diff --git a/acme/MANIFEST.in b/acme/MANIFEST.in index ec2b09e05..a452d60d4 100644 --- a/acme/MANIFEST.in +++ b/acme/MANIFEST.in @@ -1,3 +1,4 @@ include LICENSE.txt include README.rst +recursive-include docs * recursive-include acme/testdata * diff --git a/acme/README.rst b/acme/README.rst index e3ca8b738..4b6ea818c 100644 --- a/acme/README.rst +++ b/acme/README.rst @@ -1 +1 @@ -ACME protocol implementation for Python +ACME protocol implementation in Python diff --git a/acme/docs/.gitignore b/acme/docs/.gitignore new file mode 100644 index 000000000..ba65b13af --- /dev/null +++ b/acme/docs/.gitignore @@ -0,0 +1 @@ +/_build/ diff --git a/acme/docs/Makefile b/acme/docs/Makefile new file mode 100644 index 000000000..79de9c0a3 --- /dev/null +++ b/acme/docs/Makefile @@ -0,0 +1,192 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " applehelp to make an Apple Help Book" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + @echo " coverage to run coverage check of the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/acme-python.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/acme-python.qhc" + +applehelp: + $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp + @echo + @echo "Build finished. The help book is in $(BUILDDIR)/applehelp." + @echo "N.B. You won't be able to view it unless you put it in" \ + "~/Library/Documentation/Help or install it in your application" \ + "bundle." + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/acme-python" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/acme-python" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +coverage: + $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage + @echo "Testing of coverage in the sources finished, look at the " \ + "results in $(BUILDDIR)/coverage/python.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/acme/docs/_static/.gitignore b/acme/docs/_static/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/acme/docs/_templates/.gitignore b/acme/docs/_templates/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/acme/docs/api.rst b/acme/docs/api.rst new file mode 100644 index 000000000..c874d8470 --- /dev/null +++ b/acme/docs/api.rst @@ -0,0 +1,8 @@ +================= +API Documentation +================= + +.. toctree:: + :glob: + + api/* diff --git a/acme/docs/api/challenges.rst b/acme/docs/api/challenges.rst new file mode 100644 index 000000000..7bc084fe9 --- /dev/null +++ b/acme/docs/api/challenges.rst @@ -0,0 +1,5 @@ +Challenges +---------- + +.. automodule:: acme.challenges + :members: diff --git a/acme/docs/api/client.rst b/acme/docs/api/client.rst new file mode 100644 index 000000000..d0ab89eb2 --- /dev/null +++ b/acme/docs/api/client.rst @@ -0,0 +1,5 @@ +Client +------ + +.. automodule:: acme.client + :members: diff --git a/acme/docs/api/errors.rst b/acme/docs/api/errors.rst new file mode 100644 index 000000000..644ff0e71 --- /dev/null +++ b/acme/docs/api/errors.rst @@ -0,0 +1,5 @@ +Errors +------ + +.. automodule:: acme.errors + :members: diff --git a/acme/docs/api/fields.rst b/acme/docs/api/fields.rst new file mode 100644 index 000000000..c224f7fef --- /dev/null +++ b/acme/docs/api/fields.rst @@ -0,0 +1,5 @@ +Fields +------ + +.. automodule:: acme.fields + :members: diff --git a/acme/docs/api/jose.rst b/acme/docs/api/jose.rst new file mode 100644 index 000000000..0f7dd627c --- /dev/null +++ b/acme/docs/api/jose.rst @@ -0,0 +1,10 @@ +JOSE +---- + +.. automodule:: acme.jose + :members: + +.. toctree:: + :glob: + + jose/* diff --git a/acme/docs/api/jose/base64.rst b/acme/docs/api/jose/base64.rst new file mode 100644 index 000000000..a40f8b11b --- /dev/null +++ b/acme/docs/api/jose/base64.rst @@ -0,0 +1,5 @@ +JOSE Base64 +----------- + +.. automodule:: acme.jose.b64 + :members: diff --git a/acme/docs/api/jose/errors.rst b/acme/docs/api/jose/errors.rst new file mode 100644 index 000000000..60d9b5c78 --- /dev/null +++ b/acme/docs/api/jose/errors.rst @@ -0,0 +1,5 @@ +Errors +------ + +.. automodule:: acme.jose.errors + :members: diff --git a/acme/docs/api/jose/interfaces.rst b/acme/docs/api/jose/interfaces.rst new file mode 100644 index 000000000..7b72b364f --- /dev/null +++ b/acme/docs/api/jose/interfaces.rst @@ -0,0 +1,5 @@ +Interfaces +---------- + +.. automodule:: acme.jose.interfaces + :members: diff --git a/acme/docs/api/jose/json_util.rst b/acme/docs/api/jose/json_util.rst new file mode 100644 index 000000000..f06edead2 --- /dev/null +++ b/acme/docs/api/jose/json_util.rst @@ -0,0 +1,5 @@ +JSON utilities +-------------- + +.. automodule:: acme.jose.json_util + :members: diff --git a/acme/docs/api/jose/jwa.rst b/acme/docs/api/jose/jwa.rst new file mode 100644 index 000000000..c858a5d1d --- /dev/null +++ b/acme/docs/api/jose/jwa.rst @@ -0,0 +1,5 @@ +JSON Web Algorithms +------------------- + +.. automodule:: acme.jose.jwa + :members: diff --git a/acme/docs/api/jose/jwk.rst b/acme/docs/api/jose/jwk.rst new file mode 100644 index 000000000..8e6bbe13f --- /dev/null +++ b/acme/docs/api/jose/jwk.rst @@ -0,0 +1,5 @@ +JSON Web Key +------------ + +.. automodule:: acme.jose.jwk + :members: diff --git a/acme/docs/api/jose/jws.rst b/acme/docs/api/jose/jws.rst new file mode 100644 index 000000000..15335bf8f --- /dev/null +++ b/acme/docs/api/jose/jws.rst @@ -0,0 +1,5 @@ +JSON Web Signature +------------------ + +.. automodule:: acme.jose.jws + :members: diff --git a/acme/docs/api/jose/util.rst b/acme/docs/api/jose/util.rst new file mode 100644 index 000000000..41cbbcc31 --- /dev/null +++ b/acme/docs/api/jose/util.rst @@ -0,0 +1,5 @@ +Utilities +--------- + +.. automodule:: acme.jose.util + :members: diff --git a/acme/docs/api/messages.rst b/acme/docs/api/messages.rst new file mode 100644 index 000000000..0374a72c8 --- /dev/null +++ b/acme/docs/api/messages.rst @@ -0,0 +1,5 @@ +Messages +-------- + +.. automodule:: acme.messages + :members: diff --git a/acme/docs/api/other.rst b/acme/docs/api/other.rst new file mode 100644 index 000000000..eb27a5d53 --- /dev/null +++ b/acme/docs/api/other.rst @@ -0,0 +1,5 @@ +Other ACME objects +------------------ + +.. automodule:: acme.other + :members: diff --git a/acme/docs/api/standalone.rst b/acme/docs/api/standalone.rst new file mode 100644 index 000000000..a65e5df2a --- /dev/null +++ b/acme/docs/api/standalone.rst @@ -0,0 +1,5 @@ +Standalone +---------- + +.. automodule:: acme.standalone + :members: diff --git a/acme/docs/conf.py b/acme/docs/conf.py new file mode 100644 index 000000000..1448aaea3 --- /dev/null +++ b/acme/docs/conf.py @@ -0,0 +1,312 @@ +# -*- coding: utf-8 -*- +# +# acme-python documentation build configuration file, created by +# sphinx-quickstart on Sun Oct 18 13:38:06 2015. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os +import shlex + + +here = os.path.abspath(os.path.dirname(__file__)) + + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath(os.path.join(here, '..'))) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'sphinx.ext.intersphinx', + 'sphinx.ext.todo', + 'sphinx.ext.coverage', + 'sphinx.ext.viewcode', + 'sphinxcontrib.programoutput', +] + +autodoc_member_order = 'bysource' +autodoc_default_flags = ['show-inheritance', 'private-members'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix(es) of source filenames. +# You can specify multiple suffix as a list of string: +# source_suffix = ['.rst', '.md'] +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'acme-python' +copyright = u'2015-2015, Let\'s Encrypt Project' +author = u'Let\'s Encrypt Project' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0' +# The full version, including alpha/beta/rc tags. +release = '0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = 'en' + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +default_role = 'py:obj' + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = True + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. + +# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs +# on_rtd is whether we are on readthedocs.org +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' +if not on_rtd: # only import and set the theme if we're building docs locally + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] +# otherwise, readthedocs.org uses their theme by default, so no need to specify it + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Language to be used for generating the HTML full-text search index. +# Sphinx supports the following languages: +# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja' +# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr' +#html_search_language = 'en' + +# A dictionary with options for the search language support, empty by default. +# Now only 'ja' uses this config value +#html_search_options = {'type': 'default'} + +# The name of a javascript file (relative to the configuration directory) that +# implements a search results scorer. If empty, the default will be used. +#html_search_scorer = 'scorer.js' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'acme-pythondoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', + +# Latex figure (float) alignment +#'figure_align': 'htbp', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + (master_doc, 'acme-python.tex', u'acme-python Documentation', + u'Let\'s Encrypt Project', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'acme-python', u'acme-python Documentation', + [author], 1), + ('man/jws', 'jws', u'jws script documentation', [project], 1), +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'acme-python', u'acme-python Documentation', + author, 'acme-python', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False + + +intersphinx_mapping = { + 'python': ('https://docs.python.org/', None), +} diff --git a/acme/docs/index.rst b/acme/docs/index.rst new file mode 100644 index 000000000..8d298054e --- /dev/null +++ b/acme/docs/index.rst @@ -0,0 +1,26 @@ +.. acme-python documentation master file, created by + sphinx-quickstart on Sun Oct 18 13:38:06 2015. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to acme-python's documentation! +======================================= + +Contents: + +.. toctree:: + :maxdepth: 2 + + api + +.. automodule:: acme + :members: + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + diff --git a/acme/docs/make.bat b/acme/docs/make.bat new file mode 100644 index 000000000..781185977 --- /dev/null +++ b/acme/docs/make.bat @@ -0,0 +1,263 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=_build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . +set I18NSPHINXOPTS=%SPHINXOPTS% . +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. xml to make Docutils-native XML files + echo. pseudoxml to make pseudoxml-XML files for display purposes + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + echo. coverage to run coverage check of the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + + +REM Check if sphinx-build is available and fallback to Python version if any +%SPHINXBUILD% 2> nul +if errorlevel 9009 goto sphinx_python +goto sphinx_ok + +:sphinx_python + +set SPHINXBUILD=python -m sphinx.__init__ +%SPHINXBUILD% 2> nul +if errorlevel 9009 ( + echo. + echo.The 'sphinx-build' command was not found. Make sure you have Sphinx + echo.installed, then set the SPHINXBUILD environment variable to point + echo.to the full path of the 'sphinx-build' executable. Alternatively you + echo.may add the Sphinx directory to PATH. + echo. + echo.If you don't have Sphinx installed, grab it from + echo.http://sphinx-doc.org/ + exit /b 1 +) + +:sphinx_ok + + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\acme-python.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\acme-python.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdf" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdfja" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf-ja + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +if "%1" == "coverage" ( + %SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage + if errorlevel 1 exit /b 1 + echo. + echo.Testing of coverage in the sources finished, look at the ^ +results in %BUILDDIR%/coverage/python.txt. + goto end +) + +if "%1" == "xml" ( + %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The XML files are in %BUILDDIR%/xml. + goto end +) + +if "%1" == "pseudoxml" ( + %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. + goto end +) + +:end diff --git a/docs/man/jws.rst b/acme/docs/man/jws.rst similarity index 100% rename from docs/man/jws.rst rename to acme/docs/man/jws.rst diff --git a/acme/readthedocs.org.requirements.txt b/acme/readthedocs.org.requirements.txt new file mode 100644 index 000000000..65e6c7cf3 --- /dev/null +++ b/acme/readthedocs.org.requirements.txt @@ -0,0 +1,10 @@ +# readthedocs.org gives no way to change the install command to "pip +# install -e .[docs]" (that would in turn install documentation +# dependencies), but it allows to specify a requirements.txt file at +# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259) + +# Although ReadTheDocs certainly doesn't need to install the project +# in --editable mode (-e), just "pip install .[docs]" does not work as +# expected and "pip install -e .[docs]" must be used instead + +-e acme[docs] diff --git a/acme/setup.py b/acme/setup.py index 6448b7fe9..59c07d5c8 100644 --- a/acme/setup.py +++ b/acme/setup.py @@ -32,6 +32,12 @@ if sys.version_info < (2, 7): else: install_requires.append('mock') +docs_extras = [ + 'Sphinx>=1.0', # autodoc_member_order = 'bysource', autodoc_default_flags + 'sphinx_rtd_theme', + 'sphinxcontrib-programoutput', +] + testing_extras = [ 'nose', 'tox', @@ -41,7 +47,7 @@ testing_extras = [ setup( name='acme', version=version, - description='ACME protocol implementation', + description='ACME protocol implementation in Python', url='https://github.com/letsencrypt/letsencrypt', author="Let's Encrypt Project", author_email='client-dev@letsencrypt.org', @@ -61,6 +67,7 @@ setup( include_package_data=True, install_requires=install_requires, extras_require={ + 'docs': docs_extras, 'testing': testing_extras, }, entry_points={ diff --git a/docs/.gitignore b/docs/.gitignore index 69fa449dd..ba65b13af 100644 --- a/docs/.gitignore +++ b/docs/.gitignore @@ -1 +1 @@ -_build/ +/_build/ diff --git a/docs/conf.py b/docs/conf.py index e2b360a6e..124f0f9ad 100644 --- a/docs/conf.py +++ b/docs/conf.py @@ -17,13 +17,6 @@ import os import re import sys -import mock - - -# http://docs.readthedocs.org/en/latest/faq.html#i-get-import-errors-on-libraries-that-depend-on-c-modules -# c.f. #262 -sys.modules.update( - (mod_name, mock.MagicMock()) for mod_name in ['augeas']) here = os.path.abspath(os.path.dirname(__file__)) @@ -36,13 +29,11 @@ with codecs.open(init_fn, encoding='utf8') as fd: # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. sys.path.insert(0, os.path.abspath(os.path.join(here, '..'))) -for pkg in 'acme', 'letsencrypt-apache', 'letsencrypt-nginx': - sys.path.insert(0, os.path.abspath(os.path.join(here, '..', pkg))) # -- General configuration ------------------------------------------------ # If your documentation needs a minimal Sphinx version, state it here. -#needs_sphinx = '1.0' +needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom @@ -74,7 +65,7 @@ master_doc = 'index' # General information about the project. project = u'Let\'s Encrypt' -copyright = u'2014, Let\'s Encrypt Project' +copyright = u'2014-2015, Let\'s Encrypt Project' # The version info for the project you're documenting, acts as replacement for # |version| and |release|, also used in various other places throughout the @@ -126,6 +117,9 @@ pygments_style = 'sphinx' # If true, keep warnings as "system message" paragraphs in the built documents. #keep_warnings = False +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = True + # -- Options for HTML output ---------------------------------------------- @@ -289,7 +283,6 @@ man_pages = [ [project], 1), ('man/letsencrypt-renewer', 'letsencrypt-renewer', u'letsencrypt-renewer script documentation', [project], 1), - ('man/jws', 'jws', u'jws script documentation', [project], 1), ] # If true, show URL addresses after external links. @@ -320,7 +313,7 @@ texinfo_documents = [ #texinfo_no_detailmenu = False -# Example configuration for intersphinx: refer to the Python standard library. -intersphinx_mapping = {'http://docs.python.org/': None} - -todo_include_todos = True +intersphinx_mapping = { + 'python': ('https://docs.python.org/', None), + 'acme': ('https://acme-python.readthedocs.org', None), +} diff --git a/docs/contributing.rst b/docs/contributing.rst index 6b6550c71..60e7f35c2 100644 --- a/docs/contributing.rst +++ b/docs/contributing.rst @@ -84,14 +84,8 @@ run (in a separate terminal):: If you would like to test `letsencrypt_nginx` plugin (highly encouraged) make sure to install prerequisites as listed in -``letsencrypt-nginx/tests/boulder-integration.sh``: - -.. include:: ../letsencrypt-nginx/tests/boulder-integration.sh - :start-line: 1 - :end-line: 2 - :code: shell - -and rerun the integration tests suite. +``letsencrypt-nginx/tests/boulder-integration.sh`` and rerun +the integration tests suite. .. _Boulder: https://github.com/letsencrypt/boulder .. _Go: https://golang.org diff --git a/docs/index.rst b/docs/index.rst index b076b45c6..72be096f9 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -13,7 +13,6 @@ Welcome to the Let's Encrypt client documentation! :maxdepth: 1 api - pkgs Indices and tables diff --git a/docs/pkgs.rst b/docs/pkgs.rst deleted file mode 100644 index 2e1b18dfb..000000000 --- a/docs/pkgs.rst +++ /dev/null @@ -1,14 +0,0 @@ -======== -Packages -======== - -.. note:: It is planned to distribute `acme` and plugins separately as - described in `#358`_. For the time being those packages are bundled - together into a single repo, and single documentation. - -.. _`#358`: https://github.com/letsencrypt/letsencrypt/issues/358 - -.. toctree:: - :glob: - - pkgs/** diff --git a/docs/pkgs/acme/index.rst b/docs/pkgs/acme/index.rst deleted file mode 100644 index 23c5a3284..000000000 --- a/docs/pkgs/acme/index.rst +++ /dev/null @@ -1,56 +0,0 @@ -:mod:`acme` -=========== - -.. contents:: - -.. automodule:: acme - :members: - - -Client ------- - -.. automodule:: acme.client - :members: - - -Messages --------- - -.. automodule:: acme.messages - :members: - - -Challenges ----------- - -.. automodule:: acme.challenges - :members: - - -Other ACME objects ------------------- - -.. automodule:: acme.other - :members: - - -Fields ------- - -.. automodule:: acme.fields - :members: - - -Errors ------- - -.. automodule:: acme.errors - :members: - - -Standalone ----------- - -.. automodule:: acme.standalone - :members: diff --git a/docs/pkgs/acme/jose.rst b/docs/pkgs/acme/jose.rst deleted file mode 100644 index fa3a0e9bb..000000000 --- a/docs/pkgs/acme/jose.rst +++ /dev/null @@ -1,67 +0,0 @@ -:mod:`acme.jose` -================ - -.. contents:: - -.. automodule:: acme.jose - :members: - - -JSON Web Algorithms -------------------- - -.. automodule:: acme.jose.jwa - :members: - - -JSON Web Key ------------- - -.. automodule:: acme.jose.jwk - :members: - - -JSON Web Signature ------------------- - -.. automodule:: acme.jose.jws - :members: - - -Implementation details ----------------------- - - -Interfaces -~~~~~~~~~~ - -.. automodule:: acme.jose.interfaces - :members: - - -Errors -~~~~~~ - -.. automodule:: acme.jose.errors - :members: - - -JSON utilities -~~~~~~~~~~~~~~ - -.. automodule:: acme.jose.json_util - :members: - - -JOSE Base64 -~~~~~~~~~~~ - -.. automodule:: acme.jose.b64 - :members: - - -Utilities -~~~~~~~~~ - -.. automodule:: acme.jose.util - :members: diff --git a/docs/pkgs/letsencrypt_apache.rst b/docs/pkgs/letsencrypt_apache.rst deleted file mode 100644 index c4e7e8e6e..000000000 --- a/docs/pkgs/letsencrypt_apache.rst +++ /dev/null @@ -1,42 +0,0 @@ -:mod:`letsencrypt_apache` -------------------------- - -.. automodule:: letsencrypt_apache - :members: - -:mod:`letsencrypt_apache.configurator` -====================================== - -.. automodule:: letsencrypt_apache.configurator - :members: - -:mod:`letsencrypt_apache.display_ops` -===================================== - -.. automodule:: letsencrypt_apache.display_ops - :members: - -:mod:`letsencrypt_apache.dvsni` -=============================== - -.. automodule:: letsencrypt_apache.dvsni - :members: - -:mod:`letsencrypt_apache.obj` -============================= - -.. automodule:: letsencrypt_apache.obj - :members: - -:mod:`letsencrypt_apache.parser` -================================ - -.. automodule:: letsencrypt_apache.parser - :members: - - -:mod:`letsencrypt_apache.augeas_configurator` -============================================= - -.. automodule:: letsencrypt_apache.augeas_configurator - :members: diff --git a/docs/pkgs/letsencrypt_nginx.rst b/docs/pkgs/letsencrypt_nginx.rst deleted file mode 100644 index 03114b685..000000000 --- a/docs/pkgs/letsencrypt_nginx.rst +++ /dev/null @@ -1,35 +0,0 @@ -:mod:`letsencrypt_nginx` ------------------------- - -.. automodule:: letsencrypt_nginx - :members: - -:mod:`letsencrypt_nginx.configurator` -===================================== - -.. automodule:: letsencrypt_nginx.configurator - :members: - -:mod:`letsencrypt_nginx.dvsni` -============================== - -.. automodule:: letsencrypt_nginx.dvsni - :members: - -:mod:`letsencrypt_nginx.obj` -============================ - -.. automodule:: letsencrypt_nginx.obj - :members: - -:mod:`letsencrypt_nginx.parser` -=============================== - -.. automodule:: letsencrypt_nginx.parser - :members: - -:mod:`letsencrypt_nginx.nginxparser` -==================================== - -.. automodule:: letsencrypt_nginx.nginxparser - :members: diff --git a/letsencrypt-apache/MANIFEST.in b/letsencrypt-apache/MANIFEST.in index ff99bf0d8..51c2df858 100644 --- a/letsencrypt-apache/MANIFEST.in +++ b/letsencrypt-apache/MANIFEST.in @@ -1,4 +1,5 @@ include LICENSE.txt include README.rst +recursive-include docs * recursive-include letsencrypt_apache/tests/testdata * include letsencrypt_apache/options-ssl-apache.conf diff --git a/letsencrypt-apache/docs/.gitignore b/letsencrypt-apache/docs/.gitignore new file mode 100644 index 000000000..ba65b13af --- /dev/null +++ b/letsencrypt-apache/docs/.gitignore @@ -0,0 +1 @@ +/_build/ diff --git a/letsencrypt-apache/docs/Makefile b/letsencrypt-apache/docs/Makefile new file mode 100644 index 000000000..9bf5154fe --- /dev/null +++ b/letsencrypt-apache/docs/Makefile @@ -0,0 +1,192 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " applehelp to make an Apple Help Book" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + @echo " coverage to run coverage check of the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/letsencrypt-apache.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/letsencrypt-apache.qhc" + +applehelp: + $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp + @echo + @echo "Build finished. The help book is in $(BUILDDIR)/applehelp." + @echo "N.B. You won't be able to view it unless you put it in" \ + "~/Library/Documentation/Help or install it in your application" \ + "bundle." + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/letsencrypt-apache" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/letsencrypt-apache" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +coverage: + $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage + @echo "Testing of coverage in the sources finished, look at the " \ + "results in $(BUILDDIR)/coverage/python.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/letsencrypt-apache/docs/_static/.gitignore b/letsencrypt-apache/docs/_static/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letsencrypt-apache/docs/_templates/.gitignore b/letsencrypt-apache/docs/_templates/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letsencrypt-apache/docs/api.rst b/letsencrypt-apache/docs/api.rst new file mode 100644 index 000000000..8668ec5d8 --- /dev/null +++ b/letsencrypt-apache/docs/api.rst @@ -0,0 +1,8 @@ +================= +API Documentation +================= + +.. toctree:: + :glob: + + api/** diff --git a/letsencrypt-apache/docs/api/augeas_configurator.rst b/letsencrypt-apache/docs/api/augeas_configurator.rst new file mode 100644 index 000000000..3b1821e3d --- /dev/null +++ b/letsencrypt-apache/docs/api/augeas_configurator.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_apache.augeas_configurator` +--------------------------------------------- + +.. automodule:: letsencrypt_apache.augeas_configurator + :members: diff --git a/letsencrypt-apache/docs/api/configurator.rst b/letsencrypt-apache/docs/api/configurator.rst new file mode 100644 index 000000000..2ed613286 --- /dev/null +++ b/letsencrypt-apache/docs/api/configurator.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_apache.configurator` +-------------------------------------- + +.. automodule:: letsencrypt_apache.configurator + :members: diff --git a/letsencrypt-apache/docs/api/display_ops.rst b/letsencrypt-apache/docs/api/display_ops.rst new file mode 100644 index 000000000..59ff9d15e --- /dev/null +++ b/letsencrypt-apache/docs/api/display_ops.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_apache.display_ops` +------------------------------------- + +.. automodule:: letsencrypt_apache.display_ops + :members: diff --git a/letsencrypt-apache/docs/api/dvsni.rst b/letsencrypt-apache/docs/api/dvsni.rst new file mode 100644 index 000000000..945771db8 --- /dev/null +++ b/letsencrypt-apache/docs/api/dvsni.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_apache.dvsni` +------------------------------- + +.. automodule:: letsencrypt_apache.dvsni + :members: diff --git a/letsencrypt-apache/docs/api/obj.rst b/letsencrypt-apache/docs/api/obj.rst new file mode 100644 index 000000000..969293ca1 --- /dev/null +++ b/letsencrypt-apache/docs/api/obj.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_apache.obj` +----------------------------- + +.. automodule:: letsencrypt_apache.obj + :members: diff --git a/letsencrypt-apache/docs/api/parser.rst b/letsencrypt-apache/docs/api/parser.rst new file mode 100644 index 000000000..0c998e06c --- /dev/null +++ b/letsencrypt-apache/docs/api/parser.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_apache.parser` +-------------------------------- + +.. automodule:: letsencrypt_apache.parser + :members: diff --git a/letsencrypt-apache/docs/conf.py b/letsencrypt-apache/docs/conf.py new file mode 100644 index 000000000..e439428af --- /dev/null +++ b/letsencrypt-apache/docs/conf.py @@ -0,0 +1,318 @@ +# -*- coding: utf-8 -*- +# +# letsencrypt-apache documentation build configuration file, created by +# sphinx-quickstart on Sun Oct 18 13:39:26 2015. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os +import shlex + +import mock + + +# http://docs.readthedocs.org/en/latest/faq.html#i-get-import-errors-on-libraries-that-depend-on-c-modules +# c.f. #262 +sys.modules.update( + (mod_name, mock.MagicMock()) for mod_name in ['augeas']) + +here = os.path.abspath(os.path.dirname(__file__)) + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath(os.path.join(here, '..'))) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'sphinx.ext.intersphinx', + 'sphinx.ext.todo', + 'sphinx.ext.coverage', + 'sphinx.ext.viewcode', +] + +autodoc_member_order = 'bysource' +autodoc_default_flags = ['show-inheritance', 'private-members'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix(es) of source filenames. +# You can specify multiple suffix as a list of string: +# source_suffix = ['.rst', '.md'] +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'letsencrypt-apache' +copyright = u'2014-2015, Let\'s Encrypt Project' +author = u'Let\'s Encrypt Project' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0' +# The full version, including alpha/beta/rc tags. +release = '0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = 'en' + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +default_role = 'py:obj' + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = True + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. + +# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs +# on_rtd is whether we are on readthedocs.org +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' +if not on_rtd: # only import and set the theme if we're building docs locally + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] +# otherwise, readthedocs.org uses their theme by default, so no need to specify it + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Language to be used for generating the HTML full-text search index. +# Sphinx supports the following languages: +# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja' +# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr' +#html_search_language = 'en' + +# A dictionary with options for the search language support, empty by default. +# Now only 'ja' uses this config value +#html_search_options = {'type': 'default'} + +# The name of a javascript file (relative to the configuration directory) that +# implements a search results scorer. If empty, the default will be used. +#html_search_scorer = 'scorer.js' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'letsencrypt-apachedoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', + +# Latex figure (float) alignment +#'figure_align': 'htbp', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + (master_doc, 'letsencrypt-apache.tex', u'letsencrypt-apache Documentation', + u'Let\'s Encrypt Project', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'letsencrypt-apache', u'letsencrypt-apache Documentation', + [author], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'letsencrypt-apache', u'letsencrypt-apache Documentation', + author, 'letsencrypt-apache', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False + + +intersphinx_mapping = { + 'python': ('https://docs.python.org/', None), + 'acme': ('https://acme-python.readthedocs.org', None), + 'letsencrypt': ('https://letsencrypt.readthedocs.org', None), +} diff --git a/letsencrypt-apache/docs/index.rst b/letsencrypt-apache/docs/index.rst new file mode 100644 index 000000000..f968ccbef --- /dev/null +++ b/letsencrypt-apache/docs/index.rst @@ -0,0 +1,31 @@ +.. letsencrypt-apache documentation master file, created by + sphinx-quickstart on Sun Oct 18 13:39:26 2015. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to letsencrypt-apache's documentation! +============================================== + +Contents: + +.. toctree:: + :maxdepth: 2 + + +.. toctree:: + :maxdepth: 1 + + api + + +.. automodule:: letsencrypt_apache + :members: + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + diff --git a/letsencrypt-apache/docs/make.bat b/letsencrypt-apache/docs/make.bat new file mode 100644 index 000000000..62a54fd2c --- /dev/null +++ b/letsencrypt-apache/docs/make.bat @@ -0,0 +1,263 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=_build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . +set I18NSPHINXOPTS=%SPHINXOPTS% . +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. xml to make Docutils-native XML files + echo. pseudoxml to make pseudoxml-XML files for display purposes + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + echo. coverage to run coverage check of the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + + +REM Check if sphinx-build is available and fallback to Python version if any +%SPHINXBUILD% 2> nul +if errorlevel 9009 goto sphinx_python +goto sphinx_ok + +:sphinx_python + +set SPHINXBUILD=python -m sphinx.__init__ +%SPHINXBUILD% 2> nul +if errorlevel 9009 ( + echo. + echo.The 'sphinx-build' command was not found. Make sure you have Sphinx + echo.installed, then set the SPHINXBUILD environment variable to point + echo.to the full path of the 'sphinx-build' executable. Alternatively you + echo.may add the Sphinx directory to PATH. + echo. + echo.If you don't have Sphinx installed, grab it from + echo.http://sphinx-doc.org/ + exit /b 1 +) + +:sphinx_ok + + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\letsencrypt-apache.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\letsencrypt-apache.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdf" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdfja" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf-ja + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +if "%1" == "coverage" ( + %SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage + if errorlevel 1 exit /b 1 + echo. + echo.Testing of coverage in the sources finished, look at the ^ +results in %BUILDDIR%/coverage/python.txt. + goto end +) + +if "%1" == "xml" ( + %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The XML files are in %BUILDDIR%/xml. + goto end +) + +if "%1" == "pseudoxml" ( + %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. + goto end +) + +:end diff --git a/letsencrypt-apache/readthedocs.org.requirements.txt b/letsencrypt-apache/readthedocs.org.requirements.txt new file mode 100644 index 000000000..9e782a01e --- /dev/null +++ b/letsencrypt-apache/readthedocs.org.requirements.txt @@ -0,0 +1,10 @@ +# readthedocs.org gives no way to change the install command to "pip +# install -e .[docs]" (that would in turn install documentation +# dependencies), but it allows to specify a requirements.txt file at +# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259) + +# Although ReadTheDocs certainly doesn't need to install the project +# in --editable mode (-e), just "pip install .[docs]" does not work as +# expected and "pip install -e .[docs]" must be used instead + +-e letsencrypt-apache[docs] diff --git a/letsencrypt-apache/setup.py b/letsencrypt-apache/setup.py index 626e700b2..2180219f1 100644 --- a/letsencrypt-apache/setup.py +++ b/letsencrypt-apache/setup.py @@ -20,6 +20,11 @@ if sys.version_info < (2, 7): else: install_requires.append('mock') +docs_extras = [ + 'Sphinx>=1.0', # autodoc_member_order = 'bysource', autodoc_default_flags + 'sphinx_rtd_theme', +] + setup( name='letsencrypt-apache', version=version, @@ -48,6 +53,9 @@ setup( packages=find_packages(), include_package_data=True, install_requires=install_requires, + extras_require={ + 'docs': docs_extras, + }, entry_points={ 'letsencrypt.plugins': [ 'apache = letsencrypt_apache.configurator:ApacheConfigurator', diff --git a/letsencrypt-compatibility-test/MANIFEST.in b/letsencrypt-compatibility-test/MANIFEST.in index 4d346a5d0..24d777841 100644 --- a/letsencrypt-compatibility-test/MANIFEST.in +++ b/letsencrypt-compatibility-test/MANIFEST.in @@ -1,5 +1,6 @@ include LICENSE.txt include README.rst +recursive-include docs * include letsencrypt_compatibility_test/configurators/apache/a2enmod.sh include letsencrypt_compatibility_test/configurators/apache/a2dismod.sh include letsencrypt_compatibility_test/configurators/apache/Dockerfile diff --git a/letsencrypt-compatibility-test/docs/.gitignore b/letsencrypt-compatibility-test/docs/.gitignore new file mode 100644 index 000000000..ba65b13af --- /dev/null +++ b/letsencrypt-compatibility-test/docs/.gitignore @@ -0,0 +1 @@ +/_build/ diff --git a/letsencrypt-compatibility-test/docs/Makefile b/letsencrypt-compatibility-test/docs/Makefile new file mode 100644 index 000000000..90582a59b --- /dev/null +++ b/letsencrypt-compatibility-test/docs/Makefile @@ -0,0 +1,192 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " applehelp to make an Apple Help Book" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + @echo " coverage to run coverage check of the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/letsencrypt-compatibility-test.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/letsencrypt-compatibility-test.qhc" + +applehelp: + $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp + @echo + @echo "Build finished. The help book is in $(BUILDDIR)/applehelp." + @echo "N.B. You won't be able to view it unless you put it in" \ + "~/Library/Documentation/Help or install it in your application" \ + "bundle." + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/letsencrypt-compatibility-test" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/letsencrypt-compatibility-test" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +coverage: + $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage + @echo "Testing of coverage in the sources finished, look at the " \ + "results in $(BUILDDIR)/coverage/python.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/letsencrypt-compatibility-test/docs/_static/.gitignore b/letsencrypt-compatibility-test/docs/_static/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letsencrypt-compatibility-test/docs/_templates/.gitignore b/letsencrypt-compatibility-test/docs/_templates/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letsencrypt-compatibility-test/docs/api.rst b/letsencrypt-compatibility-test/docs/api.rst new file mode 100644 index 000000000..8668ec5d8 --- /dev/null +++ b/letsencrypt-compatibility-test/docs/api.rst @@ -0,0 +1,8 @@ +================= +API Documentation +================= + +.. toctree:: + :glob: + + api/** diff --git a/docs/pkgs/letsencrypt_compatibility_test.rst b/letsencrypt-compatibility-test/docs/api/index.rst similarity index 100% rename from docs/pkgs/letsencrypt_compatibility_test.rst rename to letsencrypt-compatibility-test/docs/api/index.rst diff --git a/letsencrypt-compatibility-test/docs/conf.py b/letsencrypt-compatibility-test/docs/conf.py new file mode 100644 index 000000000..5a63c1dca --- /dev/null +++ b/letsencrypt-compatibility-test/docs/conf.py @@ -0,0 +1,314 @@ +# -*- coding: utf-8 -*- +# +# letsencrypt-compatibility-test documentation build configuration file, created by +# sphinx-quickstart on Sun Oct 18 13:40:53 2015. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os +import shlex + + +here = os.path.abspath(os.path.dirname(__file__)) + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath(os.path.join(here, '..'))) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'sphinx.ext.intersphinx', + 'sphinx.ext.todo', + 'sphinx.ext.coverage', + 'sphinx.ext.viewcode', + 'repoze.sphinx.autointerface', +] + +autodoc_member_order = 'bysource' +autodoc_default_flags = ['show-inheritance', 'private-members'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix(es) of source filenames. +# You can specify multiple suffix as a list of string: +# source_suffix = ['.rst', '.md'] +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'letsencrypt-compatibility-test' +copyright = u'2014-2015, Let\'s Encrypt Project' +author = u'Let\'s Encrypt Project' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0' +# The full version, including alpha/beta/rc tags. +release = '0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = 'en' + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +default_role = 'py:obj' + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = True + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. + +# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs +# on_rtd is whether we are on readthedocs.org +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' +if not on_rtd: # only import and set the theme if we're building docs locally + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] +# otherwise, readthedocs.org uses their theme by default, so no need to specify it + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Language to be used for generating the HTML full-text search index. +# Sphinx supports the following languages: +# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja' +# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr' +#html_search_language = 'en' + +# A dictionary with options for the search language support, empty by default. +# Now only 'ja' uses this config value +#html_search_options = {'type': 'default'} + +# The name of a javascript file (relative to the configuration directory) that +# implements a search results scorer. If empty, the default will be used. +#html_search_scorer = 'scorer.js' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'letsencrypt-compatibility-testdoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', + +# Latex figure (float) alignment +#'figure_align': 'htbp', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + (master_doc, 'letsencrypt-compatibility-test.tex', u'letsencrypt-compatibility-test Documentation', + u'Let\'s Encrypt Project', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'letsencrypt-compatibility-test', u'letsencrypt-compatibility-test Documentation', + [author], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'letsencrypt-compatibility-test', u'letsencrypt-compatibility-test Documentation', + author, 'letsencrypt-compatibility-test', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False + + +intersphinx_mapping = { + 'python': ('https://docs.python.org/', None), + 'acme': ('https://acme-python.readthedocs.org', None), + 'letsencrypt': ('https://letsencrypt.readthedocs.org', None), + 'letsencrypt-apache': ('https://letsencrypt-apache.readthedocs.org', None), + 'letsencrypt-nginx': ('https://letsencrypt-nginx.readthedocs.org', None), +} diff --git a/letsencrypt-compatibility-test/docs/index.rst b/letsencrypt-compatibility-test/docs/index.rst new file mode 100644 index 000000000..df57ee6e6 --- /dev/null +++ b/letsencrypt-compatibility-test/docs/index.rst @@ -0,0 +1,27 @@ +.. letsencrypt-compatibility-test documentation master file, created by + sphinx-quickstart on Sun Oct 18 13:40:53 2015. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to letsencrypt-compatibility-test's documentation! +========================================================== + +Contents: + +.. toctree:: + :maxdepth: 2 + + +.. toctree:: + :maxdepth: 1 + + api + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + diff --git a/letsencrypt-compatibility-test/docs/make.bat b/letsencrypt-compatibility-test/docs/make.bat new file mode 100644 index 000000000..c75269bdc --- /dev/null +++ b/letsencrypt-compatibility-test/docs/make.bat @@ -0,0 +1,263 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=_build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . +set I18NSPHINXOPTS=%SPHINXOPTS% . +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. xml to make Docutils-native XML files + echo. pseudoxml to make pseudoxml-XML files for display purposes + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + echo. coverage to run coverage check of the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + + +REM Check if sphinx-build is available and fallback to Python version if any +%SPHINXBUILD% 2> nul +if errorlevel 9009 goto sphinx_python +goto sphinx_ok + +:sphinx_python + +set SPHINXBUILD=python -m sphinx.__init__ +%SPHINXBUILD% 2> nul +if errorlevel 9009 ( + echo. + echo.The 'sphinx-build' command was not found. Make sure you have Sphinx + echo.installed, then set the SPHINXBUILD environment variable to point + echo.to the full path of the 'sphinx-build' executable. Alternatively you + echo.may add the Sphinx directory to PATH. + echo. + echo.If you don't have Sphinx installed, grab it from + echo.http://sphinx-doc.org/ + exit /b 1 +) + +:sphinx_ok + + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\letsencrypt-compatibility-test.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\letsencrypt-compatibility-test.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdf" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdfja" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf-ja + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +if "%1" == "coverage" ( + %SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage + if errorlevel 1 exit /b 1 + echo. + echo.Testing of coverage in the sources finished, look at the ^ +results in %BUILDDIR%/coverage/python.txt. + goto end +) + +if "%1" == "xml" ( + %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The XML files are in %BUILDDIR%/xml. + goto end +) + +if "%1" == "pseudoxml" ( + %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. + goto end +) + +:end diff --git a/letsencrypt-compatibility-test/readthedocs.org.requirements.txt b/letsencrypt-compatibility-test/readthedocs.org.requirements.txt new file mode 100644 index 000000000..86d680426 --- /dev/null +++ b/letsencrypt-compatibility-test/readthedocs.org.requirements.txt @@ -0,0 +1,10 @@ +# readthedocs.org gives no way to change the install command to "pip +# install -e .[docs]" (that would in turn install documentation +# dependencies), but it allows to specify a requirements.txt file at +# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259) + +# Although ReadTheDocs certainly doesn't need to install the project +# in --editable mode (-e), just "pip install .[docs]" does not work as +# expected and "pip install -e .[docs]" must be used instead + +-e letsencrypt-compatibility-test[docs] diff --git a/letsencrypt-compatibility-test/setup.py b/letsencrypt-compatibility-test/setup.py index 2e70fd1d7..3bd8f274e 100644 --- a/letsencrypt-compatibility-test/setup.py +++ b/letsencrypt-compatibility-test/setup.py @@ -19,6 +19,12 @@ if sys.version_info < (2, 7): else: install_requires.append('mock') +docs_extras = [ + 'repoze.sphinx.autointerface', + 'Sphinx>=1.0', # autodoc_member_order = 'bysource', autodoc_default_flags + 'sphinx_rtd_theme', +] + setup( name='letsencrypt-compatibility-test', version=version, @@ -41,6 +47,9 @@ setup( packages=find_packages(), include_package_data=True, install_requires=install_requires, + extras_require={ + 'docs': docs_extras, + }, entry_points={ 'console_scripts': [ 'letsencrypt-compatibility-test = letsencrypt_compatibility_test.test_driver:main', diff --git a/letsencrypt-nginx/MANIFEST.in b/letsencrypt-nginx/MANIFEST.in index c4bd67735..912d624d9 100644 --- a/letsencrypt-nginx/MANIFEST.in +++ b/letsencrypt-nginx/MANIFEST.in @@ -1,4 +1,5 @@ include LICENSE.txt include README.rst +recursive-include docs * recursive-include letsencrypt_nginx/tests/testdata * include letsencrypt_nginx/options-ssl-nginx.conf diff --git a/letsencrypt-nginx/docs/.gitignore b/letsencrypt-nginx/docs/.gitignore new file mode 100644 index 000000000..ba65b13af --- /dev/null +++ b/letsencrypt-nginx/docs/.gitignore @@ -0,0 +1 @@ +/_build/ diff --git a/letsencrypt-nginx/docs/Makefile b/letsencrypt-nginx/docs/Makefile new file mode 100644 index 000000000..3a3828235 --- /dev/null +++ b/letsencrypt-nginx/docs/Makefile @@ -0,0 +1,192 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " applehelp to make an Apple Help Book" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + @echo " coverage to run coverage check of the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/letsencrypt-nginx.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/letsencrypt-nginx.qhc" + +applehelp: + $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp + @echo + @echo "Build finished. The help book is in $(BUILDDIR)/applehelp." + @echo "N.B. You won't be able to view it unless you put it in" \ + "~/Library/Documentation/Help or install it in your application" \ + "bundle." + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/letsencrypt-nginx" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/letsencrypt-nginx" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +coverage: + $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage + @echo "Testing of coverage in the sources finished, look at the " \ + "results in $(BUILDDIR)/coverage/python.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/letsencrypt-nginx/docs/_static/.gitignore b/letsencrypt-nginx/docs/_static/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letsencrypt-nginx/docs/_templates/.gitignore b/letsencrypt-nginx/docs/_templates/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letsencrypt-nginx/docs/api.rst b/letsencrypt-nginx/docs/api.rst new file mode 100644 index 000000000..8668ec5d8 --- /dev/null +++ b/letsencrypt-nginx/docs/api.rst @@ -0,0 +1,8 @@ +================= +API Documentation +================= + +.. toctree:: + :glob: + + api/** diff --git a/letsencrypt-nginx/docs/api/dvsni.rst b/letsencrypt-nginx/docs/api/dvsni.rst new file mode 100644 index 000000000..4f5f9d7e3 --- /dev/null +++ b/letsencrypt-nginx/docs/api/dvsni.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_nginx.dvsni` +------------------------------ + +.. automodule:: letsencrypt_nginx.dvsni + :members: diff --git a/letsencrypt-nginx/docs/api/nginxparser.rst b/letsencrypt-nginx/docs/api/nginxparser.rst new file mode 100644 index 000000000..e55bda0b1 --- /dev/null +++ b/letsencrypt-nginx/docs/api/nginxparser.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_nginx.nginxparser` +------------------------------------ + +.. automodule:: letsencrypt_nginx.nginxparser + :members: diff --git a/letsencrypt-nginx/docs/api/obj.rst b/letsencrypt-nginx/docs/api/obj.rst new file mode 100644 index 000000000..418b87cf7 --- /dev/null +++ b/letsencrypt-nginx/docs/api/obj.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_nginx.obj` +---------------------------- + +.. automodule:: letsencrypt_nginx.obj + :members: diff --git a/letsencrypt-nginx/docs/api/parser.rst b/letsencrypt-nginx/docs/api/parser.rst new file mode 100644 index 000000000..6582263ef --- /dev/null +++ b/letsencrypt-nginx/docs/api/parser.rst @@ -0,0 +1,5 @@ +:mod:`letsencrypt_nginx.parser` +------------------------------- + +.. automodule:: letsencrypt_nginx.parser + :members: diff --git a/letsencrypt-nginx/docs/conf.py b/letsencrypt-nginx/docs/conf.py new file mode 100644 index 000000000..8bcae3a78 --- /dev/null +++ b/letsencrypt-nginx/docs/conf.py @@ -0,0 +1,311 @@ +# -*- coding: utf-8 -*- +# +# letsencrypt-nginx documentation build configuration file, created by +# sphinx-quickstart on Sun Oct 18 13:39:39 2015. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os +import shlex + + +here = os.path.abspath(os.path.dirname(__file__)) + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath(os.path.join(here, '..'))) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'sphinx.ext.intersphinx', + 'sphinx.ext.todo', + 'sphinx.ext.coverage', + 'sphinx.ext.viewcode', +] + +autodoc_member_order = 'bysource' +autodoc_default_flags = ['show-inheritance', 'private-members'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix(es) of source filenames. +# You can specify multiple suffix as a list of string: +# source_suffix = ['.rst', '.md'] +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'letsencrypt-nginx' +copyright = u'2014-2015, Let\'s Encrypt Project' +author = u'Let\'s Encrypt Project' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0' +# The full version, including alpha/beta/rc tags. +release = '0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = 'en' + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +default_role = 'py:obj' + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = True + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. + +# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs +# on_rtd is whether we are on readthedocs.org +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' +if not on_rtd: # only import and set the theme if we're building docs locally + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] +# otherwise, readthedocs.org uses their theme by default, so no need to specify it + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Language to be used for generating the HTML full-text search index. +# Sphinx supports the following languages: +# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja' +# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr' +#html_search_language = 'en' + +# A dictionary with options for the search language support, empty by default. +# Now only 'ja' uses this config value +#html_search_options = {'type': 'default'} + +# The name of a javascript file (relative to the configuration directory) that +# implements a search results scorer. If empty, the default will be used. +#html_search_scorer = 'scorer.js' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'letsencrypt-nginxdoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', + +# Latex figure (float) alignment +#'figure_align': 'htbp', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + (master_doc, 'letsencrypt-nginx.tex', u'letsencrypt-nginx Documentation', + u'Let\'s Encrypt Project', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'letsencrypt-nginx', u'letsencrypt-nginx Documentation', + [author], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'letsencrypt-nginx', u'letsencrypt-nginx Documentation', + author, 'letsencrypt-nginx', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False + + +intersphinx_mapping = { + 'python': ('https://docs.python.org/', None), + 'acme': ('https://acme-python.readthedocs.org', None), + 'letsencrypt': ('https://letsencrypt.readthedocs.org', None), +} diff --git a/letsencrypt-nginx/docs/index.rst b/letsencrypt-nginx/docs/index.rst new file mode 100644 index 000000000..e4f8f715f --- /dev/null +++ b/letsencrypt-nginx/docs/index.rst @@ -0,0 +1,31 @@ +.. letsencrypt-nginx documentation master file, created by + sphinx-quickstart on Sun Oct 18 13:39:39 2015. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to letsencrypt-nginx's documentation! +============================================= + +Contents: + +.. toctree:: + :maxdepth: 2 + + +.. toctree:: + :maxdepth: 1 + + api + + +.. automodule:: letsencrypt_nginx + :members: + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + diff --git a/letsencrypt-nginx/docs/make.bat b/letsencrypt-nginx/docs/make.bat new file mode 100644 index 000000000..eb19a3fb5 --- /dev/null +++ b/letsencrypt-nginx/docs/make.bat @@ -0,0 +1,263 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=_build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . +set I18NSPHINXOPTS=%SPHINXOPTS% . +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. xml to make Docutils-native XML files + echo. pseudoxml to make pseudoxml-XML files for display purposes + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + echo. coverage to run coverage check of the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + + +REM Check if sphinx-build is available and fallback to Python version if any +%SPHINXBUILD% 2> nul +if errorlevel 9009 goto sphinx_python +goto sphinx_ok + +:sphinx_python + +set SPHINXBUILD=python -m sphinx.__init__ +%SPHINXBUILD% 2> nul +if errorlevel 9009 ( + echo. + echo.The 'sphinx-build' command was not found. Make sure you have Sphinx + echo.installed, then set the SPHINXBUILD environment variable to point + echo.to the full path of the 'sphinx-build' executable. Alternatively you + echo.may add the Sphinx directory to PATH. + echo. + echo.If you don't have Sphinx installed, grab it from + echo.http://sphinx-doc.org/ + exit /b 1 +) + +:sphinx_ok + + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\letsencrypt-nginx.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\letsencrypt-nginx.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdf" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdfja" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf-ja + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +if "%1" == "coverage" ( + %SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage + if errorlevel 1 exit /b 1 + echo. + echo.Testing of coverage in the sources finished, look at the ^ +results in %BUILDDIR%/coverage/python.txt. + goto end +) + +if "%1" == "xml" ( + %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The XML files are in %BUILDDIR%/xml. + goto end +) + +if "%1" == "pseudoxml" ( + %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. + goto end +) + +:end diff --git a/letsencrypt-nginx/letsencrypt_nginx/parser.py b/letsencrypt-nginx/letsencrypt_nginx/parser.py index fc8ed95f1..19483821a 100644 --- a/letsencrypt-nginx/letsencrypt_nginx/parser.py +++ b/letsencrypt-nginx/letsencrypt_nginx/parser.py @@ -491,5 +491,5 @@ def _add_directives(block, directives, replace=False): changed = True if not changed: raise errors.MisconfigurationError( - 'LetsEncrypt expected directive for %s in the Nginx ' + 'Let\'s Encrypt expected directive for %s in the Nginx ' 'config but did not find it.' % directive[0]) diff --git a/letsencrypt-nginx/readthedocs.org.requirements.txt b/letsencrypt-nginx/readthedocs.org.requirements.txt new file mode 100644 index 000000000..9a36ed259 --- /dev/null +++ b/letsencrypt-nginx/readthedocs.org.requirements.txt @@ -0,0 +1,10 @@ +# readthedocs.org gives no way to change the install command to "pip +# install -e .[docs]" (that would in turn install documentation +# dependencies), but it allows to specify a requirements.txt file at +# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259) + +# Although ReadTheDocs certainly doesn't need to install the project +# in --editable mode (-e), just "pip install .[docs]" does not work as +# expected and "pip install -e .[docs]" must be used instead + +-e letsencrypt-nginx[docs] diff --git a/letsencrypt-nginx/setup.py b/letsencrypt-nginx/setup.py index a37b8222b..5d80807d1 100644 --- a/letsencrypt-nginx/setup.py +++ b/letsencrypt-nginx/setup.py @@ -20,6 +20,11 @@ if sys.version_info < (2, 7): else: install_requires.append('mock') +docs_extras = [ + 'Sphinx>=1.0', # autodoc_member_order = 'bysource', autodoc_default_flags + 'sphinx_rtd_theme', +] + setup( name='letsencrypt-nginx', version=version, @@ -48,6 +53,9 @@ setup( packages=find_packages(), include_package_data=True, install_requires=install_requires, + extras_require={ + 'docs': docs_extras, + }, entry_points={ 'letsencrypt.plugins': [ 'nginx = letsencrypt_nginx.configurator:NginxConfigurator', diff --git a/letshelp-letsencrypt/MANIFEST.in b/letshelp-letsencrypt/MANIFEST.in index 96c1d7ba5..6ea55a950 100644 --- a/letshelp-letsencrypt/MANIFEST.in +++ b/letshelp-letsencrypt/MANIFEST.in @@ -1,3 +1,4 @@ include LICENSE.txt include README.rst +recursive-include docs * recursive-include letshelp_letsencrypt/testdata * diff --git a/letshelp-letsencrypt/docs/.gitignore b/letshelp-letsencrypt/docs/.gitignore new file mode 100644 index 000000000..ba65b13af --- /dev/null +++ b/letshelp-letsencrypt/docs/.gitignore @@ -0,0 +1 @@ +/_build/ diff --git a/letshelp-letsencrypt/docs/Makefile b/letshelp-letsencrypt/docs/Makefile new file mode 100644 index 000000000..8e742d837 --- /dev/null +++ b/letshelp-letsencrypt/docs/Makefile @@ -0,0 +1,192 @@ +# Makefile for Sphinx documentation +# + +# You can set these variables from the command line. +SPHINXOPTS = +SPHINXBUILD = sphinx-build +PAPER = +BUILDDIR = _build + +# User-friendly check for sphinx-build +ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) +$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/) +endif + +# Internal variables. +PAPEROPT_a4 = -D latex_paper_size=a4 +PAPEROPT_letter = -D latex_paper_size=letter +ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# the i18n builder cannot share the environment and doctrees with the others +I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . + +.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext + +help: + @echo "Please use \`make ' where is one of" + @echo " html to make standalone HTML files" + @echo " dirhtml to make HTML files named index.html in directories" + @echo " singlehtml to make a single large HTML file" + @echo " pickle to make pickle files" + @echo " json to make JSON files" + @echo " htmlhelp to make HTML files and a HTML help project" + @echo " qthelp to make HTML files and a qthelp project" + @echo " applehelp to make an Apple Help Book" + @echo " devhelp to make HTML files and a Devhelp project" + @echo " epub to make an epub" + @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" + @echo " latexpdf to make LaTeX files and run them through pdflatex" + @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" + @echo " text to make text files" + @echo " man to make manual pages" + @echo " texinfo to make Texinfo files" + @echo " info to make Texinfo files and run them through makeinfo" + @echo " gettext to make PO message catalogs" + @echo " changes to make an overview of all changed/added/deprecated items" + @echo " xml to make Docutils-native XML files" + @echo " pseudoxml to make pseudoxml-XML files for display purposes" + @echo " linkcheck to check all external links for integrity" + @echo " doctest to run all doctests embedded in the documentation (if enabled)" + @echo " coverage to run coverage check of the documentation (if enabled)" + +clean: + rm -rf $(BUILDDIR)/* + +html: + $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." + +dirhtml: + $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml + @echo + @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." + +singlehtml: + $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml + @echo + @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." + +pickle: + $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle + @echo + @echo "Build finished; now you can process the pickle files." + +json: + $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json + @echo + @echo "Build finished; now you can process the JSON files." + +htmlhelp: + $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp + @echo + @echo "Build finished; now you can run HTML Help Workshop with the" \ + ".hhp project file in $(BUILDDIR)/htmlhelp." + +qthelp: + $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp + @echo + @echo "Build finished; now you can run "qcollectiongenerator" with the" \ + ".qhcp project file in $(BUILDDIR)/qthelp, like this:" + @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/letshelp-letsencrypt.qhcp" + @echo "To view the help file:" + @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/letshelp-letsencrypt.qhc" + +applehelp: + $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp + @echo + @echo "Build finished. The help book is in $(BUILDDIR)/applehelp." + @echo "N.B. You won't be able to view it unless you put it in" \ + "~/Library/Documentation/Help or install it in your application" \ + "bundle." + +devhelp: + $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp + @echo + @echo "Build finished." + @echo "To view the help file:" + @echo "# mkdir -p $$HOME/.local/share/devhelp/letshelp-letsencrypt" + @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/letshelp-letsencrypt" + @echo "# devhelp" + +epub: + $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub + @echo + @echo "Build finished. The epub file is in $(BUILDDIR)/epub." + +latex: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo + @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." + @echo "Run \`make' in that directory to run these through (pdf)latex" \ + "(use \`make latexpdf' here to do that automatically)." + +latexpdf: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through pdflatex..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +latexpdfja: + $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex + @echo "Running LaTeX files through platex and dvipdfmx..." + $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja + @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." + +text: + $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text + @echo + @echo "Build finished. The text files are in $(BUILDDIR)/text." + +man: + $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man + @echo + @echo "Build finished. The manual pages are in $(BUILDDIR)/man." + +texinfo: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo + @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." + @echo "Run \`make' in that directory to run these through makeinfo" \ + "(use \`make info' here to do that automatically)." + +info: + $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo + @echo "Running Texinfo files through makeinfo..." + make -C $(BUILDDIR)/texinfo info + @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." + +gettext: + $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale + @echo + @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." + +changes: + $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes + @echo + @echo "The overview file is in $(BUILDDIR)/changes." + +linkcheck: + $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck + @echo + @echo "Link check complete; look for any errors in the above output " \ + "or in $(BUILDDIR)/linkcheck/output.txt." + +doctest: + $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest + @echo "Testing of doctests in the sources finished, look at the " \ + "results in $(BUILDDIR)/doctest/output.txt." + +coverage: + $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage + @echo "Testing of coverage in the sources finished, look at the " \ + "results in $(BUILDDIR)/coverage/python.txt." + +xml: + $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml + @echo + @echo "Build finished. The XML files are in $(BUILDDIR)/xml." + +pseudoxml: + $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml + @echo + @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." diff --git a/letshelp-letsencrypt/docs/_static/.gitignore b/letshelp-letsencrypt/docs/_static/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letshelp-letsencrypt/docs/_templates/.gitignore b/letshelp-letsencrypt/docs/_templates/.gitignore new file mode 100644 index 000000000..e69de29bb diff --git a/letshelp-letsencrypt/docs/api.rst b/letshelp-letsencrypt/docs/api.rst new file mode 100644 index 000000000..8668ec5d8 --- /dev/null +++ b/letshelp-letsencrypt/docs/api.rst @@ -0,0 +1,8 @@ +================= +API Documentation +================= + +.. toctree:: + :glob: + + api/** diff --git a/docs/pkgs/letshelp_letsencrypt.rst b/letshelp-letsencrypt/docs/api/index.rst similarity index 100% rename from docs/pkgs/letshelp_letsencrypt.rst rename to letshelp-letsencrypt/docs/api/index.rst diff --git a/letshelp-letsencrypt/docs/conf.py b/letshelp-letsencrypt/docs/conf.py new file mode 100644 index 000000000..abbf3621d --- /dev/null +++ b/letshelp-letsencrypt/docs/conf.py @@ -0,0 +1,311 @@ +# -*- coding: utf-8 -*- +# +# letshelp-letsencrypt documentation build configuration file, created by +# sphinx-quickstart on Sun Oct 18 13:40:19 2015. +# +# This file is execfile()d with the current directory set to its +# containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys +import os +import shlex + + +here = os.path.abspath(os.path.dirname(__file__)) + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +sys.path.insert(0, os.path.abspath(os.path.join(here, '..'))) + +# -- General configuration ------------------------------------------------ + +# If your documentation needs a minimal Sphinx version, state it here. +needs_sphinx = '1.0' + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = [ + 'sphinx.ext.autodoc', + 'sphinx.ext.intersphinx', + 'sphinx.ext.todo', + 'sphinx.ext.coverage', + 'sphinx.ext.viewcode', +] + +autodoc_member_order = 'bysource' +autodoc_default_flags = ['show-inheritance', 'private-members'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix(es) of source filenames. +# You can specify multiple suffix as a list of string: +# source_suffix = ['.rst', '.md'] +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8-sig' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'letshelp-letsencrypt' +copyright = u'2014-2015, Let\'s Encrypt Project' +author = u'Let\'s Encrypt Project' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '0' +# The full version, including alpha/beta/rc tags. +release = '0' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +# +# This is also used if you do content translation via gettext catalogs. +# Usually you set "language" from the command line for these cases. +language = 'en' + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +exclude_patterns = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all +# documents. +default_role = 'py:obj' + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# If true, keep warnings as "system message" paragraphs in the built documents. +#keep_warnings = False + +# If true, `todo` and `todoList` produce output, else they produce nothing. +todo_include_todos = True + + +# -- Options for HTML output ---------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. + +# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs +# on_rtd is whether we are on readthedocs.org +on_rtd = os.environ.get('READTHEDOCS', None) == 'True' +if not on_rtd: # only import and set the theme if we're building docs locally + import sphinx_rtd_theme + html_theme = 'sphinx_rtd_theme' + html_theme_path = [sphinx_rtd_theme.get_html_theme_path()] +# otherwise, readthedocs.org uses their theme by default, so no need to specify it + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +# Add any paths that contain custom themes here, relative to this directory. +#html_theme_path = [] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# Add any extra paths that contain custom files (such as robots.txt or +# .htaccess) here, relative to this directory. These files are copied +# directly to the root of the documentation. +#html_extra_path = [] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +#html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +#html_domain_indices = True + +# If false, no index is generated. +#html_use_index = True + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +#html_show_sourcelink = True + +# If true, "Created using Sphinx" is shown in the HTML footer. Default is True. +#html_show_sphinx = True + +# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True. +#html_show_copyright = True + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# This is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = None + +# Language to be used for generating the HTML full-text search index. +# Sphinx supports the following languages: +# 'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja' +# 'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr' +#html_search_language = 'en' + +# A dictionary with options for the search language support, empty by default. +# Now only 'ja' uses this config value +#html_search_options = {'type': 'default'} + +# The name of a javascript file (relative to the configuration directory) that +# implements a search results scorer. If empty, the default will be used. +#html_search_scorer = 'scorer.js' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'letshelp-letsencryptdoc' + +# -- Options for LaTeX output --------------------------------------------- + +latex_elements = { +# The paper size ('letterpaper' or 'a4paper'). +#'papersize': 'letterpaper', + +# The font size ('10pt', '11pt' or '12pt'). +#'pointsize': '10pt', + +# Additional stuff for the LaTeX preamble. +#'preamble': '', + +# Latex figure (float) alignment +#'figure_align': 'htbp', +} + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, +# author, documentclass [howto, manual, or own class]). +latex_documents = [ + (master_doc, 'letshelp-letsencrypt.tex', u'letshelp-letsencrypt Documentation', + u'Let\'s Encrypt Project', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# If true, show page references after internal links. +#latex_show_pagerefs = False + +# If true, show URL addresses after external links. +#latex_show_urls = False + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_domain_indices = True + + +# -- Options for manual page output --------------------------------------- + +# One entry per manual page. List of tuples +# (source start file, name, description, authors, manual section). +man_pages = [ + (master_doc, 'letshelp-letsencrypt', u'letshelp-letsencrypt Documentation', + [author], 1) +] + +# If true, show URL addresses after external links. +#man_show_urls = False + + +# -- Options for Texinfo output ------------------------------------------- + +# Grouping the document tree into Texinfo files. List of tuples +# (source start file, target name, title, author, +# dir menu entry, description, category) +texinfo_documents = [ + (master_doc, 'letshelp-letsencrypt', u'letshelp-letsencrypt Documentation', + author, 'letshelp-letsencrypt', 'One line description of project.', + 'Miscellaneous'), +] + +# Documents to append as an appendix to all manuals. +#texinfo_appendices = [] + +# If false, no module index is generated. +#texinfo_domain_indices = True + +# How to display URL addresses: 'footnote', 'no', or 'inline'. +#texinfo_show_urls = 'footnote' + +# If true, do not generate a @detailmenu in the "Top" node's menu. +#texinfo_no_detailmenu = False + + +intersphinx_mapping = { + 'python': ('https://docs.python.org/', None), + 'acme': ('https://acme-python.readthedocs.org', None), + 'letsencrypt': ('https://letsencrypt.readthedocs.org', None), +} diff --git a/letshelp-letsencrypt/docs/index.rst b/letshelp-letsencrypt/docs/index.rst new file mode 100644 index 000000000..6b67a2e1f --- /dev/null +++ b/letshelp-letsencrypt/docs/index.rst @@ -0,0 +1,27 @@ +.. letshelp-letsencrypt documentation master file, created by + sphinx-quickstart on Sun Oct 18 13:40:19 2015. + You can adapt this file completely to your liking, but it should at least + contain the root `toctree` directive. + +Welcome to letshelp-letsencrypt's documentation! +================================================ + +Contents: + +.. toctree:: + :maxdepth: 2 + + +.. toctree:: + :maxdepth: 1 + + api + + +Indices and tables +================== + +* :ref:`genindex` +* :ref:`modindex` +* :ref:`search` + diff --git a/letshelp-letsencrypt/docs/make.bat b/letshelp-letsencrypt/docs/make.bat new file mode 100644 index 000000000..006f7825d --- /dev/null +++ b/letshelp-letsencrypt/docs/make.bat @@ -0,0 +1,263 @@ +@ECHO OFF + +REM Command file for Sphinx documentation + +if "%SPHINXBUILD%" == "" ( + set SPHINXBUILD=sphinx-build +) +set BUILDDIR=_build +set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% . +set I18NSPHINXOPTS=%SPHINXOPTS% . +if NOT "%PAPER%" == "" ( + set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS% + set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS% +) + +if "%1" == "" goto help + +if "%1" == "help" ( + :help + echo.Please use `make ^` where ^ is one of + echo. html to make standalone HTML files + echo. dirhtml to make HTML files named index.html in directories + echo. singlehtml to make a single large HTML file + echo. pickle to make pickle files + echo. json to make JSON files + echo. htmlhelp to make HTML files and a HTML help project + echo. qthelp to make HTML files and a qthelp project + echo. devhelp to make HTML files and a Devhelp project + echo. epub to make an epub + echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter + echo. text to make text files + echo. man to make manual pages + echo. texinfo to make Texinfo files + echo. gettext to make PO message catalogs + echo. changes to make an overview over all changed/added/deprecated items + echo. xml to make Docutils-native XML files + echo. pseudoxml to make pseudoxml-XML files for display purposes + echo. linkcheck to check all external links for integrity + echo. doctest to run all doctests embedded in the documentation if enabled + echo. coverage to run coverage check of the documentation if enabled + goto end +) + +if "%1" == "clean" ( + for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i + del /q /s %BUILDDIR%\* + goto end +) + + +REM Check if sphinx-build is available and fallback to Python version if any +%SPHINXBUILD% 2> nul +if errorlevel 9009 goto sphinx_python +goto sphinx_ok + +:sphinx_python + +set SPHINXBUILD=python -m sphinx.__init__ +%SPHINXBUILD% 2> nul +if errorlevel 9009 ( + echo. + echo.The 'sphinx-build' command was not found. Make sure you have Sphinx + echo.installed, then set the SPHINXBUILD environment variable to point + echo.to the full path of the 'sphinx-build' executable. Alternatively you + echo.may add the Sphinx directory to PATH. + echo. + echo.If you don't have Sphinx installed, grab it from + echo.http://sphinx-doc.org/ + exit /b 1 +) + +:sphinx_ok + + +if "%1" == "html" ( + %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/html. + goto end +) + +if "%1" == "dirhtml" ( + %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml. + goto end +) + +if "%1" == "singlehtml" ( + %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml. + goto end +) + +if "%1" == "pickle" ( + %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the pickle files. + goto end +) + +if "%1" == "json" ( + %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can process the JSON files. + goto end +) + +if "%1" == "htmlhelp" ( + %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run HTML Help Workshop with the ^ +.hhp project file in %BUILDDIR%/htmlhelp. + goto end +) + +if "%1" == "qthelp" ( + %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; now you can run "qcollectiongenerator" with the ^ +.qhcp project file in %BUILDDIR%/qthelp, like this: + echo.^> qcollectiongenerator %BUILDDIR%\qthelp\letshelp-letsencrypt.qhcp + echo.To view the help file: + echo.^> assistant -collectionFile %BUILDDIR%\qthelp\letshelp-letsencrypt.ghc + goto end +) + +if "%1" == "devhelp" ( + %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. + goto end +) + +if "%1" == "epub" ( + %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The epub file is in %BUILDDIR%/epub. + goto end +) + +if "%1" == "latex" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + if errorlevel 1 exit /b 1 + echo. + echo.Build finished; the LaTeX files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdf" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "latexpdfja" ( + %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex + cd %BUILDDIR%/latex + make all-pdf-ja + cd %~dp0 + echo. + echo.Build finished; the PDF files are in %BUILDDIR%/latex. + goto end +) + +if "%1" == "text" ( + %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The text files are in %BUILDDIR%/text. + goto end +) + +if "%1" == "man" ( + %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The manual pages are in %BUILDDIR%/man. + goto end +) + +if "%1" == "texinfo" ( + %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo. + goto end +) + +if "%1" == "gettext" ( + %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The message catalogs are in %BUILDDIR%/locale. + goto end +) + +if "%1" == "changes" ( + %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes + if errorlevel 1 exit /b 1 + echo. + echo.The overview file is in %BUILDDIR%/changes. + goto end +) + +if "%1" == "linkcheck" ( + %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck + if errorlevel 1 exit /b 1 + echo. + echo.Link check complete; look for any errors in the above output ^ +or in %BUILDDIR%/linkcheck/output.txt. + goto end +) + +if "%1" == "doctest" ( + %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest + if errorlevel 1 exit /b 1 + echo. + echo.Testing of doctests in the sources finished, look at the ^ +results in %BUILDDIR%/doctest/output.txt. + goto end +) + +if "%1" == "coverage" ( + %SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage + if errorlevel 1 exit /b 1 + echo. + echo.Testing of coverage in the sources finished, look at the ^ +results in %BUILDDIR%/coverage/python.txt. + goto end +) + +if "%1" == "xml" ( + %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The XML files are in %BUILDDIR%/xml. + goto end +) + +if "%1" == "pseudoxml" ( + %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml + if errorlevel 1 exit /b 1 + echo. + echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml. + goto end +) + +:end diff --git a/letshelp-letsencrypt/readthedocs.org.requirements.txt b/letshelp-letsencrypt/readthedocs.org.requirements.txt new file mode 100644 index 000000000..898d2716e --- /dev/null +++ b/letshelp-letsencrypt/readthedocs.org.requirements.txt @@ -0,0 +1,10 @@ +# readthedocs.org gives no way to change the install command to "pip +# install -e .[docs]" (that would in turn install documentation +# dependencies), but it allows to specify a requirements.txt file at +# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259) + +# Although ReadTheDocs certainly doesn't need to install the project +# in --editable mode (-e), just "pip install .[docs]" does not work as +# expected and "pip install -e .[docs]" must be used instead + +-e letshelp-letsencrypt[docs] diff --git a/letshelp-letsencrypt/setup.py b/letshelp-letsencrypt/setup.py index a83fc8843..a63e0aad4 100644 --- a/letshelp-letsencrypt/setup.py +++ b/letshelp-letsencrypt/setup.py @@ -14,6 +14,11 @@ if sys.version_info < (2, 7): else: install_requires.append('mock') +docs_extras = [ + 'Sphinx>=1.0', # autodoc_member_order = 'bysource', autodoc_default_flags + 'sphinx_rtd_theme', +] + setup( name='letshelp-letsencrypt', version=version, @@ -41,6 +46,9 @@ setup( packages=find_packages(), include_package_data=True, install_requires=install_requires, + extras_require={ + 'docs': docs_extras, + }, entry_points={ 'console_scripts': [ 'letshelp-letsencrypt-apache = letshelp_letsencrypt.apache:main', diff --git a/readthedocs.org.requirements.txt b/readthedocs.org.requirements.txt index 3c3a3c576..27cccb0a6 100644 --- a/readthedocs.org.requirements.txt +++ b/readthedocs.org.requirements.txt @@ -7,9 +7,4 @@ # in --editable mode (-e), just "pip install .[docs]" does not work as # expected and "pip install -e .[docs]" must be used instead --e acme -e .[docs] --e letsencrypt-apache --e letsencrypt-nginx --e letsencrypt-compatibility-test --e letshelp-letsencrypt