Files
librenms/mibs/huawei/HUAWEI-BGP-VPN
T
Adam Amstrong fea1d1ab80 add VRP. break some layout.
git-svn-id: http://www.observium.org/svn/observer/trunk@2567 61d68cd4-352d-0410-923a-c4978735b2b8
2011-09-23 15:20:11 +00:00

767 lines
26 KiB
Plaintext

-- ============================================================================
-- Copyright (C) 2008 by HUAWEI TECHNOLOGIES. All rights reserved.
--
-- Description: HUAWEI-BGP-VPN-MIB , this Mib module for management
-- of BGP/VPN protocol.
-- Reference: This MIB was extracted from RFC 4271
-- Version: V1.0
-- History:
-- Created by wangchong 102393 2008-12-28
--
-- ============================================================================
HUAWEI-BGP-VPN-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
Unsigned32, Gauge32, Counter32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
hwBgpMIB MODULE-IDENTITY
LAST-UPDATED "200812260955Z"
ORGANIZATION
"Huawei Technologies co.,Ltd"
CONTACT-INFO
"R&D BeiJing, Huawei Technologies co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com"
DESCRIPTION
"The Mib module for management of BGP/VPN. Huawei Technologies co.,Ltd.
Supplementary information may be available at:
http://www.huawei.com"
::= { hwDatacomm 177 }
--
-- Textual conventions
--
HWBgpAfi ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Address Family Identifier(AFI) for BGP peer."
SYNTAX INTEGER
{
ipv4(1),
ipv6(2),
vpls(25),
l2vpn(196)
}
HWBgpSafi ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Subsequent Address Family Identifier(SAFI) for BGP peer."
SYNTAX INTEGER
{
unicast(1),
multicast(2),
mpls(4),
vpls(65),
vpn(128)
}
hwBgpObjects OBJECT IDENTIFIER ::= { hwBgpMIB 1 }
hwBgpPeers OBJECT IDENTIFIER ::= { hwBgpObjects 1 }
-- BGP peer address family table
hwBgpPeerAddrFamilyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBgpPeerAddrFamilyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP Peer Address Family Table.
This table contains information about the address family for BGP peers."
::= { hwBgpPeers 1 }
hwBgpPeerAddrFamilyEntry OBJECT-TYPE
SYNTAX HwBgpPeerAddrFamilyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information about the address family for BGP peers."
INDEX {hwBgpPeerInstanceId, hwBgpPeerAddrFamilyAfi, hwBgpPeerAddrFamilySafi, hwBgpPeerType, hwBgpPeerIPAddr}
::= { hwBgpPeerAddrFamilyTable 1 }
HwBgpPeerAddrFamilyEntry ::=
SEQUENCE {
hwBgpPeerInstanceId
Unsigned32,
hwBgpPeerAddrFamilyAfi
HWBgpAfi,
hwBgpPeerAddrFamilySafi
HWBgpSafi,
hwBgpPeerType
InetAddressType,
hwBgpPeerIPAddr
InetAddress,
hwBgpPeerVrfName
OCTET STRING
}
hwBgpPeerInstanceId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the instance for the remote BGP peer."
::= { hwBgpPeerAddrFamilyEntry 1 }
hwBgpPeerAddrFamilyAfi OBJECT-TYPE
SYNTAX HWBgpAfi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the address family for the remote BGP peer."
::= { hwBgpPeerAddrFamilyEntry 2 }
hwBgpPeerAddrFamilySafi OBJECT-TYPE
SYNTAX HWBgpSafi
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the sub-address family for the remote peer."
::= { hwBgpPeerAddrFamilyEntry 3 }
hwBgpPeerType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address family for the remote BGP peer."
::= { hwBgpPeerAddrFamilyEntry 4 }
hwBgpPeerIPAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the remote BGP peer."
::= { hwBgpPeerAddrFamilyEntry 5 }
hwBgpPeerVrfName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the VPN instance."
::= { hwBgpPeerAddrFamilyEntry 6 }
-- BGP peer table
hwBgpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BGP Peer Table.
This table contains information about the connections for BGP peers."
::= { hwBgpPeers 2 }
hwBgpPeerEntry OBJECT-TYPE
SYNTAX HwBgpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information about the connections with BGP peers."
AUGMENTS { hwBgpPeerAddrFamilyEntry }
::= { hwBgpPeerTable 1 }
HwBgpPeerEntry ::=
SEQUENCE {
hwBgpPeerNegotiatedVersion
Unsigned32,
hwBgpPeerRemoteAs
Unsigned32,
hwBgpPeerRemoteAddr
InetAddress,
hwBgpPeerState
INTEGER,
hwBgpPeerFsmEstablishedCounter
Unsigned32,
hwBgpPeerFsmEstablishedTime
Gauge32
}
hwBgpPeerNegotiatedVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version negotiated with the remote BGP peer."
::= { hwBgpPeerEntry 1 }
hwBgpPeerRemoteAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AS number of the remote BGP peer."
::= { hwBgpPeerEntry 2 }
hwBgpPeerRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the remote BGP peer."
::= { hwBgpPeerEntry 4 }
hwBgpPeerState OBJECT-TYPE
SYNTAX INTEGER
{
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the remote BGP peer, including:
1: Idle(1)
2: Connect(2)
3: Active(3)
4: Opensent(4)
5: Openconfirm(5)
6: Established(6) "
::= { hwBgpPeerEntry 5 }
hwBgpPeerFsmEstablishedCounter OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Counter That Records the Times the Remote BGP Peer Is Correctly Connected
The counter is increased by one if the remote BGP peer is correctly connected once.
The counter could be set to zero."
::= { hwBgpPeerEntry 6 }
hwBgpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The counter that records the times the remote BGP peer is correctly connected."
::= { hwBgpPeerEntry 7 }
-- BGP peer route table
hwBgpPeerRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBgpPeerRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Route table for BGP Peers
This table contains routing information about the BGP peers."
::= { hwBgpPeers 3 }
hwBgpPeerRouteEntry OBJECT-TYPE
SYNTAX HwBgpPeerRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing information about the BGP peers."
AUGMENTS { hwBgpPeerAddrFamilyEntry }
::= { hwBgpPeerRouteTable 1 }
HwBgpPeerRouteEntry ::=
SEQUENCE {
hwBgpPeerPrefixRcvCounter
Counter32,
hwBgpPeerPrefixActiveCounter
Counter32,
hwBgpPeerPrefixAdvCounter
Counter32
}
hwBgpPeerPrefixRcvCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes received from the remote BGP peer."
::= { hwBgpPeerRouteEntry 1 }
hwBgpPeerPrefixActiveCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active prefixes received from the remote BGP peer."
::= { hwBgpPeerRouteEntry 2 }
hwBgpPeerPrefixAdvCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of prefixes sent to the remote BGP peer."
::= { hwBgpPeerRouteEntry 3 }
-- BGP peer message table
hwBgpPeerMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBgpPeerMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Protocol Packet Table for BGP Peers
This table contains information about the protocol packets of BGP peers."
::= { hwBgpPeers 4 }
hwBgpPeerMessageEntry OBJECT-TYPE
SYNTAX HwBgpPeerMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information about the protocol packets of the BGP peers."
AUGMENTS { hwBgpPeerAddrFamilyEntry }
::= { hwBgpPeerMessageTable 1 }
HwBgpPeerMessageEntry ::=
SEQUENCE {
hwBgpPeerInTotalMsgCounter
Counter32,
hwBgpPeerOutTotalMsgCounter
Counter32,
hwBgpPeerInOpenMsgCounter
Counter32,
hwBgpPeerInUpdateMsgCounter
Counter32,
hwBgpPeerInNotificationMsgCounter
Counter32,
hwBgpPeerInKeepAliveMsgCounter
Counter32,
hwBgpPeerInRouteFreshMsgCounter
Counter32,
hwBgpPeerOutOpenMsgCounter
Counter32,
hwBgpPeerOutUpdateMsgCounter
Counter32,
hwBgpPeerOutNotificationMsgCounter
Counter32,
hwBgpPeerOutKeepAliveMsgCounter
Counter32,
hwBgpPeerOutRouteFreshMsgCounter
Counter32
}
hwBgpPeerInTotalMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of protocol packets received from the remote BGP peer."
::= { hwBgpPeerMessageEntry 1 }
hwBgpPeerOutTotalMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of protocol packets sent to the remote BGP peer."
::= { hwBgpPeerMessageEntry 2 }
hwBgpPeerInOpenMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Open packets received from the remote BGP peer."
::= { hwBgpPeerMessageEntry 3 }
hwBgpPeerInUpdateMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Update packets received from the remote BGP peer."
::= { hwBgpPeerMessageEntry 4 }
hwBgpPeerInNotificationMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Notification packets received from the remote BGP peer."
::= { hwBgpPeerMessageEntry 5 }
hwBgpPeerInKeepAliveMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Keepalive packets received from the remote BGP peer."
::= { hwBgpPeerMessageEntry 6 }
hwBgpPeerInRouteFreshMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Route-Refresh packets received from the remote BGP peer."
::= { hwBgpPeerMessageEntry 7 }
hwBgpPeerOutOpenMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Open packets sent to the remote BGP peer."
::= { hwBgpPeerMessageEntry 8 }
hwBgpPeerOutUpdateMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Update packets sent to the remote BGP peer."
::= { hwBgpPeerMessageEntry 9 }
hwBgpPeerOutNotificationMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Notification packets sent to the remote BGP peer."
::= { hwBgpPeerMessageEntry 10 }
hwBgpPeerOutKeepAliveMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Keepalive packets sent to the remote BGP peer."
::= { hwBgpPeerMessageEntry 11 }
hwBgpPeerOutRouteFreshMsgCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Route-Refresh packets sent to the remote BGP peer."
::= { hwBgpPeerMessageEntry 12 }
hwBgpRoute OBJECT IDENTIFIER ::= { hwBgpObjects 2 }
hwBgpVpnObjects OBJECT IDENTIFIER ::= { hwBgpMIB 2 }
hwBgpConformance OBJECT IDENTIFIER ::= { hwBgpMIB 3 }
hwBgpVpnConformance OBJECT IDENTIFIER ::= { hwBgpMIB 4 }
hwBgpCompliances OBJECT IDENTIFIER ::= { hwBgpConformance 1 }
hwBgpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Huawei-BGP-VPN MIB"
MODULE
MANDATORY-GROUPS { hwBgpPeer, hwBgpPeerRoute, hwBgpPeerMessage }
::= { hwBgpCompliances 1 }
hwBgpGroups OBJECT IDENTIFIER ::= { hwBgpConformance 2 }
hwBgpPeerAddrFamily OBJECT-GROUP
OBJECTS { hwBgpPeerVrfName }
STATUS current
DESCRIPTION
"Address Family Group for BGP peers
This table contains members of the address family for BGP peers"
::= { hwBgpGroups 1 }
hwBgpPeer OBJECT-GROUP
OBJECTS { hwBgpPeerNegotiatedVersion, hwBgpPeerRemoteAs, hwBgpPeerRemoteAddr, hwBgpPeerState, hwBgpPeerFsmEstablishedCounter,
hwBgpPeerFsmEstablishedTime }
STATUS current
DESCRIPTION
"BGP Peer Group.
This table contains members of the connections with BGP peers."
::= { hwBgpGroups 2 }
hwBgpPeerRoute OBJECT-GROUP
OBJECTS { hwBgpPeerPrefixRcvCounter, hwBgpPeerPrefixActiveCounter, hwBgpPeerPrefixAdvCounter }
STATUS current
DESCRIPTION
"Route Group for BGP Peers
This table contains members of the routes with BGP peers."
::= { hwBgpGroups 3 }
hwBgpPeerMessage OBJECT-GROUP
OBJECTS { hwBgpPeerInTotalMsgCounter, hwBgpPeerOutTotalMsgCounter, hwBgpPeerInOpenMsgCounter, hwBgpPeerInUpdateMsgCounter, hwBgpPeerInNotificationMsgCounter,
hwBgpPeerInKeepAliveMsgCounter, hwBgpPeerInRouteFreshMsgCounter, hwBgpPeerOutOpenMsgCounter, hwBgpPeerOutUpdateMsgCounter, hwBgpPeerOutNotificationMsgCounter,
hwBgpPeerOutKeepAliveMsgCounter, hwBgpPeerOutRouteFreshMsgCounter }
STATUS current
DESCRIPTION
"Protocol Packet Group for BGP Peers
This table contains members of the protocol packets with BGP peers."
::= { hwBgpGroups 4 }
hwBgpVpnTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwBgpVpnTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VPN-tunnel bearing relation table that shows detailed information about the tunnel that bears the VPN service."
::= { hwBgpVpnObjects 1 }
hwBgpVpnTunnelEntry OBJECT-TYPE
SYNTAX HwBgpVpnTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates detailed information about the tunnel bearing VPN services. This object can be queried, but not be set or created."
INDEX { hwBgpVpnTunnelVrfName, hwBgpVpnTunnelPublicNetNextHop, hwBgpVpnTunnelId }
::= { hwBgpVpnTunnelTable 1 }
HwBgpVpnTunnelEntry ::=
SEQUENCE {
hwBgpVpnTunnelVrfName
OCTET STRING,
hwBgpVpnTunnelPublicNetNextHop
IpAddress,
hwBgpVpnTunnelId
Unsigned32,
hwBgpVpnTunnelDestAddr
IpAddress,
hwBgpVpnTunnelType
Unsigned32,
hwBgpVpnTunnelSrcAddr
IpAddress,
hwBgpVpnTunnelOutIfName
OCTET STRING,
hwBgpVpnTunnelIsLoadBalance
Unsigned32,
hwBgpVpnTunnelLspIndex
Unsigned32,
hwBgpVpnTunnelLspOutIfName
OCTET STRING,
hwBgpVpnTunnelLspOutLabel
Unsigned32,
hwBgpVpnTunnelLspNextHop
IpAddress,
hwBgpVpnTunnelLspFec
IpAddress,
hwBgpVpnTunnelLspFecPfxLen
IpAddress,
hwBgpVpnTunnelLspIsBackup
Unsigned32
}
hwBgpVpnTunnelVrfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the VRF name."
::= { hwBgpVpnTunnelEntry 1 }
hwBgpVpnTunnelPublicNetNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the next hop in the public network."
::= { hwBgpVpnTunnelEntry 2 }
hwBgpVpnTunnelId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object identifies the tunnel ID."
::= { hwBgpVpnTunnelEntry 3 }
hwBgpVpnTunnelDestAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the destination address of the tunnel."
::= { hwBgpVpnTunnelEntry 4 }
hwBgpVpnTunnelType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the tunnel type."
::= { hwBgpVpnTunnelEntry 5 }
hwBgpVpnTunnelSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source address of the tunnel."
::= { hwBgpVpnTunnelEntry 6 }
hwBgpVpnTunnelOutIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the outgoing interface for the tunnel."
::= { hwBgpVpnTunnelEntry 7 }
hwBgpVpnTunnelIsLoadBalance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies whether load balancing is performed."
::= { hwBgpVpnTunnelEntry 8 }
hwBgpVpnTunnelLspIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the index of the primary LSP for the tunnel."
::= { hwBgpVpnTunnelEntry 9 }
hwBgpVpnTunnelLspOutIfName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the name of the outgoing interface for the primary LSP of the tunnel."
::= { hwBgpVpnTunnelEntry 10 }
hwBgpVpnTunnelLspOutLabel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the outgoing label for the primary LSP of the tunnel."
::= { hwBgpVpnTunnelEntry 11 }
hwBgpVpnTunnelLspNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the next hop for the primary LSP of the tunnel."
::= { hwBgpVpnTunnelEntry 12 }
hwBgpVpnTunnelLspFec OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the FEC for the primary LSP of the tunnel."
::= { hwBgpVpnTunnelEntry 13 }
hwBgpVpnTunnelLspFecPfxLen OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the length of the FEC for the primary LSP of the tunnel."
::= { hwBgpVpnTunnelEntry 14 }
hwBgpVpnTunnelLspIsBackup OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies whether the LSP is the backup LSP."
::= { hwBgpVpnTunnelEntry 15 }
hwBgpVpnCompliances OBJECT IDENTIFIER ::= { hwBgpVpnConformance 2 }
hwBgpVpnCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Route Management MIB."
MODULE HUAWEI-BGP-VPN-MIB
MANDATORY-GROUPS { hwBgpVpnTunnelGroup }
::= { hwBgpVpnCompliances 1 }
hwBgpVpnExtGroups OBJECT IDENTIFIER ::= { hwBgpVpnConformance 3 }
hwBgpVpnTunnelGroup OBJECT-GROUP
OBJECTS { hwBgpVpnTunnelDestAddr, hwBgpVpnTunnelType, hwBgpVpnTunnelSrcAddr, hwBgpVpnTunnelIsLoadBalance, hwBgpVpnTunnelLspIndex,
hwBgpVpnTunnelLspOutLabel, hwBgpVpnTunnelLspNextHop, hwBgpVpnTunnelLspFec,
hwBgpVpnTunnelLspFecPfxLen, hwBgpVpnTunnelOutIfName, hwBgpVpnTunnelLspOutIfName,
hwBgpVpnTunnelLspIsBackup }
STATUS current
DESCRIPTION
"Description."
::= { hwBgpVpnExtGroups 5 }
END