifier } ::= { hwDot1agCfmRMepTable 1 } HwDot1agCfmRMepEntry ::= SEQUENCE { hwDot1agCfmRMepIdentifier Dot1agCfmMepId, hwDot1agCfmRMepMacAddress MacAddress, hwDot1agCfmRMepCcReceiveEnabled EnabledStatus, hwDot1agCfmRMepErrMsgStatisticsEnabled EnabledStatus, hwDot1agCfmRMepHighestPrDefect Dot1agCfmHighestDefectPri, hwDot1agCfmRMepLowPrDef Dot1agCfmLowestAlarmPri, hwDot1agCfmRMepSomeRMepCcmDefect TruthValue, hwDot1agCfmRMepErrorCcmDefect TruthValue, hwDot1agCfmRMepXconCcmDefect TruthValue, hwDot1agCfmRMepSomeRdiDefect TruthValue, hwDot1agCfmRMepErrMacStatus TruthValue, hwDot1agCfmRMepFngAlarmTime Integer32, hwDot1agCfmRMepFngResetTime Integer32, hwDot1agCfmRMepErrorSmacStatistics Counter32, hwDot1agCfmRMepErrorIntervalStatistics Counter32, hwDot1agCfmRMepErrorMaIdStatistics Counter32, hwDot1agCfmRMepRowStatus RowStatus } hwDot1agCfmRMepIdentifier OBJECT-TYPE SYNTAX Dot1agCfmMepId MAX-ACCESS not-accessible STATUS current DESCRIPTION " The identifier of the RMEP " ::= { hwDot1agCfmRMepEntry 1 } hwDot1agCfmRMepMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "MAC address of the RMEP." ::= { hwDot1agCfmRMepEntry 11 } hwDot1agCfmRMepCcReceiveEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Enable the reception function of the RMEP CCM packets. " ::= { hwDot1agCfmRMepEntry 12 } hwDot1agCfmRMepErrMsgStatisticsEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " RMEP enables the debugging of the error packet statistics. " ::= { hwDot1agCfmRMepEntry 13 } hwDot1agCfmRMepHighestPrDefect OBJECT-TYPE SYNTAX Dot1agCfmHighestDefectPri MAX-ACCESS read-only STATUS current DESCRIPTION " The highest level of the faults found by the RMep " REFERENCE "802.1ag clause 12.14.7.1.3 20.32.9 and Table 20-1" ::= { hwDot1agCfmRMepEntry 14 } hwDot1agCfmRMepLowPrDef OBJECT-TYPE SYNTAX Dot1agCfmLowestAlarmPri MAX-ACCESS read-create STATUS current DESCRIPTION " The lowest level of the faults that produce the alarms. The alarms that are higher than this level will be reported. " REFERENCE "802.1ag clause 12.14.7.1.3 and 20.8.6 and Table 20-1" DEFVAL { macRemErrXcon } ::= { hwDot1agCfmRMepEntry 15 } hwDot1agCfmRMepSomeRMepCcmDefect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " The node indicates whether all the local MEPs in the MA receive the CC packets of the RMEP normally. " ::= { hwDot1agCfmRMepEntry 16 } hwDot1agCfmRMepErrorCcmDefect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " The node indicates that the error CC packets of the RMEP are received. " ::= { hwDot1agCfmRMepEntry 17 } hwDot1agCfmRMepXconCcmDefect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " The node indicates that the CC packets received from the RMEP and the local MAID do not match with each other. " ::= { hwDot1agCfmRMepEntry 18 } hwDot1agCfmRMepSomeRdiDefect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " The node indicates whether the CC packets received from RMEP carry the RDI information. " ::= { hwDot1agCfmRMepEntry 19 } hwDot1agCfmRMepErrMacStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " The node indicates whether the CCM packets received from the remote end carry theInterface TLV information. " ::= { hwDot1agCfmRMepEntry 20 } hwDot1agCfmRMepFngAlarmTime OBJECT-TYPE SYNTAX Integer32 (250..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.29.4) (default 2.5s). " REFERENCE "802.1ag clauses 12.14.6.1.3 and 20.32.3" DEFVAL { 250 } ::= { hwDot1agCfmRMepEntry 21 } hwDot1agCfmRMepFngResetTime OBJECT-TYPE SYNTAX Integer32 (250..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime,20.29.5) (default 10s). " REFERENCE "802.1ag clauses 12.14.6.1.3 and 20.32.4" DEFVAL { 1000 } ::= { hwDot1agCfmRMepEntry 22 } hwDot1agCfmRMepErrorSmacStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics for the error source mac packets received from RMEP " ::= { hwDot1agCfmRMepEntry 23 } hwDot1agCfmRMepErrorIntervalStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics for the error interval packets received from RMEP " ::= { hwDot1agCfmRMepEntry 24 } hwDot1agCfmRMepErrorMaIdStatistics OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The results of the statistics for the error MAID packets received from RMEP " ::= { hwDot1agCfmRMepEntry 25 } hwDot1agCfmRMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { hwDot1agCfmRMepEntry 51 } hwDot1agCfmMipObjet OBJECT IDENTIFIER ::= { hwEthOam1ag 12 } -- hwDot1agCfmMipObject hwDot1agCfmMipCreationTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1agCfmMipCreationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure the MIP rule table on the interface. " ::= { hwDot1agCfmMipObjet 1 } hwDot1agCfmMipCreationEntry OBJECT-TYPE SYNTAX HwDot1agCfmMipCreationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure the MIP rule entity on the interface. " INDEX { hwDot1agCfmIfIndex } ::= { hwDot1agCfmMipCreationTable 1 } HwDot1agCfmMipCreationEntry ::= SEQUENCE { hwDot1agCfmIfIndex InterfaceIndex, hwDot1agCfmMipCreationType Dot1agCfmMhfCreation, hwDot1agCfmMipCreationTypeRowStatus RowStatus } hwDot1agCfmIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Create the interface index of the MIP" ::= { hwDot1agCfmMipCreationEntry 1 } hwDot1agCfmMipCreationType OBJECT-TYPE SYNTAX Dot1agCfmMhfCreation MAX-ACCESS read-create STATUS current DESCRIPTION "MIP creation rules" ::= { hwDot1agCfmMipCreationEntry 11 } hwDot1agCfmMipCreationTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated." ::= { hwDot1agCfmMipCreationEntry 51 } hwDot1agCfmMipTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot1agCfmMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure the MIP rule table on the interface. " ::= { hwDot1agCfmMipObjet 2 } hwDot1agCfmMipEntry OBJECT-TYPE SYNTAX HwDot1agCfmMipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure the MIP rule entity on the interface. " INDEX { hwDot1agCfmMipIfIndex } ::= { hwDot1agCfmMipTable 1 } HwDot1agCfmMipEntry ::= SEQUENCE { hwDot1agCfmMipIfIndex InterfaceIndex, hwDot1agCfmMipLevel Dot1agCfmMaintenanceDomainLevel } hwDot1agCfmMipIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of the MIP interface" ::= { hwDot1agCfmMipEntry 1 } hwDot1agCfmMipLevel OBJECT-TYPE SYNTAX Dot1agCfmMaintenanceDomainLevel MAX-ACCESS read-only STATUS current DESCRIPTION "The Maintenance Domain Level." REFERENCE "802.1ag clause 12.14.5.1.3 b)" DEFVAL { 0 } ::= { hwDot1agCfmMipEntry 11 } hwEthOam3ah OBJECT IDENTIFIER ::= { hwEthOamMib 2 } -- --------------------------------------------- -- hwDot3ah -- --------------------------------------------- hwDot3ahEfmEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enable the EFM globally. " ::= { hwEthOam3ah 1 } -- EfmObject hwDot3ahEfmObject OBJECT IDENTIFIER ::= { hwEthOam3ah 2 } -- DetectModeTable hwDot3ahEfmDetectModeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmDetectModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Set the detection mode table in the last one kilometer on the interface. " ::= { hwDot3ahEfmObject 1 } hwDot3ahEfmDetectModeEntry OBJECT-TYPE SYNTAX HwDot3ahEfmDetectModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Set the detection mode entity in the last one kilometer on the interface. " AUGMENTS { hwDot3ahEfmEntry } ::= { hwDot3ahEfmDetectModeTable 1 } HwDot3ahEfmDetectModeEntry ::= SEQUENCE { hwDot3ahEfmDetectMode HWDetectType, hwDot3ahEfmDetectInterval TimeInterval, hwDot3ahEfmDetectMalfunction Integer32 } hwDot3ahEfmDetectMode OBJECT-TYPE SYNTAX HWDetectType MAX-ACCESS read-write STATUS current DESCRIPTION " Detection mode ( fast detection and standard detection) " DEFVAL { NormalDetect } ::= { hwDot3ahEfmDetectModeEntry 11 } hwDot3ahEfmDetectInterval OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-write STATUS current DESCRIPTION " Time interval of detection " ::= { hwDot3ahEfmDetectModeEntry 12 } hwDot3ahEfmDetectMalfunction OBJECT-TYPE SYNTAX Integer32 (0..768) MAX-ACCESS read-only STATUS current DESCRIPTION " Failure description from 802.3ah and from associated modules. " ::= { hwDot3ahEfmDetectModeEntry 13 } -- *************************************************************** -- -- Ethernet OAM Control group -- hwDot3ahEfmTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the primary controls and status for the OAM capabilities of an Ethernet like interface. There will be one row in this table for each Ethernet like interface in the system that supports the OAM functions defined in [802.3ah]. " ::= { hwDot3ahEfmObject 2 } hwDot3ahEfmEntry OBJECT-TYPE SYNTAX HwDot3ahEfmEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information on the Ethernet OAM function for a single Ethernet like interface. Entries in the table are created automatically for each interface supporting Ethernet OAM. The status of the row entry can be determined from hwDot3ahEfmOperStatus. A hwDot3ahEfmEntry is indexed in the hwDot3ahEfmTable by the ifIndex object of the Interfaces MIB. " INDEX { ifIndex } ::= { hwDot3ahEfmTable 1 } HwDot3ahEfmEntry ::= SEQUENCE { hwDot3ahEfmAdminState EnabledStatus, hwDot3ahEfmOperStatus INTEGER, hwDot3ahEfmMode INTEGER, hwDot3ahEfmMaxOamPduSize Unsigned32, hwDot3ahEfmConfigRevision Unsigned32, hwDot3ahEfmFunctionsSupported BITS } hwDot3ahEfmAdminState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The hwDot3ahEfmAdminState always starts in the disabled(2) state until an explicit management action or configuration information retained by the system causes a transition to the enabled(2) state. When enabled(1), Ethernet OAM will attempt to operate over this interface. " REFERENCE "[802.3ah], 30.3.6.1.2" ::= { hwDot3ahEfmEntry 1 } hwDot3ahEfmOperStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), linkFault(2), passiveWait(3), activeSendLocal(4), sendLocalAndRemote(5), sendLocalAndRemoteOk(6), oamPeeringLocallyRejected(7), oamPeeringRemotelyRejected(8), operational(9), nonOperHalfDuplex(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. " REFERENCE "[802.3ah], 30.3.6.1.4, 30.3.6.1.10, 30.3.6.1.11" ::= { hwDot3ahEfmEntry 2 } hwDot3ahEfmMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. " REFERENCE "[802.3ah], 30.3.6.1.3" ::= { hwDot3ahEfmEntry 3 } hwDot3ahEfmMaxOamPduSize OBJECT-TYPE SYNTAX Unsigned32 (64..1518) UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers. This value is determined by the local implementation. " REFERENCE "[802.3ah], 30.3.6.1.8" ::= { hwDot3ahEfmEntry 4 } hwDot3ahEfmConfigRevision OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The config revision is used by OAM entities to indicate configuration changes have occurred which might require the peer OAM entity to re-evaluate whether OAM peering is allowed. " REFERENCE "[802.3ah], 30.3.6.1.12" ::= { hwDot3ahEfmEntry 5 } hwDot3ahEfmFunctionsSupported OBJECT-TYPE SYNTAX BITS { unidirectionalSupport(0), loopbackSupport(1), eventSupport(2), variableSupport(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always required. These functional groups can be supported independently by any implementation. These values are communicated to the peer via the local configuration field of Information OAMPDUs. Setting 'unidirectionalSupport(0)' indicates that the OAM entity supports the transmission of OAMPDUs on links that are operating in unidirectional mode (traffic flowing in one direction only). Setting 'loopbackSupport(1)' indicates the OAM entity can initiate and respond to loopback commands. Setting 'eventSupport(2)' indicates the OAM entity can send and receive Event Notification OAMPDUs. Setting 'variableSupport(3)' indicates the OAM entity can send and receive Variable Request and Response OAMPDUs. " REFERENCE "[802.3ah], 30.3.6.1.6" ::= { hwDot3ahEfmEntry 6 } -- *************************************************************** -- -- Ethernet OAM Peer group -- hwDot3ahEfmPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the OAM peer for a particular Ethernet like interface. OAM entities communicate with a single OAM peer entity on Ethernet links on which OAM is enabled and operating properly. There is one entry in this table for each entry in the hwDot3ahEfmTable for which information on the peer OAM entity is available. " ::= { hwDot3ahEfmObject 3 } hwDot3ahEfmPeerEntry OBJECT-TYPE SYNTAX HwDot3ahEfmPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Ethernet like interface. Entries are automatically created when information about the OAM peer entity becomes available, and automatically deleted when the OAM peer entity is no longer in communication. Peer information is not available when hwDot3ahEfmOperStatus is disabled(1), linkFault(2), passiveWait(3), activeSendLocal(4). or nonOperHalfDuplex(10)). " INDEX { ifIndex } ::= { hwDot3ahEfmPeerTable 1 } HwDot3ahEfmPeerEntry ::= SEQUENCE { hwDot3ahEfmPeerMacAddress MacAddress, hwDot3ahEfmPeerVendorOui HWDot3Oui, hwDot3ahEfmPeerVendorInfo Unsigned32, hwDot3ahEfmPeerMode INTEGER, hwDot3ahEfmPeerMaxOamPduSize Unsigned32, hwDot3ahEfmPeerConfigRevision Unsigned32, hwDot3ahEfmPeerFunctionsSupported BITS } hwDot3ahEfmPeerMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. " REFERENCE "[802.3ah], 30.3.6.1.5." ::= { hwDot3ahEfmPeerEntry 1 } hwDot3ahEfmPeerVendorOui OBJECT-TYPE SYNTAX HWDot3Oui MAX-ACCESS read-only STATUS current DESCRIPTION "The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OAM entity. This value is initialized to zero before any Local Information TLV is received. " REFERENCE "[802.3ah], 30.3.6.1.16." ::= { hwDot3ahEfmPeerEntry 2 } hwDot3ahEfmPeerVendorInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine additional information about the peer entity. The format of the vendor information is unspecified within the 32-bit field. This value is initialized to zero before any Local Information TLV is received. " REFERENCE "[802.3ah], 30.3.6.1.17." ::= { hwDot3ahEfmPeerEntry 3 } hwDot3ahEfmPeerMode OBJECT-TYPE SYNTAX INTEGER { active(1), passive(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last Information OAMPDU received from the peer. The value is unknown(3) whenever no Local Information TLV has been received. The values of active(1) and passive(2) are returned when a Local Information TLV has been received indicating the peer is in active or passive mode, respectively. " REFERENCE "[802.3ah], 30.3.6.1.7." ::= { hwDot3ahEfmPeerEntry 4 } hwDot3ahEfmPeerMaxOamPduSize OBJECT-TYPE SYNTAX Unsigned32 (0..1518) UNITS "octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The maximum OAMPDU size can be determined from the PDU Configuration field of the Local Information TLV of the last Information OAMPDU received from the peer. A value of zero is returned if no Local Information TLV has been received. Otherwise, the value of the OAM peer's maximum OAMPDU size is returned in this value. Note that the values 1..63 are invalid sizes for Ethernet frames and should never appear. " REFERENCE "[802.3ah], 30.3.6.1.9." ::= { hwDot3ahEfmPeerEntry 5 } hwDot3ahEfmPeerConfigRevision OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OAM this interface. The configuration revision can be determined from the Revision field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. A value of zero is returned if no Local Information TLV has been received. " REFERENCE "[802.3ah], 30.3.6.1.13." ::= { hwDot3ahEfmPeerEntry 6 } hwDot3ahEfmPeerFunctionsSupported OBJECT-TYPE SYNTAX BITS { unidirectionalSupport(0), loopbackSupport(1), eventSupport(2), variableSupport(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to these functions. This value is initialized so all bits are clear. If unidirectionalSupport(0) is set, then the peer OAM entity supports sending OAM frames on Ethernet interfaces when the receive path is known to be inoperable. If loopbackSupport(1) is set, then the peer OAM entity can send and receive OAM loopback commands. If eventSupport(2) is set, then the peer OAM entity can send and receive event OAMPDUs to signal various error conditions. If variableSupport(3) is set, then the peer OAM entity can send and receive variable requests to monitor attribute value as described in Clause 57 of [802.3ah]. The capabilities of the OAM peer can be determined from the configuration field of the Local Information TLV of the most recently received Information OAMPDU with a Local Information TLV. All zeros are returned if no Local Information TLV has yet been received. " REFERENCE "[802.3ah], REFERENCE 30.3.6.1.7." ::= { hwDot3ahEfmPeerEntry 7 } -- *************************************************************** -- -- Ethernet OAM Loopback group -- hwDot3ahEfmLoopbackTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains controls for the loopback state of the local link as well as indicating the status of the loopback function. There is one entry in this table for each entry in hwDot3ahEfmTable that supports loopback functionality (where hwDot3ahEfmFunctionsSupported includes the loopbackSupport bit set). Loopback can be used to place the remote OAM entity in a state where every received frame (except OAMPDUs) is echoed back over the same interface on which they were received. In this state, at the remote entity, 'normal' traffic is disabled as only the looped back frames are transmitted on the interface. Loopback is thus an intrusive operation that prohibits normal data flow and should be used accordingly. " ::= { hwDot3ahEfmObject 4 } hwDot3ahEfmLoopbackEntry OBJECT-TYPE SYNTAX HwDot3ahEfmLoopbackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing information on the loopback status for a single Ethernet like interface. Entries in the table are automatically created whenever the local OAM entity supports loopback capabilities. The loopback status on the interface can be determined from the hwDot3ahEfmLoopbackStatus object. " INDEX { ifIndex } ::= { hwDot3ahEfmLoopbackTable 1 } HwDot3ahEfmLoopbackEntry ::= SEQUENCE { hwDot3ahEfmLoopbackStatus INTEGER, hwDot3ahEfmLoopbackIgnoreRx INTEGER, hwDot3ahEfmLoopbackTimeout Unsigned32 } hwDot3ahEfmLoopbackStatus OBJECT-TYPE SYNTAX INTEGER { noLoopback(1), initiatingLoopback (2), remoteLoopback(3), terminatingLoopback(4), localLoopback(5), unknown(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The loopback status of the OAM entity. When operating in normal mode with no loopback in progress, the status reads noLoopback(1). The values initiatingLooopback(2) and terminatingLoopback(4) can be read or written. The other values can only be read - they can never be written. " REFERENCE "[802.3ah], REFERENCE 57.2.11, 30.3.61.14, 30.3.6.1.15" ::= { hwDot3ahEfmLoopbackEntry 1 } hwDot3ahEfmLoopbackIgnoreRx OBJECT-TYPE SYNTAX INTEGER { ignore(1), process(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Since OAM loopback is a disruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM loopback commands are processed or ignored. When the value is ignore(1), received loopback commands are ignored. When the value is process(2), OAM loopback commands are processed. The default value is to ignore loopback commands (ignore(1)). " REFERENCE "[802.3ah], REFERENCE 57.2.11, 30.3.61.14, 30.3.6.1.15" ::= { hwDot3ahEfmLoopbackEntry 2 } hwDot3ahEfmLoopbackTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..1000) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the timeout period for a remote loopback. The value ranges from 0 to 1000 in minutes. The default value is 20 minutes. 0 indicates that no timeout period is set. " DEFVAL { 20 } ::= { hwDot3ahEfmLoopbackEntry 3 } -- *************************************************************** -- -- Ethernet OAM Statistics group -- hwDot3ahEfmStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains statistics for the OAM function on a particular Ethernet like interface. There is an entry in the table for every entry in the hwDot3ahEfmTable. The counters in this table are defined as 32-bit entries to match the counter size as defined in [802.3ah]. Given the OAM protocol is a slow protocol, the counters increment at a slow rate. " ::= { hwDot3ahEfmObject 5 } hwDot3ahEfmStatsEntry OBJECT-TYPE SYNTAX HwDot3ahEfmStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics information on the Ethernet OAM function for a single Ethernet like interface. Entries are automatically created for every entry in the hwDot3ahEfmTable. Counters are maintained across transitions in hwDot3ahEfmOperStatus. " INDEX { ifIndex } ::= { hwDot3ahEfmStatsTable 1 } HwDot3ahEfmStatsEntry ::= SEQUENCE { hwDot3ahEfmInformationTx Counter32, hwDot3ahEfmInformationRx Counter32, hwDot3ahEfmUniqueEventNotificationTx Counter32, hwDot3ahEfmUniqueEventNotificationRx Counter32, hwDot3ahEfmDuplicateEventNotificationTx Counter32, hwDot3ahEfmDuplicateEventNotificationRx Counter32, hwDot3ahEfmLoopbackControlTx Counter32, hwDot3ahEfmLoopbackControlRx Counter32, hwDot3ahEfmVariableRequestTx Counter32, hwDot3ahEfmVariableRequestRx Counter32, hwDot3ahEfmVariableResponseTx Counter32, hwDot3ahEfmVariableResponseRx Counter32, hwDot3ahEfmOrgSpecificTx Counter32, hwDot3ahEfmOrgSpecificRx Counter32, hwDot3ahEfmUnsupportedCodesTx Counter32, hwDot3ahEfmUnsupportedCodesRx Counter32, hwDot3ahEfmFramesLostDueToOam Counter32 } hwDot3ahEfmInformationTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Information OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.20." ::= { hwDot3ahEfmStatsEntry 1 } hwDot3ahEfmInformationRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Information OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.21." ::= { hwDot3ahEfmStatsEntry 2 } hwDot3ahEfmUniqueEventNotificationTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification transmissions are counted by hwDot3ahEfmDuplicateEventNotificationTx. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.22." ::= { hwDot3ahEfmStatsEntry 3 } hwDot3ahEfmUniqueEventNotificationRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification receptions are counted by hwDot3ahEfmDuplicateEventNotificationRx. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously received Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.24." ::= { hwDot3ahEfmStatsEntry 4 } hwDot3ahEfmDuplicateEventNotificationTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.23." ::= { hwDot3ahEfmStatsEntry 5 } hwDot3ahEfmDuplicateEventNotificationRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously received Event Notification OAMPDU Sequence Number. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.25." ::= { hwDot3ahEfmStatsEntry 6 } hwDot3ahEfmLoopbackControlTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Loopback Control OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.26." ::= { hwDot3ahEfmStatsEntry 7 } hwDot3ahEfmLoopbackControlRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Loopback Control OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.27." ::= { hwDot3ahEfmStatsEntry 8 } hwDot3ahEfmVariableRequestTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Request OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.28." ::= { hwDot3ahEfmStatsEntry 9 } hwDot3ahEfmVariableRequestRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Request OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.29." ::= { hwDot3ahEfmStatsEntry 10 } hwDot3ahEfmVariableResponseTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Response OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.30." ::= { hwDot3ahEfmStatsEntry 11 } hwDot3ahEfmVariableResponseRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Response OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.31." ::= { hwDot3ahEfmStatsEntry 12 } hwDot3ahEfmOrgSpecificTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Organization Specific OAMPDUs transmitted on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.32." ::= { hwDot3ahEfmStatsEntry 13 } hwDot3ahEfmOrgSpecificRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Organization Specific OAMPDUs received on this interface. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.33." ::= { hwDot3ahEfmStatsEntry 14 } hwDot3ahEfmUnsupportedCodesTx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.18." ::= { hwDot3ahEfmStatsEntry 15 } hwDot3ahEfmUnsupportedCodesRx OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of OAMPDUs received on this interface with an unsupported op-code. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.19." ::= { hwDot3ahEfmStatsEntry 16 } hwDot3ahEfmFramesLostDueToOam OBJECT-TYPE SYNTAX Counter32 UNITS "frames" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource contention. This counter is incremented whenever a frame is dropped by the OAM layer. Note that any Ethernet frame, not just OAMPDUs, may be dropped by the OAM layer. This can occur when an OAMPDU takes precedence over a 'normal' frame resulting in the 'normal' frame being dropped. When this counter is incremented, no other counters in this MIB are incremented. Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime. " REFERENCE "[802.3ah], 30.3.6.1.46." ::= { hwDot3ahEfmStatsEntry 17 } -- *************************************************************** -- -- Ethernet OAM Event Configuration group -- hwDot3ahEfmEventConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ethernet OAM includes the ability to generate and receive Event Notification OAMPDUs to indicate various link problems. This table contains the mechanisms to enable Event Notifications and configure the thresholds to generate the standard Ethernet OAM events. There is one entry in the table for every entry in hwDot3ahEfmTable that supports OAM events (where hwDot3ahEfmFunctionsSupported includes the eventSupport bit set). The values in the table are maintained across changes to hwDot3ahEfmOperStatus. The standard threshold crossing events are: - Errored Symbol Period Event. Generated when the number of symbol errors exceeds a threshold within a given window defined by a number of symbols (for example, 1,000 symbols out of 1,000,000 had errors). - Errored Frame Period Event. Generated when the number of frame errors exceeds a threshold within a given window defined by a number of frames (for example, 10 frames out of 1000 had errors). - Errored Frame Event. Generated when the number of frame errors exceeds a threshold within a given window defined by a period of time (for example, 10 frames in 1 second had errors). - Errored Frame Seconds Summary Event. Generated when the number of errored frame seconds exceeds a threshold within a given time period (for example, 10 errored frame seconds within the last 100 seconds). An errored frame second is defined as a 1 second interval which had >0 frame errors. There are other events (dying gasp, critical events) that are not threshold crossing events but which can be enabled/disabled via this table. " ::= { hwDot3ahEfmObject 6 } hwDot3ahEfmEventConfigEntry OBJECT-TYPE SYNTAX HwDot3ahEfmEventConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries are automatically created and deleted from this table, and exist whenever the OAM entity supports Ethernet OAM events (as indicated by the eventSupport bit in hwDot3ahEfmFunctionsSuppported). Values in the table are maintained across changes to the value of hwDot3ahEfmOperStatus. Event configuration controls when the local management entity sends Event Notification OAMPDUs to its OAM peer, and when certain event flags are set or cleared in OAMPDUs. " INDEX { ifIndex } ::= { hwDot3ahEfmEventConfigTable 1 } HwDot3ahEfmEventConfigEntry ::= SEQUENCE { hwDot3ahEfmErrSymPeriodWindowHi Unsigned32, hwDot3ahEfmErrSymPeriodWindowLo Unsigned32, hwDot3ahEfmErrSymPeriodThresholdHi Unsigned32, hwDot3ahEfmErrSymPeriodThresholdLo Unsigned32, hwDot3ahEfmErrSymPeriodEvNotifEnable TruthValue, hwDot3ahEfmErrFramePeriodWindow Unsigned32, hwDot3ahEfmErrFramePeriodThreshold Unsigned32, hwDot3ahEfmErrFramePeriodEvNotifEnable TruthValue, hwDot3ahEfmErrFrameWindow Unsigned32, hwDot3ahEfmErrFrameThreshold Unsigned32, hwDot3ahEfmErrFrameEvNotifEnable TruthValue, hwDot3ahEfmErrFrameSecsSummaryWindow Integer32, hwDot3ahEfmErrFrameSecsSummaryThreshold Integer32, hwDot3ahEfmErrFrameSecsEvNotifEnable TruthValue, hwDot3ahEfmDyingGaspEnable TruthValue, hwDot3ahEfmCriticalEventEnable TruthValue } hwDot3ahEfmErrSymPeriodWindowHi OBJECT-TYPE SYNTAX Unsigned32 UNITS "2^32 symbols" MAX-ACCESS read-write STATUS current DESCRIPTION "The two objects hwDot3ahEfmErrSymPeriodWindowHi and hwDot3ahEfmErrSymPeriodLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi) + hwDot3ahEfmErrSymPeriodWindowLo If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. The default value for hwDot3ahEfmErrSymPeriodWindow is the number of symbols in one second for the underlying physical layer. " REFERENCE "[802.3ah], 30.3.6.1.34" ::= { hwDot3ahEfmEventConfigEntry 1 } hwDot3ahEfmErrSymPeriodWindowLo OBJECT-TYPE SYNTAX Unsigned32 UNITS "symbols" MAX-ACCESS read-write STATUS current DESCRIPTION "The two objects hwDot3ahEfmErrSymPeriodWindowHi and hwDot3ahEfmErrSymPeriodWindowLo together form an unsigned 64-bit integer representing the number of symbols over which this threshold event is defined. This is defined as hwDot3ahEfmErrSymPeriodWindow = ((2^32)*hwDot3ahEfmErrSymPeriodWindowHi) + hwDot3ahEfmErrSymPeriodWindowLo If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. The default value for hwDot3ahEfmErrSymPeriodWindow is the number of symbols in one second for the underlying physical layer. " REFERENCE "[802.3ah], 30.3.6.1.34" ::= { hwDot3ahEfmEventConfigEntry 2 } hwDot3ahEfmErrSymPeriodThresholdHi OBJECT-TYPE SYNTAX Unsigned32 UNITS "2^32 symbols" MAX-ACCESS read-write STATUS current DESCRIPTION "The two objects hwDot3ahEfmErrSymPeriodThresholdHi and hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. This is defined as hwDot3ahEfmErrSymPeriodThreshold = ((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi) + hwDot3ahEfmErrSymPeriodThresholdLo If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. The default value for hwDot3ahEfmErrSymPeriodThreshold is one symbol errors. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. " REFERENCE "[802.3ah], 30.3.6.1.34" ::= { hwDot3ahEfmEventConfigEntry 3 } hwDot3ahEfmErrSymPeriodThresholdLo OBJECT-TYPE SYNTAX Unsigned32 UNITS "symbols" MAX-ACCESS read-write STATUS current DESCRIPTION "The two objects hwDot3ahEfmErrSymPeriodThresholdHi and hwDot3ahEfmErrSymPeriodThresholdLo together form an unsigned 64-bit integer representing the number of symbol errors that must occur within a given window to cause this event. This is defined as hwDot3ahEfmErrSymPeriodThreshold = ((2^32) * hwDot3ahEfmErrSymPeriodThresholdHi) + hwDot3ahEfmErrSymPeriodThresholdLo If hwDot3ahEfmErrSymPeriodThreshold symbol errors occur within a window of hwDot3ahEfmErrSymPeriodWindow symbols, an Event Notification OAMPDU should be generated with an Errored Symbol Period Event TLV indicating the threshold has been crossed in this window. The default value for hwDot3ahEfmErrSymPeriodThreshold is one symbol error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. " REFERENCE "[802.3ah], 30.3.6.1.34" ::= { hwDot3ahEfmEventConfigEntry 4 } hwDot3ahEfmErrSymPeriodEvNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the OAM entity should send an Event Notification OAMPDU when an Errored Symbol Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. " ::= { hwDot3ahEfmEventConfigEntry 5 } hwDot3ahEfmErrFramePeriodWindow OBJECT-TYPE SYNTAX Unsigned32 UNITS "frames" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received over the physical layer in one second. If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a window of hwDot3ahEfmErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window. " REFERENCE "[802.3ah], 30.3.6.1.38" ::= { hwDot3ahEfmEventConfigEntry 6 } hwDot3ahEfmErrFramePeriodThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "frames" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If hwDot3ahEfmErrFramePeriodThreshold frame errors occur within a window of hwDot3ahEfmErrFramePeriodWindow frames, an Event Notification OAMPDU should be generated with an Errored Frame Period Event TLV indicating the threshold has been crossed in this window. " REFERENCE "[802.3ah], 30.3.6.1.38" ::= { hwDot3ahEfmEventConfigEntry 7 } hwDot3ahEfmErrFramePeriodEvNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Period Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. " ::= { hwDot3ahEfmEventConfigEntry 8 } hwDot3ahEfmErrFrameWindow OBJECT-TYPE SYNTAX Unsigned32 UNITS "tenths of a second" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If hwDot3ahEfmErrFrameThreshold frame errors occur within a window of hwDot3ahEfmErrFrameWindow seconds (measured in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window. " REFERENCE "[802.3ah], 30.3.6.1.36" ::= { hwDot3ahEfmEventConfigEntry 9 } hwDot3ahEfmErrFrameThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "frames" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If hwDot3ahEfmErrFrameThreshold frame errors occur within a window of hwDot3ahEfmErrFrameWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Event TLV indicating the threshold has been crossed in this window. " REFERENCE "[802.3ah], 30.3.6.1.36" ::= { hwDot3ahEfmEventConfigEntry 10 } hwDot3ahEfmErrFrameEvNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the OAM entity should send an Event Notification OAMPDU when an Errored Frame Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. " ::= { hwDot3ahEfmEventConfigEntry 11 } hwDot3ahEfmErrFrameSecsSummaryWindow OBJECT-TYPE SYNTAX Integer32 (100..9000) UNITS "tenths of a second" MAX-ACCESS read-write STATUS current DESCRIPTION "The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 600 (60 seconds). If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window. " REFERENCE "[802.3ah], 30.3.6.1.40" ::= { hwDot3ahEfmEventConfigEntry 12 } hwDot3ahEfmErrFrameSecsSummaryThreshold OBJECT-TYPE SYNTAX Integer32 (0..900) UNITS "errored frame seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If the threshold value is zero, then an Event Notification OAMPDU is sent periodically (at the end of every window). This can be used as an asynchronous notification to the peer OAM entity of the statistics related to this threshold crossing alarm. If hwDot3ahEfmErrFrameSecsSummaryThreshold frame errors occur within a window of hwDot3ahEfmErrFrameSecsSummaryWindow (in tenths of seconds), an Event Notification OAMPDU should be generated with an Errored Frame Seconds Summary Event TLV indicating the threshold has been crossed in this window. " REFERENCE "[802.3ah], 30.3.6.1.40" ::= { hwDot3ahEfmEventConfigEntry 13 } hwDot3ahEfmErrFrameSecsEvNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the local OAM entity should send an Event Notification OAMPDU when an Errored Frame Seconds Event occurs. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. " ::= { hwDot3ahEfmEventConfigEntry 14 } hwDot3ahEfmDyingGaspEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the local OAM entity should attempt to indicate a dying gasp via the OAMPDU flags field to its peer OAM entity when a dying gasp event occurs. The exact definition of a dying gasp event is implementation dependent. If the system does not support dying gasp capability, setting this object has no effect, and reading the object should always result in 'false'. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. " ::= { hwDot3ahEfmEventConfigEntry 15 } hwDot3ahEfmCriticalEventEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "If true, the local OAM entity should attempt to indicate a critical event via the OAMPDU flags to its peer OAM entity when a critical event occurs. The exact definition of a critical event is implementation dependent. If the system does not support critical event capability, setting this object has no effect, and reading the object should always result in 'false'. By default, this object should have the value true for Ethernet like interfaces that support OAM. If the OAM layer does not support event notifications (as indicated via the hwDot3ahEfmFunctionsSupported attribute), this value is ignored. " ::= { hwDot3ahEfmEventConfigEntry 16 } -- ************************************************************** -- -- Ethernet OAM Event Log group -- hwDot3ahEfmEventLogTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmEventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in locally generated OAMPDUs, and remotely detected events, which are detected by the OAM peer entity and signaled to the local entity via Ethernet OAM. Ethernet OAM events can be signaled by Event Notification OAMPDUs or by the flags field in any OAMPDU. This table contains both threshold crossing events and non-threshold crossing events. The parameters for the threshold window, threshold value, and actual value (hwDot3ahEfmEventLogWindowXX, hwDot3ahEfmEventLogThresholdXX, hwDot3ahEfmEventLogValue) are only applicable to threshold crossing events, and are returned as all F's (2^32 - 1) for non-threshold crossing events. Entries in the table are automatically created when such events are detected. The size of the table is implementation dependent. When the table reaches its maximum size, older entries are automatically deleted to make room for newer entries. " ::= { hwDot3ahEfmObject 7 } hwDot3ahEfmEventLogEntry OBJECT-TYPE SYNTAX HwDot3ahEfmEventLogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the hwDot3ahEfmEventLogTable. Entries are automatically created whenever Ethernet OAM events occur at the local OAM entity, and when Event Notification OAMPDUs are received at the local OAM entity (indicating events have occurred at the peer OAM entity). The size of the table is implementation dependent, but when the table becomes full, older events are automatically deleted to make room for newer events. The table index hwDot3ahEfmEventLogIndex increments for each new entry, and when the maximum value is reached the value restarts at zero. " INDEX { ifIndex, hwDot3ahEfmEventLogIndex } ::= { hwDot3ahEfmEventLogTable 1 } HwDot3ahEfmEventLogEntry ::= SEQUENCE { hwDot3ahEfmEventLogIndex Unsigned32, hwDot3ahEfmEventLogTimestamp TimeStamp, hwDot3ahEfmEventLogOui HWDot3Oui, hwDot3ahEfmEventLogType Unsigned32, hwDot3ahEfmEventLogLocation INTEGER, hwDot3ahEfmEventLogWindowHi Unsigned32, hwDot3ahEfmEventLogWindowLo Unsigned32, hwDot3ahEfmEventLogThresholdHi Unsigned32, hwDot3ahEfmEventLogThresholdLo Unsigned32, hwDot3ahEfmEventLogValue CounterBasedGauge64, hwDot3ahEfmEventLogRunningTotal CounterBasedGauge64, hwDot3ahEfmEventLogEventTotal Unsigned32 } hwDot3ahEfmEventLogIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary integer for identifying individual events within the event log. " ::= { hwDot3ahEfmEventLogEntry 1 } hwDot3ahEfmEventLogTimestamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For remotely generated events, the time of the event is indicated by the reception of the Event Notification OAMPDU indicating the event occurred on the peer. A system may attempt to adjust the timestamp value to more accurately reflect the time of the event at the peer OAM entity by using other information, such as that found in the timestamp found of the Event Notification TLVs, which provides an indication of the relative time between events at the peer entity. " ::= { hwDot3ahEfmEventLogEntry 2 } hwDot3ahEfmEventLogOui OBJECT-TYPE SYNTAX HWDot3Oui MAX-ACCESS read-only STATUS current DESCRIPTION "The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of 0x0180C2. Organizations defining their own Event Notification TLVs include their OUI in the Event Notification TLV which gets reflected here. " ::= { hwDot3ahEfmEventLogEntry 3 } hwDot3ahEfmEventLogType OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFramePeriodEvent (2), erroredFrameEvent(3), erroredFrameSecondsEvent(4), linkFault(256), dyingGaspEvent(257), criticalLinkEvent(258) The first four are considered threshold crossing events as they are generated when a metric exceeds a given value within a specified window. The other three are not threshold crossing events. When the OUI is not 71874 (0x0180C2 in hex), then some other organization has defined the event space. If event subtyping is known to the implementation, it may be reflected here. Otherwise, this value should return all Fs (2^32 - 1). " REFERENCE "[802.3ah], 30.3.6.1.10 and 57.5.3." ::= { hwDot3ahEfmEventLogEntry 4 } hwDot3ahEfmEventLogLocation OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Whether this event occurred locally (local(1)), or was received from the OAM peer via Ethernet OAM (remote(2)). " ::= { hwDot3ahEfmEventLogEntry 5 } hwDot3ahEfmEventLogWindowHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the threshold crossing event (for example, 5, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi) + hwDot3ahEfmEventLogWindowLo Otherwise, this value is returned as all F's (2^32 - 1) and adds no useful information. " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 6 } hwDot3ahEfmEventLogWindowLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventWindowHi and hwDot3ahEfmEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the threshold crossing event (for example, 5, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hwDot3ahEfmEventLogWindow = ((2^32) * hwDot3ahEfmEventLogWindowHi) + hwDot3ahEfmEventLogWindowLo Otherwise, this value is returned as all F's (2^32 - 1) and adds no useful information. " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 7 } hwDot3ahEfmEventLogThresholdHi OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold crossing event (for example, 10, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi) + hwDot3ahEfmEventLogThresholdLo Otherwise, this value is returned as all F's (2^32 -1) and adds no useful information. " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 8 } hwDot3ahEfmEventLogThresholdLo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "If the event represents a threshold crossing event, the two objects hwDot3ahEfmEventThresholdHi and hwDot3ahEfmEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold crossing event (for example, 10, when 11 occurrences happened in 5 seconds while the threshold was 10). The two objects are combined as: hwDot3ahEfmEventLogThreshold = ((2^32) * hwDot3ahEfmEventLogThresholdHi) + hwDot3ahEfmEventLogThresholdLo Otherwise, this value is returned as all F's (2^32 - 1) and adds no useful information. " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 9 } hwDot3ahEfmEventLogValue OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (for example, 11, when 11 occurrences happened in 5 seconds while the threshold was 10). Otherwise, this value is returned as all F's (2^64 - 1) and adds no useful information. " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 10 } hwDot3ahEfmEventLogRunningTotal OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing events, the number of events (hwDot3ahEfmLogRunningTotal) and the number of resultant Event Notifications (hwDot3ahEfmLogEventTotal) should be identical. For threshold crossing events, since multiple occurrences may be required to cross the threshold, these values are likely different. This value represents the total number of times this event has happened since the last reset (for example, 3253, when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold crossing events since the last reset). " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 11 } hwDot3ahEfmEventLogEventTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Each Event Notification TLV contains a running total of the number of times an event has occurred, as well as the number of times an Event Notification for the event has been transmitted. For non-threshold crossing events, the number of events (hwDot3ahEfmLogRunningTotal) and the number of resultant Event Notifications (hwDot3ahEfmLogEventTotal) should be identical. For threshold crossing events, since multiple occurrences may be required to cross the threshold, these values are likely different. This value represents the total number of times one or more of these occurrences have resulted in an Event Notification (for example, 51 when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold crossing events since the last reset). " REFERENCE "[802.3ah], 30.3.6.1.37 and 57.5.3.2." ::= { hwDot3ahEfmEventLogEntry 12 } hwDot3ahEfmManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEfmManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configurations of binding relationships between EFM and other modules. " ::= { hwDot3ahEfmObject 8 } hwDot3ahEfmManagerEntry OBJECT-TYPE SYNTAX HwDot3ahEfmManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains configurations of binding relationships between EFM and other modules. " INDEX { ifIndex } ::= { hwDot3ahEfmManagerTable 1 } HwDot3ahEfmManagerEntry ::= SEQUENCE { hwDot3ahEfmTriggerIfDown EnabledStatus } hwDot3ahEfmTriggerIfDown OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether EFM is bound to the interface. If it is enabled(1), after EFM checks that the link times out, the current Ethernet interface is shut down for three seconds and then recovers. The default value is disabled(2). " ::= { hwDot3ahEfmManagerEntry 1 } -- Ethernet OAM EVRRP group -- add by liujin 64168 2008-9-25 hwDot3ahEvrrpTable OBJECT-TYPE SYNTAX SEQUENCE OF HwDot3ahEvrrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains information about the OAM Evrrp project for a particular Ethernet like interface. " ::= { hwDot3ahEfmObject 9 } hwDot3ahEvrrpEntry OBJECT-TYPE SYNTAX HwDot3ahEvrrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table of hwDot3ahEvrrpTable, containing information on the OAM Evrrp entity for a single Ethernet like interface. Note that there is at most one OAM Evrrp for each Ethernet like interface. " INDEX { ifIndex } ::= { hwDot3ahEvrrpTable 1 } HwDot3ahEvrrpEntry ::= SEQUENCE { hwDot3ahEvrrpCpuState INTEGER, hwDot3ahEvrrpTriggerIfDown EnabledStatus } hwDot3ahEvrrpCpuState OBJECT-TYPE SYNTAX INTEGER { master(1), slave(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the state in the OAMPDU which sended by the peer interface. If it is master(1), EFM will make the link work as the master state. And if it is slave(2), EFM will make the link works as the slave chain link. The default state is unknown(3). That means the peer interface didn't send any OAMPDU which contains the state of link status. " ::= { hwDot3ahEvrrpEntry 1 } hwDot3ahEvrrpTriggerIfDown OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether EFM is bound to the interface. If it is enabled(1), after EFM checks that the link times out, the current Ethernet interface link state will be set to EFM down. And all of the PDU operation will be stop. The default value is disabled(2). " ::= { hwDot3ahEvrrpEntry 2 } ------------------------------------------------------------------------------ -- END for EVRRP ------------------------------------------------------------------------------ hwOamManager OBJECT IDENTIFIER ::= { hwEthOamMib 3 } hwTestMessage OBJECT IDENTIFIER ::= { hwEthOamMib 4 } hwTestMessageObject OBJECT IDENTIFIER ::= { hwTestMessage 1 } -- hwTestMessageTableNextIndex hwTestMessageTableNextIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Search the next hwTestMessageTable instance. " ::= { hwTestMessageObject 1 } -- hwDot3ahEfmDetectModeTable hwTestMessageTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTestMessageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The definition of the tested packets format and the transmission of the tested packets " ::= { hwTestMessageObject 2 } hwTestMessageEntry OBJECT-TYPE SYNTAX HwTestMessageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for Test Message Table." INDEX { hwTestMessageIndex } ::= { hwTestMessageTable 1 } HwTestMessageEntry ::= SEQUENCE { hwTestMessageIndex Unsigned32, hwTestMessageMacAddress MacAddress, hwTestMessageVlanID Unsigned32, hwTestMessageInterface OCTET STRING, hwTestMessageServiceInstance OCTET STRING, hwTestMessagePacketSize Unsigned32, hwTestMessageSendPackets Unsigned32, hwTestMessageSendSpeed HWTestMessageSendSpeed, hwTestMessageSendEnabled TruthValue, hwTestMessageSendFinished HWTestMessageFinishedValue, hwTestMessageRowStatus RowStatus } hwTestMessageIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Set the index for the tested packets table " ::= { hwTestMessageEntry 1 } hwTestMessageMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " The destination MAC address " ::= { hwTestMessageEntry 11 } hwTestMessageVlanID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION " VLAN index " ::= { hwTestMessageEntry 12 } hwTestMessageInterface OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " If the interface is specified, specify the interface name. " ::= { hwTestMessageEntry 13 } hwTestMessageServiceInstance OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION " Name of the service instance " ::= { hwTestMessageEntry 14 } hwTestMessagePacketSize OBJECT-TYPE SYNTAX Unsigned32 (64..1518) MAX-ACCESS read-create STATUS current DESCRIPTION " The length of the sent tested packets ranges from 64 to 1500 in byte, and the default value is 64. " DEFVAL { 64 } ::= { hwTestMessageEntry 15 } hwTestMessageSendPackets OBJECT-TYPE SYNTAX Unsigned32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION " The number of the sent tested packets ranges from 1 to 65535 in integer, and the default value is 5. " DEFVAL { 5 } ::= { hwTestMessageEntry 16 } hwTestMessageSendSpeed OBJECT-TYPE SYNTAX HWTestMessageSendSpeed MAX-ACCESS read-create STATUS current DESCRIPTION " Enumerated type indicates the rate of sending the packets: 1Mbps and 5. The default is 1Mbps. " DEFVAL { oneMbps } ::= { hwTestMessageEntry 17 } hwTestMessageSendEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION " The sending and termination of the tested packets " ::= { hwTestMessageEntry 18 } hwTestMessageSendFinished OBJECT-TYPE SYNTAX HWTestMessageFinishedValue MAX-ACCESS read-only STATUS current DESCRIPTION " View whether the tested packets are stopped to be sent: 1, 2, 3, 4, and 5 indicate that has not run/is running/the previous test terminates normally/the previous test terminates abnormally/the previous test is interrupted (through ctrl+c or mib) " ::= { hwTestMessageEntry 19 } hwTestMessageRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. " ::= { hwTestMessageEntry 51 } hwTestMessageResultTable OBJECT-TYPE SYNTAX SEQUENCE OF HwTestMessageResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " View the returned results after tests " ::= { hwTestMessageObject 3 } hwTestMessageResultEntry OBJECT-TYPE SYNTAX HwTestMessageResultEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for Test Message Table." INDEX { hwTestMessageIndex } ::= { hwTestMessageResultTable 1 } HwTestMessageResultEntry ::= SEQUENCE { hwTestMessageResultSendPackets Unsigned32, hwTestMessageResultReceivedPackets Unsigned32, hwTestMessageResultPacketsLost Unsigned32, hwTestMessageResultSendBytes Unsigned32, hwTestMessageResultReceivedBytes Unsigned32, hwTestMessageResultBytesLost Unsigned32, hwTestMessageBeginTimeStamp TimeStamp, hwTestMessageEndTimeStamp TimeStamp } hwTestMessageResultSendPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the sent packets " ::= { hwTestMessageResultEntry 11 } hwTestMessageResultReceivedPackets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the received packets " ::= { hwTestMessageResultEntry 12 } hwTestMessageResultPacketsLost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " Packets loss ratio " ::= { hwTestMessageResultEntry 13 } hwTestMessageResultSendBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the sent bytes " ::= { hwTestMessageResultEntry 14 } hwTestMessageResultReceivedBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the received bytes " ::= { hwTestMessageResultEntry 15 } hwTestMessageResultBytesLost OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the lost bytes " ::= { hwTestMessageResultEntry 16 } hwTestMessageBeginTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The time of starting the Test operation " ::= { hwTestMessageResultEntry 17 } hwTestMessageEndTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The time of ending the Test operation " ::= { hwTestMessageResultEntry 18 } hwGmacObjects OBJECT IDENTIFIER ::= { hwEthOamMib 5 } hwGmacPingEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enable the Gmac Ping globally. " ::= { hwGmacObjects 1 } hwGmacTraceEnabled OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION " Enable the Gmac Trace globally. " ::= { hwGmacObjects 2 } hwGmacPingTable OBJECT-TYPE SYNTAX SEQUENCE OF HwGmacPingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entries related to the Gmac Ping include the parameters input by users and the returned results. " ::= { hwGmacObjects 3 } hwGmacPingEntry OBJECT-TYPE SYNTAX HwGmacPingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table entry of the GmacPing " INDEX { hwGmacPingIndex } ::= { hwGmacPingTable 1 } HwGmacPingEntry ::= SEQUENCE { hwGmacPingIndex Unsigned32, hwGmacPingEnable EnabledStatus, hwGmacPingTimeStamp TimeStamp, hwGmacPingMacAddress MacAddress, hwGmacPingVlanVid VlanIdOrNone, hwGmacPingTimeOut Integer32, hwGmacPingTimes Integer32, hwGmacPingOutIfIndex InterfaceIndexOrZero, hwGmacPingSize Integer32, hwGmacPingRespondIn Counter32, hwGmacPingRTTMin Unsigned32, hwGmacPingRTTMax Unsigned32, hwGmacPingRTTAvg Unsigned32, hwGmacPingPacketLossRatio Unsigned32, hwGmacPingVsiVid Integer32, hwGmacPingIfType HWDot1agCfmIfType, hwGmacPingRowStatus RowStatus } hwGmacPingIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the Gmac Ping test case " ::= { hwGmacPingEntry 1 } hwGmacPingEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Start the Gmac Ping operation " ::= { hwGmacPingEntry 11 } hwGmacPingTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION " The time of starting the Gmac Ping " ::= { hwGmacPingEntry 12 } hwGmacPingMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " The destination MAC address of the Gmac Ping " ::= { hwGmacPingEntry 13 } hwGmacPingVlanVid OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION " Identify that based on which VLAN the Gmac Ping carries out the Ping operation. " ::= { hwGmacPingEntry 14 } hwGmacPingTimeOut OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION " The timeout time of the Gmac Ping input by users is in ms, and the default value is 2000. " DEFVAL { 2000 } ::= { hwGmacPingEntry 15 } -- hwGmacPingTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The times for the users to input the Gmac Ping operation " DEFVAL { 5 } ::= { hwGmacPingEntry 16 } hwGmacPingOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION " Specify of the outbound interface for the Gmac Ping operation. " DEFVAL { 0 } ::= { hwGmacPingEntry 17 } hwGmacPingSize OBJECT-TYPE SYNTAX Integer32 (95..1500) MAX-ACCESS read-create STATUS current DESCRIPTION " The size of the Gmac Ping packets input by users " DEFVAL { 95 } ::= { hwGmacPingEntry 18 } hwGmacPingRespondIn OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of the legal packets received from the Gmac Ping " ::= { hwGmacPingEntry 19 } hwGmacPingRTTMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The minimum delay " ::= { hwGmacPingEntry 20 } hwGmacPingRTTMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The maximum delay " ::= { hwGmacPingEntry 21 } hwGmacPingRTTAvg OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The average delay " ::= { hwGmacPingEntry 22 } hwGmacPingPacketLossRatio OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION " The packet loss ratio " ::= { hwGmacPingEntry 23 } hwGmacPingVsiVid OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION " Identify the source VSI of Gmac Ping. " ::= { hwGmacPingEntry 24 } hwGmacPingIfType OBJECT-TYPE SYNTAX HWDot1agCfmIfType MAX-ACCESS read-create STATUS current DESCRIPTION "Type of interfaces associated with Ping, 1:vlan, 2:vsi." ::= { hwGmacPingEntry 25 } hwGmacPingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated." ::= { hwGmacPingEntry 51 } hwGmacTraceTable OBJECT-TYPE SYNTAX SEQUENCE OF HwGmacTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entries related to the Gmac Trace include the parameters input by users and the filed value of the sent Trace packets. " ::= { hwGmacObjects 4 } hwGmacTraceEntry OBJECT-TYPE SYNTAX HwGmacTraceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the GMAC Trace table entry." INDEX { hwGmacTraceIndex } ::= { hwGmacTraceTable 1 } HwGmacTraceEntry ::= SEQUENCE { hwGmacTraceIndex Unsigned32, hwGmacTraceEnable EnabledStatus, hwGmacTraceTimeStamp TimeStamp, hwGmacTraceMacAddress MacAddress, hwGmacTraceVlanVid VlanIdOrNone, hwGmacTraceTimeOut Integer32, hwGmacTraceOutIfIndex InterfaceIndexOrZero, hwGmactraceSendSeqNumber Unsigned32, hwGmacTraceEgressIdentifier OCTET STRING, hwGmacTraceResult TruthValue, hwGmacTraceVsiVid Integer32, hwGmacTraceIfType HWDot1agCfmIfType, hwGmacTraceRowStatus RowStatus } hwGmacTraceIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the Gmac Trace test case " ::= { hwGmacTraceEntry 1 } hwGmacTraceEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Start the Gmac Trace operation " ::= { hwGmacTraceEntry 11 } hwGmacTraceTimeStamp OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-create STATUS current DESCRIPTION " The time of starting the Gmac Trace " ::= { hwGmacTraceEntry 12 } hwGmacTraceMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " The destination MAC address of the Gmac Trace " ::= { hwGmacTraceEntry 13 } hwGmacTraceVlanVid OBJECT-TYPE SYNTAX VlanIdOrNone MAX-ACCESS read-create STATUS current DESCRIPTION " Identify that on which VLAN the Gmac Trace carries out the Trace operation. " ::= { hwGmacTraceEntry 14 } hwGmacTraceTimeOut OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION " The timeout time input by users is in ms, and the default value is 2000. " DEFVAL { 2000 } ::= { hwGmacTraceEntry 15 } hwGmacTraceOutIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION " Specify the outbound interface for the Gmac Trace operation. " DEFVAL { 0 } ::= { hwGmacTraceEntry 16 } hwGmactraceSendSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The sequence number of the packets sent by the Gmac Trace " ::= { hwGmacTraceEntry 17 } hwGmacTraceEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION " The EgressID field in the sent Gmac Trace packets " ::= { hwGmacTraceEntry 18 } hwGmacTraceResult OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Judge whether the Gmac Trace operation is complete based on the following tow conditions: Trace arrive at the destination or the timeout time ends. Either of the two previous conditions indicates that the Gmac Trace operation is complete. " ::= { hwGmacTraceEntry 19 } hwGmacTraceVsiVid OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION " Identify the source VSI of Gmac Trace. " ::= { hwGmacTraceEntry 20 } hwGmacTraceIfType OBJECT-TYPE SYNTAX HWDot1agCfmIfType MAX-ACCESS read-create STATUS current DESCRIPTION "Type of interfaces associated with Trace, 1:vlan, 2:vsi." ::= { hwGmacTraceEntry 21 } hwGmacTraceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated." ::= { hwGmacTraceEntry 51 } hwGmacTraceRespondTable OBJECT-TYPE SYNTAX SEQUENCE OF HwGmacTraceRespondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The results of the Gmac Trace " ::= { hwGmacObjects 5 } hwGmacTraceRespondEntry OBJECT-TYPE SYNTAX HwGmacTraceRespondEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the gmactrace table entry." INDEX { hwGmacTraceRespondSeqNumber, hwGmacTraceRespondReceiveOrder } ::= { hwGmacTraceRespondTable 1 } HwGmacTraceRespondEntry ::= SEQUENCE { hwGmacTraceRespondSeqNumber Unsigned32, hwGmacTraceRespondReceiveOrder Unsigned32, hwGmacTraceRespondTtl Unsigned32, hwGmacTraceRespondForwarded TruthValue, hwGmacTraceRespondLastEgressIdentifier OCTET STRING, hwGmacTraceRespondNextEgressIdentifier OCTET STRING, hwGmacTraceRespondRelay HWDot1agCfmRelayActionFieldValue, hwGmacTraceRespondIngress HWDot1agCfmIngressActionFieldValue, hwGmacTraceRespondIngressMac MacAddress, hwGmacTraceRespondIngressPortIdSubtype HWLldpPortIdSubtype, hwGmacTraceRespondIngressPortId HWLldpPortId, hwGmacTraceRespondEgress HWDot1agCfmEgressActionFieldValue, hwGmacTraceRespondEgressMac MacAddress, hwGmacTraceRespondEgressPortIdSubtype HWLldpPortIdSubtype, hwGmacTraceRespondEgressPortId HWLldpPortId } hwGmacTraceRespondSeqNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The sequence number carried by the sent Gmac Trace echo packets " REFERENCE "802.1ag clause 12.14.7.5" ::= { hwGmacTraceRespondEntry 1 } hwGmacTraceRespondReceiveOrder OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index value assigned internally. If a series of echo packets for the same Gmac Trace packet, the device differentiates these echo packets through the value pair. " ::= { hwGmacTraceRespondEntry 2 } hwGmacTraceRespondTtl OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION " The TTL field in this Gmac Trace echo packet " ::= { hwGmacTraceRespondEntry 11 } hwGmacTraceRespondForwarded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates whether the device that sends the echo packets continues to send the Gmac Trace packets " ::= { hwGmacTraceRespondEntry 12 } hwGmacTraceRespondLastEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION " The LastEgressIdentifier field in the Gmac Trace echo packet " ::= { hwGmacTraceRespondEntry 13 } hwGmacTraceRespondNextEgressIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (8)) MAX-ACCESS read-only STATUS current DESCRIPTION " The NextEgressIdentifier field in the Gmac Trace echo packet " ::= { hwGmacTraceRespondEntry 14 } hwGmacTraceRespondRelay OBJECT-TYPE SYNTAX HWDot1agCfmRelayActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the value in the Relay Action field." ::= { hwGmacTraceRespondEntry 15 } hwGmacTraceRespondIngress OBJECT-TYPE SYNTAX HWDot1agCfmIngressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION " The Ingress Action Field field in the Gmac Trace echo packet " ::= { hwGmacTraceRespondEntry 16 } hwGmacTraceRespondIngressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the ingress MAC address field." ::= { hwGmacTraceRespondEntry 17 } hwGmacTraceRespondIngressPortIdSubtype OBJECT-TYPE SYNTAX HWLldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the Ingress Port ID." ::= { hwGmacTraceRespondEntry 18 } hwGmacTraceRespondIngressPortId OBJECT-TYPE SYNTAX HWLldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Ingress Port ID." ::= { hwGmacTraceRespondEntry 19 } hwGmacTraceRespondEgress OBJECT-TYPE SYNTAX HWDot1agCfmEgressActionFieldValue MAX-ACCESS read-only STATUS current DESCRIPTION " The Egress Action Field field in the Gmac Trace echo packet. " ::= { hwGmacTraceRespondEntry 20 } hwGmacTraceRespondEgressMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "MAC address returned in the egress MAC address field." ::= { hwGmacTraceRespondEntry 21 } hwGmacTraceRespondEgressPortIdSubtype OBJECT-TYPE SYNTAX HWLldpPortIdSubtype MAX-ACCESS read-only STATUS current DESCRIPTION "Format of the egress Port ID." ::= { hwGmacTraceRespondEntry 22 } hwGmacTraceRespondEgressPortId OBJECT-TYPE SYNTAX HWLldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "Egress Port ID." ::= { hwGmacTraceRespondEntry 23 } hwEthOamTraps OBJECT IDENTIFIER ::= { hwEthOamMib 6 } -- ****************************************************************** -- NOTIFICATIONS (TRAPS) -- These notifications will be sent to the management entity -- whenever a MEP loses/restores contact with one or more other MEPs. -- ****************************************************************** hwCfmFaultAlarm NOTIFICATION-TYPE OBJECTS { hwDot1agCfmRMepMacAddress, hwDot1agCfmRMepHighestPrDefect, dot1agCfmMdName, dot1agCfmMdLevel, dot1agCfmMaName } STATUS current DESCRIPTION "A MEP has lost contact with one or more MEPs. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whenever a MEP loses contact with one or more other MEPs, it may or may not generate a Fault Alarm to warn the system administrator of the problem, as controlled by the MEP Fault Notification Generator State Machine and associated Managed Objects. Only the highest-priority defect, as shown in Table 20-1, is reported in the Fault Alarm. hwDot1agCfmRMepMacAddress The MAC address of the remote faulty MEP hwDot1agCfmRMepHighestPrDefect The fault in the highest level dot1agCfmMdName The name of the faulty MD dot1agCfmMdLevel The level of the faulty MD dot1agCfmMaName The name of the faulty MA " REFERENCE "802.1ag clause 12.14.7.7" ::= { hwEthOamTraps 1 } hwTestMessageFailed NOTIFICATION-TYPE OBJECTS { hwTestMessageSendFinished } STATUS current DESCRIPTION " The events after tests are reported. 1,2,3,4, and 5 indicate has not run/is running/the previous test terminates normally/the previous test terminate abnormally/the previous test is interrupted. (through ctrl+c or mib) " REFERENCE " " ::= { hwEthOamTraps 2 } hwTestMessageCompleted NOTIFICATION-TYPE OBJECTS { hwTestMessageSendFinished, hwTestMessageResultSendPackets, hwTestMessageResultReceivedPackets, hwTestMessageResultPacketsLost, hwTestMessageResultSendBytes, hwTestMessageResultReceivedBytes, hwTestMessageResultBytesLost, hwTestMessageBeginTimeStamp, hwTestMessageEndTimeStamp } STATUS current DESCRIPTION " After the test is complete, report the results to the network management. " REFERENCE " " ::= { hwEthOamTraps 3 } -- *************************************************************** -- -- Ethernet OAM Notifications -- hwDot3ahEfmThresholdEvent NOTIFICATION-TYPE OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation, hwDot3ahEfmEventLogWindowHi, hwDot3ahEfmEventLogWindowLo, hwDot3ahEfmEventLogThresholdHi, hwDot3ahEfmEventLogThresholdLo, hwDot3ahEfmEventLogValue, hwDot3ahEfmEventLogRunningTotal, hwDot3ahEfmEventLogEventTotal } STATUS current DESCRIPTION "A hwDot3ahEfmThresholdEvent notification is sent when a local or remote threshold crossing event is detected. A local threshold crossing event is detected by the local entity, while a remote threshold crossing event is detected by the reception of an Ethernet OAM Event Notification OAMPDU indicating a threshold event. This notification should not be sent more than once per second. The OAM entity can be derived from extracting the ifIndex from the variable bindings. The objects in the notification correspond to the values in a row instance of in the hwDot3ahEfmEventLogTable. The management entity should periodically check hwDot3ahEfmEventLogTable to detect any missed events." ::= { hwEthOamTraps 4 } hwDot3ahEfmNonThresholdEvent NOTIFICATION-TYPE OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation, hwDot3ahEfmEventLogEventTotal } STATUS current DESCRIPTION "A hwDot3ahEfmNonThresholdEvent notification is sent when a local or remote non-threshold crossing event is detected. A local event is detected by the local entity, while a remote event is detected by the reception of an Ethernet OAM Event Notification OAMPDU indicating a non-threshold crossing event. This notification should not be sent more than once per second. The OAM entity can be derived from extracting the ifIndex from the variable bindings. The objects in the notification correspond to the values in a row instance of the hwDot3ahEfmEventLogTable. The management entity should periodically check hwDot3ahEfmEventLogTable to detect any missed events." ::= { hwEthOamTraps 5 } hwEthOamConformance OBJECT IDENTIFIER ::= { hwEthOamMib 7 } hwEthOamCompliances OBJECT IDENTIFIER ::= { hwEthOamConformance 1 } hwEthOamCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the HUAWEI-ETHOAM-MIB" MODULE -- this module MANDATORY-GROUPS { hwDot1agCfmMdGroup, hwDot1agCfmMaGroup, hwDot1agCfmMepGroup, hwDot1agCfmRMepGroup, hwDot1agCfmMipGroup, hwDot3ahEfmDetectModeGroup, hwTestMessageGroup, hwTestMessageResultGroup, hwEthOamTrapsGroup, hwCfmGroup, hwGmacPingGroup, hwGmacTraceGroup, hwGmacTraceRespondGroup, hwDot3ahEfmControlGroup, hwDot3ahEfmPeerGroup, hwDot3ahEfmStatsBaseGroup, hwDot3ahEfmManagerGroup } OBJECT hwDot1agCfmRMepRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT hwDot1agCfmMipCreationTypeRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." OBJECT hwTestMessageRowStatus SYNTAX RowStatus { active(1), notInService(2) } WRITE-SYNTAX RowStatus { notInService(2), createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait is not required." GROUP hwDot3ahEfmLoopbackGroup DESCRIPTION "This group is mandatory for all IEEE 802.3 OAM implementations that support loopback functionality. " GROUP hwDot3ahEfmErrSymbolPeriodEventGroup DESCRIPTION "This group is mandatory for all IEEE 802.3 OAM implementations that support event functionality. " GROUP hwDot3ahEfmErrFramePeriodEventGroup DESCRIPTION "This group is mandatory for all IEEE 802.3 OAM implementations that support event functionality. " GROUP hwDot3ahEfmErrFrameEventGroup DESCRIPTION "This group is mandatory for all IEEE 802.3 OAM implementations that support event functionality. " GROUP hwDot3ahEfmErrFrameSecsSummaryEventGroup DESCRIPTION "This group is mandatory for all IEEE 802.3 OAM implementations that support event functionality. " GROUP hwDot3ahEfmFlagEventGroup DESCRIPTION "This group is optional for all IEEE 802.3 OAM implementations. The ability to send critical events or dying gasp events is not required in any system." GROUP hwDot3ahEfmEventLogGroup DESCRIPTION "This group is optional for all IEEE 802.3 OAM implementations. Entries in this table are dependent on what event functionality is supported in the local OAM implementation. At least one type of event must be supported for entries to appear in this table. " ::= { hwEthOamCompliances 1 } hwEthOamGroups OBJECT IDENTIFIER ::= { hwEthOamConformance 2 } hwDot1agCfmMdGroup OBJECT-GROUP OBJECTS { hwDot1agCfmMdErrMsgStatisticsEnabled, hwDot1agCfmMdErrorSmacStatistics, hwDot1agCfmMdErrorIntervalStatistics, hwDot1agCfmMdErrorMaIdStatistics } STATUS current DESCRIPTION "Objects for the hwDot1agCfmMd group." ::= { hwEthOamGroups 1 } hwDot1agCfmMaGroup OBJECT-GROUP OBJECTS { hwDot1agCfmMaCcmInterval, hwDot1agCcSendEnabled, hwDot1agCcReceiveEnabled, hwDot1agCfmMaErrMsgStatisticsEnabled, hwDot1agCfmPriority, hwDot1agCfmMaErrorSmacStatistics, hwDot1agCfmMaErrorIntervalStatistics, hwDot1agCfmMaErrorMaIdStatistics, hwDot1agCfmMaDetectMalfunction, hwDot1agCfmMaBindIfId, hwDot1agCfmMaUnBindIfId, hwDot1agCfmMaIfType } STATUS current DESCRIPTION "Objects for the hwDot1agCfmMa group." ::= { hwEthOamGroups 2 } hwDot1agCfmMepGroup OBJECT-GROUP OBJECTS { hwDot1agCfmCcmOutIfIndex, hwDot1agCfmLbmOutIfIndex, hwDot1agCfmLtmOutIfIndex, hwDot1agCfmLbmPacketSize } STATUS current DESCRIPTION "Objects for the hwDot1agCfmMep group." ::= { hwEthOamGroups 3 } hwDot1agCfmRMepGroup OBJECT-GROUP OBJECTS { hwDot1agCfmRMepMacAddress, hwDot1agCfmRMepCcReceiveEnabled, hwDot1agCfmRMepErrMsgStatisticsEnabled, hwDot1agCfmRMepHighestPrDefect, hwDot1agCfmRMepLowPrDef, hwDot1agCfmRMepSomeRMepCcmDefect, hwDot1agCfmRMepErrorCcmDefect, hwDot1agCfmRMepXconCcmDefect, hwDot1agCfmRMepSomeRdiDefect, hwDot1agCfmRMepErrMacStatus, hwDot1agCfmRMepFngAlarmTime, hwDot1agCfmRMepFngResetTime, hwDot1agCfmRMepErrorSmacStatistics, hwDot1agCfmRMepErrorIntervalStatistics, hwDot1agCfmRMepErrorMaIdStatistics, hwDot1agCfmRMepRowStatus } STATUS current DESCRIPTION "RMEP configuration group" ::= { hwEthOamGroups 4 } hwDot1agCfmMipGroup OBJECT-GROUP OBJECTS { hwDot1agCfmMipCreationType, hwDot1agCfmMipCreationTypeRowStatus, hwDot1agCfmMipLevel } STATUS current DESCRIPTION "MIP configuration group" ::= { hwEthOamGroups 5 } hwDot3ahEfmDetectModeGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmEnabled, hwDot3ahEfmDetectMode, hwDot3ahEfmDetectInterval, hwDot3ahEfmDetectMalfunction } STATUS current DESCRIPTION "Test mode group" ::= { hwEthOamGroups 6 } hwTestMessageGroup OBJECT-GROUP OBJECTS { hwTestMessageTableNextIndex, hwTestMessageInterface, hwTestMessageServiceInstance, hwTestMessageMacAddress, hwTestMessageVlanID, hwTestMessagePacketSize, hwTestMessageSendPackets, hwTestMessageSendSpeed, hwTestMessageSendEnabled, hwTestMessageSendFinished, hwTestMessageRowStatus } STATUS current DESCRIPTION "Test packets setting group" ::= { hwEthOamGroups 7 } hwTestMessageResultGroup OBJECT-GROUP OBJECTS { hwTestMessageResultSendPackets, hwTestMessageResultReceivedPackets, hwTestMessageResultPacketsLost, hwTestMessageResultSendBytes, hwTestMessageResultReceivedBytes, hwTestMessageResultBytesLost, hwTestMessageBeginTimeStamp, hwTestMessageEndTimeStamp } STATUS current DESCRIPTION "The group for the tested packets results to be returned." ::= { hwEthOamGroups 8 } hwEthOamTrapsGroup NOTIFICATION-GROUP NOTIFICATIONS { hwCfmFaultAlarm, hwTestMessageFailed, hwTestMessageCompleted, hwDot3ahEfmThresholdEvent, hwDot3ahEfmNonThresholdEvent } STATUS current DESCRIPTION "Objects for the Notifications group. A collection of notifications used by Ethernet OAM to signal to a management entity that local or remote events have occurred on a specified Ethernet link. This group is optional for all IEEE 802.3 OAM implementations. Since the information in the notifications is dependent on the hwDot3ahEfmEventLogTable, that table must be implemented for notifications." ::= { hwEthOamGroups 9 } hwCfmGroup OBJECT-GROUP OBJECTS { hwDot1agCfmEnabled, hwDot1agCfmErrMsgStatisticsEnabled, hwDot1agCfmMipCreation, hwDot1agCfmMacTunnelTraceResponseEnabled, hwDot1agCfmErrorSmacStatistics, hwDot1agCfmErrorIntervalStatistics, hwDot1agCfmErrorMaIdStatistics } STATUS current DESCRIPTION "Cfm enabling and statistics group" ::= { hwEthOamGroups 10 } hwGmacPingGroup OBJECT-GROUP OBJECTS { hwGmacPingEnabled, hwGmacPingEnable, hwGmacPingTimeStamp, hwGmacPingMacAddress, hwGmacPingVlanVid, hwGmacPingTimeOut, hwGmacPingTimes, hwGmacPingOutIfIndex, hwGmacPingSize, hwGmacPingRespondIn, hwGmacPingRTTMin, hwGmacPingRTTMax, hwGmacPingRTTAvg, hwGmacPingPacketLossRatio, hwGmacPingVsiVid, hwGmacPingIfType, hwGmacPingRowStatus } STATUS current DESCRIPTION "Gmac Ping starting and statistics group" ::= { hwEthOamGroups 11 } hwGmacTraceGroup OBJECT-GROUP OBJECTS { hwGmacTraceEnabled, hwGmacTraceEnable, hwGmacTraceTimeStamp, hwGmacTraceMacAddress, hwGmacTraceVlanVid, hwGmacTraceTimeOut, hwGmacTraceOutIfIndex, hwGmactraceSendSeqNumber, hwGmacTraceEgressIdentifier, hwGmacTraceResult, hwGmacTraceVsiVid, hwGmacTraceIfType, hwGmacTraceRowStatus } STATUS current DESCRIPTION "Gmac Trace starting and statistics group" ::= { hwEthOamGroups 12 } hwGmacTraceRespondGroup OBJECT-GROUP OBJECTS { hwGmacTraceRespondTtl, hwGmacTraceRespondForwarded, hwGmacTraceRespondLastEgressIdentifier, hwGmacTraceRespondNextEgressIdentifier, hwGmacTraceRespondRelay, hwGmacTraceRespondIngress, hwGmacTraceRespondIngressMac, hwGmacTraceRespondIngressPortIdSubtype, hwGmacTraceRespondIngressPortId, hwGmacTraceRespondEgress, hwGmacTraceRespondEgressMac, hwGmacTraceRespondEgressPortIdSubtype, hwGmacTraceRespondEgressPortId } STATUS current DESCRIPTION "Gmac Trace starting and statistics group" ::= { hwEthOamGroups 13 } hwDot3ahEfmControlGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmAdminState, hwDot3ahEfmOperStatus, hwDot3ahEfmMode, hwDot3ahEfmMaxOamPduSize, hwDot3ahEfmConfigRevision, hwDot3ahEfmFunctionsSupported } STATUS current DESCRIPTION "A collection of objects providing the abilities, configuration, and status of an Ethernet OAM entity. " ::= { hwEthOamGroups 14 } hwDot3ahEfmPeerGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmPeerMacAddress, hwDot3ahEfmPeerVendorOui, hwDot3ahEfmPeerVendorInfo, hwDot3ahEfmPeerMode, hwDot3ahEfmPeerFunctionsSupported, hwDot3ahEfmPeerMaxOamPduSize, hwDot3ahEfmPeerConfigRevision } STATUS current DESCRIPTION "A collection of objects providing the abilities, configuration, and status of a peer Ethernet OAM entity. " ::= { hwEthOamGroups 15 } hwDot3ahEfmStatsBaseGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmInformationTx, hwDot3ahEfmInformationRx, hwDot3ahEfmUniqueEventNotificationTx, hwDot3ahEfmUniqueEventNotificationRx, hwDot3ahEfmDuplicateEventNotificationTx, hwDot3ahEfmDuplicateEventNotificationRx, hwDot3ahEfmLoopbackControlTx, hwDot3ahEfmLoopbackControlRx, hwDot3ahEfmVariableRequestTx, hwDot3ahEfmVariableRequestRx, hwDot3ahEfmVariableResponseTx, hwDot3ahEfmVariableResponseRx, hwDot3ahEfmOrgSpecificTx, hwDot3ahEfmOrgSpecificRx, hwDot3ahEfmUnsupportedCodesTx, hwDot3ahEfmUnsupportedCodesRx, hwDot3ahEfmFramesLostDueToOam } STATUS current DESCRIPTION "A collection of objects providing the statistics for the number of various transmit and receive events for OAM on an Ethernet like interface. Note that all of these counters must be supported even if the related function (as described in hwDot3ahEfmFunctionsSupported) is not supported. " ::= { hwEthOamGroups 16 } hwDot3ahEfmLoopbackGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmLoopbackStatus, hwDot3ahEfmLoopbackIgnoreRx, hwDot3ahEfmLoopbackTimeout } STATUS current DESCRIPTION "A collection of objects for controlling the OAM remote loopback function. " ::= { hwEthOamGroups 17 } hwDot3ahEfmErrSymbolPeriodEventGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmErrSymPeriodWindowHi, hwDot3ahEfmErrSymPeriodWindowLo, hwDot3ahEfmErrSymPeriodThresholdHi, hwDot3ahEfmErrSymPeriodThresholdLo, hwDot3ahEfmErrSymPeriodEvNotifEnable } STATUS current DESCRIPTION "A collection of objects for configuring the thresholds for an Errored Symbol Period Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. " ::= { hwEthOamGroups 18 } hwDot3ahEfmErrFramePeriodEventGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmErrFramePeriodWindow, hwDot3ahEfmErrFramePeriodThreshold, hwDot3ahEfmErrFramePeriodEvNotifEnable } STATUS current DESCRIPTION "A collection of objects for configuring the thresholds for an Errored Frame Period Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. " ::= { hwEthOamGroups 19 } hwDot3ahEfmErrFrameEventGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmErrFrameWindow, hwDot3ahEfmErrFrameThreshold, hwDot3ahEfmErrFrameEvNotifEnable } STATUS current DESCRIPTION "A collection of objects for configuring the thresholds for an Errored Frame Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. " ::= { hwEthOamGroups 20 } hwDot3ahEfmErrFrameSecsSummaryEventGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmErrFrameSecsSummaryWindow, hwDot3ahEfmErrFrameSecsSummaryThreshold, hwDot3ahEfmErrFrameSecsEvNotifEnable } STATUS current DESCRIPTION "A collection of objects for configuring the thresholds for an Errored Frame Seconds Summary Event. Each [802.3ah] defined Event Notification TLV has its own conformance group because each event can be implemented independently of any other. " ::= { hwEthOamGroups 21 } hwDot3ahEfmFlagEventGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmDyingGaspEnable, hwDot3ahEfmCriticalEventEnable } STATUS current DESCRIPTION "A collection of objects for configuring the sending OAMPDUs with the critical event flag or dying gasp flag enabled. " ::= { hwEthOamGroups 22 } hwDot3ahEfmEventLogGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmEventLogTimestamp, hwDot3ahEfmEventLogOui, hwDot3ahEfmEventLogType, hwDot3ahEfmEventLogLocation, hwDot3ahEfmEventLogWindowHi, hwDot3ahEfmEventLogWindowLo, hwDot3ahEfmEventLogThresholdHi, hwDot3ahEfmEventLogThresholdLo, hwDot3ahEfmEventLogValue, hwDot3ahEfmEventLogRunningTotal, hwDot3ahEfmEventLogEventTotal } STATUS current DESCRIPTION "A collection of objects for configuring the thresholds for an Errored Frame Seconds Summary Event and maintaining the event information. " ::= { hwEthOamGroups 23 } hwDot3ahEfmManagerGroup OBJECT-GROUP OBJECTS { hwDot3ahEfmTriggerIfDown } STATUS current DESCRIPTION "hwDot3ahEfmManagerGroup " ::= { hwEthOamGroups 24 } hwDot3ahEvrrpGroup OBJECT-GROUP OBJECTS { hwDot3ahEvrrpCpuState, hwDot3ahEvrrpTriggerIfDown } STATUS current DESCRIPTION "A collection of objects for displaying and maintaining the infomation for Evrrp state. " ::= { hwEthOamGroups 25 } END