* try the easy thing of just doing what the error message says
* temporarily add deploy stage to extended tests to see if it uploads properly
* follow instructions on https://forum.snapcraft.io/t/snapcraft-authentication-options/30473
* just run the packaging jobs for speed
* fix formatting
* import changes from test- branch and revert temporary changes
* Update instructions in deploy-stage.yml
It was previously 5.5 hours, which was just to have an exception thrown
before Azure's 6 hour timeout. Generally we aren't seeing this step take
more than 45 minutes, so 90 minutes seems like more than enough.
* Remove Windows 2016 environment, generate 64 bit installer
* Add note to changelog
* Use win_amd64 as installer suffix
* Bump PYTHON_BITNESS to 64
* Require 64 bit Windows for the installer_build job
* Update certbot install path
* update windows test name
* Base installer suffix on PYTHON_BITNESS again
* Update changelog to request users uninstall old version
The reason I want to do this is many of the targets of `test_sdists.sh` use Python 3.6 which [has reached its EOL](https://www.python.org/dev/peps/pep-0494/#lifespan). We could instead just stop running the test on these systems or install a newer version of Python 3 outside of OS packaging, but instead I decided to look into why we have these tests to begin with.
I introduced these tests many years ago in https://github.com/certbot/certbot/pull/4089 as a fix for https://github.com/certbot/certbot/issues/4044. Essentially the problem was the way packagers ran tests and the way we ran tests were slightly different. This difference could cause test failures when distros tried to run tests on our packages.
Since I did this, [we've switched to telling packagers to run tests using `pytest` like we do](https://github.com/certbot/certbot/blob/5e76669c5026732d1440e39e93b58220ef7bd354/certbot/docs/packaging.rst#notes-for-package-maintainers) and we've greatly reduced our reliance on OS packaging through things like `snap`.
Because of this, I think we should stop running this test, reducing our reliance on the heavy "test farm tests", and simplifying our CI pipeline. I think future problems here is quite unlikely and even if we have them, it should only affect tests on our non-primary distribution mechanisms which I think is a very minor concern.
When reviewing this PR, it's probably worth noting that I just replaced `targets.yaml` with the contents of `apache2_targets.yaml` since the Apache 2 tests are the only runs we're running with this change.
Fixes https://github.com/certbot/certbot/issues/9058.
The changes to the CI config are equivalent to the ones made in https://github.com/certbot/certbot/pull/8460.
Other than ignoring some warnings raised by botocore, the main additional work that had to be done here was switching away from using `distutils.version.LooseVersion` since the entire `distutils` module was deprecated in Python 3.10. To do that, I took a few different approaches:
* If the version strings being parsed are from Python packages such as Certbot or setuptools, I switched to using [pkg_resources.parse_version](https://setuptools.pypa.io/en/latest/pkg_resources.html#parsing-utilities) from `setuptools`. This functionality has been available since [setuptools 8.0 from 2014](https://setuptools.pypa.io/en/latest/history.html#id865).
* If the version strings being parsed are not from Python packages, I added code equivalent to `distutils.version.LooseVersion` in `certbot.util.parse_loose_version`.
* The code for `CERTBOT_PIP_NO_BINARY` can be completely removed since that variable isn't used or referenced anywhere in this repo.
* add python 3.10 support
* make some version changes
* don't use looseversion in setup.py
* switch to pkg_resources
* deprecate get_strict_version
* fix route53 tests
* remove unused CERTBOT_PIP_NO_BINARY code
* stop using distutils in letstest
* add unit tests
* more changelog entries
It seems that all required pre-compiled wheels to install Certbot on Python 3.9 on Windows are present.
This PR upgrades Windows tests on Python 3.9 and repackages the installer on this version of Python.
This PR is a new approach for fixing #8732 based on the discussions occurred in the first PR #8877.
This PR upgrades python-augeas to the latest version, and avoids tests failure of Windows because of this upgrade. To do so it leverages the [tox multi-platform feature](https://tox.readthedocs.io/en/latest/example/platform.html) and modifications to `tools/venv.py` in order to not install and not test `certbot-apache` on Windows.
* Unpin python-augeas and upgrade current pinnings
* Do not install certbot-apache in Windows dev environments
* Introduce tox specific win packages + remove certbot compatibility on windows
* Add libaugeas to sphinx build
* Redefine lint and mypy targets
* Keep the lint and mypy environments
I think we should use our `pip_install*` scripts wherever we can and I'm not quite sure yet if I'd call `repoze.sphinx.autointerface` unmaintained.
* use pip_install_editable
* update sphinx comment
Since Saturday the CI pipeline is failing due to several Sphinx errors. See https://dev.azure.com/certbot/certbot/_build/results?buildId=3928&view=logs&j=d74e04fe-9740-597d-e9fa-1d0400037dfd&t=dde413a4-f24c-59a0-9684-e33d79f9aa02
First, the build of certbot-dns-google is failing because of a particular configuration. It seems that this configuration has been written here to activate the support of the RST instruction `.. code-block:: json` in documentation. However, it does not seem to be necessary for a similar situation in certbot-dns-route53 documentation. So let's try to remove it and fix the Sphinx builds.
Second, Sphinx builds were not pinning dependencies, so Sphinx 4.x (that has been released yesterday) started to be used in the pipeline. Sadly this new version is not compatible with the plugin `repoze.sphinx.autointerface`, used to extract documentation from `zope.interface`. So I fixed the pinning and also explicitly pin Sphinx to 3.5.x for now.
Technically speaking the second action is sufficient to fix the first error, but I keep the dedicated solution because it improves the documentation in my opinion.
This situation could be fixed by not requiring `repoze.sphinx.autointerface`, but this is possible only if we remove `zope.interface` from Certbot. Luckily I started the work few days ago ;).
* Remove explicit lexer call in certbot-dns-google doc builds.
* Write a valid JSON file in the documentation
* Apply constraints to sphinx build environments
* Pin Sphinx to 3.5.4
* Update dependencies
* Pin traitlets
* Move version.py to tests/letstest since it's used by test_sdists.sh
* Delete unused components of certbot-auto
* Remove test_leauto_upgrades.sh and references to it
* Remove test_letsencrypt_auto_certonly_standalone.sh and references to it
* Remove outstanding references to certbot-auto
* Remove references to letsencrypt-auto
* find certbot in the correct directory
* delete letsencrypt-auto-source line from .isort.cfg since that directory no longer contains any python code
* remove (-auto) from certbot(-auto)
* delete line from test
* Improve style for version.py
Fixes#8425
This PR upgrades mypy to the latest version available, 0.812.
Given the advanced type inference capabilities provided by this newer version, this PRs also fixes various type inconsistencies that are now detected. Here are the non obvious changes done to fix types:
* typing in mixins has been solved using `Protocol` classes, as recommended by mypy (https://mypy.readthedocs.io/en/latest/more_types.html#mixin-classes, https://mypy.readthedocs.io/en/stable/protocols.html)
* `cast` when we are playing with `Union` types
This PR also disables the strict optional checks that have been enable by default in recent versions of mypy. Once this PR is merged, I will create an issue to study how these checks can be enabled.
`typing.Protocol` is available only since Python 3.8. To keep compatibility with Python 3.6, I try to import the class `Protocol` from `typing`, and fallback to assign `object` to `Protocol` if that fails. This way the code is working with all versions of Python, but the mypy check can be run only with Python 3.8+ because it needs the protocol feature. As a consequence, tox runs mypy under Python 3.8.
Alternatives are:
* importing `typing_extensions`, that proposes backport of newest typing features to Python 3.6, but this implies to add a dependency to Certbot just to run mypy
* redesign the concerned classes to not use mixins, or use them differently, but this implies to modify the code itself even if there is nothing wrong with it and it is just a matter of instructing mypy to understand in which context the mixins can be used
* ignoring type for these classes with `# type: ignore` but we loose the benefit of mypy for them
* Upgrade mypy
* First step for acme
* Cast for the rescue
* Fixing types for certbot
* Fix typing for certbot-nginx
* Finalize type fixes, configure no optional strict check for mypy in tox
* Align requirements
* Isort
* Pylint
* Protocol for python 3.6
* Use Python 3.9 for mypy, make code compatible with Python 3.8<
* Pylint and mypy
* Pragma no cover
* Pythonic NotImplemented constant
* More type definitions
* Add comments
* Simplify typing logic
* Use vararg tuple
* Relax constraints on mypy
* Add more type
* Do not silence error if target is not defined
* Conditionally import Protocol for type checking only
* Clean up imports
* Add comments
* Align python version linting with mypy and coverage
* Just ignore types in an unused module
* Add comments
* Fix lint
* Pin pynsist
* Update dependencies
* Set windows installer a proper python project
* Optimize usage of the venvs
* Add windows-installer when venv is set up
* Fix call
* Remove env marker
Fixes#8700
Now that `snapcraft remote-build` truly uses new builds for each call, we can split the builds to have a dedicated Azure job for each target architecture. This PR does that.
* Split snap_build job on each architecture
* Also parallelize the publish_snap jobs over each architecture
Fixes#8389#8584.
This PR makes the necessary modifications to officially drop Python 2 support in the Certbot project.
I did not remove the specific Python 2 compatibility branches that has been added in various places in the codebase, to reduce the size of this PR and this will be done in a future one
* Update classifiers and python_requires in setup.py
* Remove warnings about Python 2 deprecation
* Remove Azure jobs on Python 2.7
* Remove references to python 2 in documentation
* Pin dnspython to 2.1.0
* Update changelog
* Remove warning ignore
Fixes https://github.com/certbot/certbot/issues/8580.
With this PR, it should now be possible to run the oldest tests natively on Linux, at least when using an older version of Python 3, which hasn't been possible in a long time. Unfortunately, this isn't possible on macOS which I opened https://github.com/certbot/certbot/issues/8589 to track.
You can see the full test suite running with these changes at https://dev.azure.com/certbot/certbot/_build/results?buildId=3283&view=results.
I took the version numbers for the packages I updated by searching for the oldest version of the dependency I think we should try and support based on the updated comments at the top of `oldest_constraints.txt`. While kind of annoying, I think it'd be a good idea for the reviewer to double check that I didn't make a mistake with the versions I used here.
To find these versions, I used https://packages.ubuntu.com, https://packages.debian.org, and a CentOS 7 Docker image with EPEL 7 installed. For the latter, not all packages are available in Python 3 yet (which is something Certbot's EPEL package maintainers are working on) and in that case I didn't worry about the system because I think they can/will package the newest version available. If they end up hitting any issues here when trying to package Certbot on Python 3, we can always work with them to fix it.
* remove py27 from oldest name
* update min cryptography version
* remove run_oldest_tests.sh
* upgrade setuptools and pyopenssl
* update cffi, pyparsing, and idna
* expand oldest_constraints comments
* clarify oldest comment
* update min configobj version
* update min parsedatetime version
* quote tox env name
* use Python 3.6 in the oldest tests
* use Python 3.6 for oldest integration tests
* properly pin asn1crypto
* update min six version
* set basepython for a nicer error message
* remove outdated python 2 oldest constraints
* clean up some Sphinx warnings
* first attempt at a doc-test pipeline job
* fix formatting
* fix test name
* set env for bash
* try bash vs script
* maybe it didn't like me setting 'PATH'...derp
* drop use of venv
* sphinx-build isn't a py script
* try activating venv
* docs: remove unused html_static tags
* clean up final sphinx build errors for certbot
* clean up final sphinx build errors for acme
* better names for docs pipeline
* fix spelling
* add docs_extras to setup.py
* remove temp doc-testing pipeline; add template to main.yml
* rearrange pipeline execution; run sphinx builds in one job
* add documentation note to compat.os
* add uninstall.rst as a sub-toctree to avoid build error
Now that we have a new pipstrap script with recent version of pip, dependencies for Windows can be resolved correctly on Python 3.8.
This PR enables tests on Python 3.8, and package Certbot for Windows on Python 3.8 also. I do not move up to Python 3.9 since some dependencies (`cryptography`, `pynacl`) do not provide wheels for Python 3.9 yet on Windows, which would require a complete C++ build system to compile them.
* Enable windows tests on Python 3.8 and package it on Python 3.8 also.
* Upgrade pynsist, nsis and pywin32, remove old workarounds
Co-authored-by: Brad Warren <bmw@users.noreply.github.com>
This PR adds a `--timeout` flag to `tools/snap/build_remote.py` in order to fail the process if the time execution reaches the provided timeout. It is set to 5h30 on the relevant Azure job, while the job itself has a timeout of 6h managed on Azure side. This allows a slightly better output for these jobs when the snapcraft build stales for any reason.
Fixes https://github.com/certbot/certbot/issues/8134.
* Test on Python 3.9.
* Mention Python 3.9 support in changelog.
* s/\( *'Pro.*3\.\)8\(',\)/\18\2\n\19\2/
* undo changes to tox.ini
* Move more tests to Python 3.9
* Update PyYAML and packages which pinned it back
* Upgrade typed-ast
* Use <= to "pin" dnspython
* Fix lint by telling pylint it cannot be trusted
* Disable mypy on RFC plugin
* add comment about <= support
* tests: add certbot-dns-rfc2136 integration tests
* dont use 'with' form of socket.socket
fixes py2 crash
* address some feedback:
- conftest: make DNS server a global resource
- conftest: add dns_xdist parameter into node config
- conftest: add --dns-server=bind flag
- conftest: if configured, point the ACME server to the DNS server
- dnsserver: make it sort-of compatible with xdist (future-proofing)
- context: parameterize dns-rfc2136 credentials file (future proofing)
- context: reduce dns-rfc2136 propagation time to speed up tests
- tox: add a integration-dns-rfc2136 target
- rfc2136: add a test/zone for subdelegation
- rfc2136: skip tests if no DNS server is configured
* try add integration-dns-rfc2136 to CI
* mock recursive dns via RPZ
* update --dns-server args and tox.ini args
* address more feedback:
- dns_server: rename rfc2136 creds file to .tpl
- dns_server: dont vary dns server port, instead we will vary zone names (#8455)
- dns_server: log error if bind9 fails to stop cleanly
- dns_server: replace assert with raise
- context: remove redundant _worker_id
- context: remove redundant cleanup override
- context: fix seek/flush in credentials context manager
- context: rename skip_if_no_server -> ...bind_server
- context: add newline EOF
* conftest: document _setup_primary_node sideeffects
* ci: rfc2136-integration from standard->nightly
* fix _stop_bind (function was renamed to stop)
* ignore errors from shutil.rmtree during cleanup
* dns_server: check for crash while polling
* remove --dry-run from rfc2136 test
Do we have any specific reason to run the standard Linux integration tests on Python 2.7?
If not, we should move to a more recent version of Python. This PR does it for Python 3.8.
* Add a new, simplified version of pipstrap.
* Use tools/pipstrap.py
* Uncomment code
* Refactor pip_install.py and provide hashes.
* Fix test_sdists.sh.
* Make code work on Python 2.
* Call strip_hashes.py using Python 3.
* Pin the oldest version of httplib2 used in distros
* Strip enum34 dependency.
* Remove pip pinnings from dev_constraints.txt
* Correct pipstrap docstring.
* Don't set working_dir twice.
* Add comments
Fixes#8202
This PR adds an Azure Pipeline job to execute certbot plugins --prepare for each Docker image created during the CI on amd64.
* Prepare basic integration tests for certbot dockers
* Add a displayName for the integration tests task
* add set -e to all bash instances in deploy-stage.yml
* retry uploading snap if we fail
* Add the rest of the set -e calls for bash in azure while we're here
* use retry based on travis_retry
* add set -e to the script: sections that run on macOS/Linux
* actually don't fail on result
* reset result before running command because bash short circuits or conditionals
* remove inapplicable comment
Partial fix for #8256
This PR makes tox calls pipstrap before any commands is executed, and Azure Pipelines calls pipstrap when appropriate (when an actual call to pip is done).
* Invoke pipstrap in tox and during the CI
* Set default value for PYTHON_VERSION and always set python interpreter
* Set Python for snaps_build also
* Fix the build for Windows installer
* Add a warning comment for pinned versions in pipstrap
* Rebuild letsencrypt-auto
* Same version than the installer build
* Let's update to latest pip for installer tests
Fixes https://github.com/certbot/certbot/issues/8022, https://github.com/certbot-docker/certbot-docker/issues/25, and https://github.com/certbot-docker/certbot-docker/issues/20.
This PR builds on https://github.com/certbot/certbot/pull/8192 to set up similar builds in Azure to what we currently have at release time as well as nightly builds allowing us to catch problems in these images before a release. It also fully automates our Docker deployments removing a manual step from our release process. We'll need to update our release instructions once this PR lands.
If you're not familiar with our `certbot-docker` setup, you can read about how these scripts customized the build process on Docker Hub at https://docs.docker.com/docker-hub/builds/advanced/.
You can see the process working properly at:
* Nightly build on my fork: https://dev.azure.com/bmw0523/bmw/_build/results?buildId=345&view=logs&j=70ac378a-cb1f-50d1-b328-169807afbcfa
* Release build on my fork: https://dev.azure.com/bmw0523/bmw/_build/results?buildId=346&view=logs&j=70ac378a-cb1f-50d1-b328-169807afbcfa
* Nightly build on Certbot's Azure setup: https://dev.azure.com/certbot/certbot/_build/results?buildId=2426&view=logs&j=70ac378a-cb1f-50d1-b328-169807afbcfa
The builds on my fork pushed to https://hub.docker.com/u/certbottest. The credentials for this account are in our shared vault in 1password if you want to play around with this.
While the scripts will (almost?) always be run in CI, I tested the scripts successfully on macOS, Ubuntu 18.04, and Ubuntu 20.04, however, **the scripts do not seem to work when using the Docker snap, at least on Ubuntu 20.04.** It does work with the `docker.io` packages from `apt`. I was able to make things work by no longer setting `DOCKER_BUILDKIT`, but as I described in the code comments, this breaks things on Azure.
When writing this PR, I tried to make the minimal modifications to our current set up to get the behavior we want. I'm planning on working on splitting the Docker builds into different Azure jobs so it doesn't increase the overall build time, but this isn't trivial so I figured it would be best done in a separate PR.
* Remove license.
* update build scripts
* write deploy code
* Remove unused READMEs.
* rewrite readme
* Make testing on a fork easier.
* Set up Azure automation.
* fix typo
* Make output more verbose.
* clean up cleanup...everybody everywhere
* separate build and deploy
* Document docker-hub credentials
* Use Docker BuildKit when building.
* Remove unneeded .gitignore files.
* Fix tools/docker/README.md grammar
Co-authored-by: ohemorange <ebportnoy@gmail.com>
* Clarify <TAG> in README.
* no docker snap
* rename docker job
Co-authored-by: Erica Portnoy <ebportnoy@gmail.com>
