Fixes#9872, originally merged in #9956.
To upgrade to python3.12 as 3.8 is reaching EOL, we need to upgrade the core snap that certbot is based on. The latest version is core24, so we're going with that for longevity. We will want to notify third party snaps to make changes as well. They can release their snaps to a version higher than certbot's, and their users will not be upgraded until the matching (or greater) version of certbot is released. They should do this as otherwise including these changes will break their plugins.
Key documents for this migration are https://snapcraft.io/docs/migrate-core22 and https://snapcraft.io/docs/migrate-core24. The discussion at https://forum.snapcraft.io/t/upgrading-classic-snap-to-core24-using-snapcraft-8-3-causes-python-3-12-errors-at-runtime/ is also relevant to understanding some changes, which may become unnecessary in future versions of snapcraft.
* Migrate primary certbot snap to core24 and python 3.12
* Migrate plugin snaps to core24 and python 3.12
* Migrate to core24 in build_remote
* Run snap tests using python 3.12
* Unstage pyvenv.cfg and set PYTHONPATH
---------
Co-authored-by: Erica Portnoy <ebportnoy@gmail.com>
Co-authored-by: Erica Portnoy <erica@eff.org>
Fixes#8409.
Change the line in the README to allow `sudo /snap/bin/lxd.migrate -yes` to fail (for example, if there's nothing to migrate), but the whole command to succeed.
I tested this on a clean Focal install and confirmed it works.
This PR adds the following documentation improvements to fix https://github.com/certbot/certbot/issues/7958:
- Simplify building external plugins
- Separate out certbot snap instructions from plugin instructions
- Mention that dnsimple is just an example for the plugin instructions
- Mention remote build for other architectures
- Mention snap doc exists elsewhere in developer guide (`contributing.rst`)
* Set up generate_dnsplugins_all.sh for all files and parametrize snapcraft and postrefreshhook files
* Create constraints file in the generate_dnsplugins_all script
* Separate out plugin and certbot snaps and update instructions
* Add remote build instructions
* Add pointers to the README to contributing.rst
Fixes#7863.
Connect command is `sudo snap connect certbot-dns-dnsimple:certbot-metadata certbot:certbot-metadata`
Logs are `cat /var/snap/certbot-dns-dnsimple/current/debuglog`
Echos in hook are only printed to terminal when it exits 0; otherwise, check logs in `debuglog` mentioned above.
Manual tests include all iterations of connected, unconnected, installed for the first, second time, etc, with passing and failing version checks.
* Make dnsimple not update if certbot is too old
* create an interface to read cb version
* add missing newline
* fix syntax
* trying to figure out the consumer syntax
* trying to figure out the consumer syntax, again
* only check post first install
* valid setting name
* test for first install differently
* snapctl doesn't error if it fails I guess
* time to do some print debugging
* continue playing with syntax
* once again, fooled by bash int vs string comparisons!
* debugging
* if we use post and pre together we can do this
* is this how content interface syntax works
* it's a directory?
* more debug
* what's that error message again?
* try other syntax
* if it's not documented just guess at syntax
* actually, I think this is the syntax
* oops didn't set for new hook
* test passing information along connection
* interface attributes can only be set during the execution of prepare hooks
* just do it with main connection
* undo last few test changes
* Add some printing to make sure we understand what's going on
* create empty directory to bind to
* put mkdir in the correct part
* let's inspect the environment
* it can't run bash directly.
* perhaps only directories can be shared via the contente interface
* update name of folder
* echo to debug log to understand what's going on exactly. we have file access though!
* update grep for new file
* more printing
* echo to the debug log
* ok NOW all print statements are going to the log
* why does echo need two >s
* remove unnecessary extra check, just check if the init file is available
* check if certbot version will be available post-refresh after all
* pre-refresh hook is not necessary to get certbot version
* update mkdir so we don't have to clean each time
* try comparing version numbers in python
* it's python3
* we need different prints for if we succeed or if we fail.
* improve bash syntax
* remove some debugging code
* Remove debug script
* remove spaces for clarity
* consolidate parts and remove more test code
* s/certbot-version/certbot-metadata/g
* use sys.exit instead of exit
* find and save certbot version on the certbot side
* change presence test to new file
* switch to using packaging.version.parse instead of LooseVersion
* switch to requiring certbot version >= plugin version
* add plugin snap changes to generate script
* Add comment to generation file saying not to edit generated files manually
* Create post-refresh hook for all plugins with script
* generate files using new script
* update snapcraft.yaml files for plugins
* bin/sh comes first
* Add packaging to install_requires
* Check that refresh is allowed in integration test
* switch plug and slot names in integration test
* Update tools/generate_dnsplugins_postrefreshhook.sh
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* small bash fixes
* Update snap readme with new instructions
* Run tools/generate_dnsplugins_postrefreshhook.sh
* Update tools/snap/generate_dnsplugins_postrefreshhook.sh
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
Fixes#8041
This PR makes Azure Pipeline build the DNS plugins snaps for the 3 architectures during the CI.
It leverages the existing logic for building the Certbot snap in order to deploy a QEMU environment with Docker, and leverages the local PyPI index to speed up the build when installing `cffi` and `cryptography`.
All DNS plugins snaps are constructed in one unique docker container, in order to save the time required to install the system dependencies upon first start of `snapcraft`, and so speed up significantly the build.
Finally, all `amd64` DNS plugins snaps are built within 6 minutes. For `arm64` and `armhf`, it is around 40 mins: this is quite fast in fact, considering that 14 DNS plugins snaps are built.
However, this is still an extremely heavy task to make the full 3 architectures builds, even for Azure Pipelines and its 10 parallel jobs capability. That is why I make the `arm64` and `armhf` builds be skipped for the `full-test-suite`, and let them run only for `nightly` and `release`. This means however that these builds will not be done for the release branches. If this is a problem, I can put a more elaborate suspend condition to triggers the builds in this case.
All snaps are stored in the pipeline artifacts storage, making them available for publication during a `release` pipeline.
The PR is set as Draft for now, because I use temporarily `pr_test-suite` to validate the packaging jobs when commits are pushed. Once the PR is ready, I will revert it back to the normal configuration (run the standard tests).
* Configure a script to build DNS snaps
* Focus on packaging
* Trigger all architectures
* Add extra index
* Prepare conditional suspend
* Set final suspend logic
* Set final suspend value
* Loop for publication
* Use python3
* Clean before build
* Add a test
* Add test job in Azure
* Preserve env
* Apply normal config for pipelines
* Skip QEMU jobs only for test branches
* Makes snap run tests depends also on the Certbot snap build
* Update .azure-pipelines/templates/jobs/packaging-jobs.yml
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Update .azure-pipelines/templates/stages/deploy-stage.yml
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* More accurate way to get the plugin snap name
* Integrate DNS snap tests into certbot-ci
* Fixes
* Update certbot-ci/snap_integration_tests/conftest.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Update certbot-ci/snap_integration_tests/conftest.py
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
* Clean an _init_.py file
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
